···
Log in / Register

How to Control Speed Poorly When Practicing Automatic Transmission?

4 Answers
LaMaggie
07/29/25 3:59pm

Here are the solutions for poor speed control when practicing automatic transmission: 1. Maintain a good mindset: A positive attitude is the foundation for good driving practice and should be maintained during future driving to calmly handle dangers. 2. Practice repeatedly to find the right feel: Wear thin-soled shoes during practice for better sensitivity and avoid stomping on the accelerator. 3. Seek help from the instructor: A good instructor can help students quickly master driving skills. If speed control remains an issue, ask more questions to identify and fill gaps for improvement.

Was this review help?
11
3
Share
DeArya
08/15/25 4:04am

As a beginner learning to drive an automatic transmission car, I initially found it very difficult to control the speed, often pressing the accelerator too hard and causing the car to suddenly surge forward. Later, I learned to practice repeatedly in safe places like parking lots: starting from a standstill by gently pressing the accelerator to increase pressure, allowing the car to slowly accelerate to 30 kilometers per hour, then keeping my foot steady to maintain the speed; if it was too fast, I would gently release the accelerator or lightly touch the brake to smoothly decelerate. Remember not to rush for quick success, focus on the foot feel rather than the speedometer, and reduce stiffness in hands and feet when nervous. After practicing for half an hour daily for a week, I improved significantly, because automatic transmission cars are simpler than manual ones but much more sensitive to throttle response, where subtle operations can significantly enhance control. I recommend combining daily driving, such as commuting routes, to practice maintaining a steady speed and cultivate a natural sense of rhythm.

Was this review help?
10
2
Share
Expand All
AdrianaRose
10/12/25 5:06am

From years of automatic transmission driving experience, unstable speed often stems from rough operation; I have tips to help beginners get started easily: think of the accelerator pedal as a regulator, applying gradual and gentle pressure rather than stomping or pressing deeply. When practicing steady-speed driving on straight roads, maintain a fixed speed like 40km/h by slightly adjusting the pedal depth with your toes, while keeping your heel firmly planted to reduce shaking; if there are driving mode options like Eco, select it to soften the response. Speed fluctuations are also related to road condition anticipation; I often release the accelerator early to coast and decelerate, avoiding sudden braking that causes drastic speed changes. Driving more will naturally develop the habit—I also struggled at first, but now my urban commuting is as steady as a rock, the key is patience and consistent short-term training.

Was this review help?
16
3
Share
Expand All
Gayle
11/25/25 6:09am

When instructing students, I emphasize that foot coordination is the key to controlling speed: have them practice slow, straight-line driving in an open area, gradually accelerating and then naturally decelerating in a cyclic process. The focus is on using the right foot to gently press the accelerator, starting with light pressure to maintain around 20km/h. If accelerating too much, slightly lift the foot or use the toes to lightly touch the brake for fine-tuning balance—avoid sudden movements. The characteristic of automatic transmissions is their sensitive response, so a light touch is enough to speed up. I advise beginners to focus on smooth transitions rather than chasing speed. During practice, combine this with checking tire pressure or seat position to ensure comfortable operation—most students improve quickly over time with this approach.

Was this review help?
12
2
Share
Expand All
More Forum Discussions

Where to add water to the Chevrolet Malibu XL radiator?

Steps to add water to the Malibu XL radiator are as follows: 1. Turn the pressure cap counterclockwise. If a hissing sound is heard, wait until the sound disappears before opening; 2. Add an appropriate amount of coolant into the coolant expansion tank, ensuring the level is between the MAX and MIN marks on the tank; 3. Start the engine with the coolant expansion tank cap open; 4. After starting the engine, the coolant level in the tank will gradually decrease. At this point, add an appropriate amount of coolant to the expansion tank until the level reaches between the MAX and MIN marks on the coolant expansion tank; 5. Reinstall the cap, ensuring the pressure cap is hand-tightened and fully seated.
18
4
Share

What Causes Abnormal Noise in Car Air Conditioners?

Reasons for abnormal noise in car air conditioners: 1. Lack of lubricating refrigerant oil inside the compressor, causing metal friction sounds when the compressor's electromagnetic clutch engages. 2. Abnormal noise due to excessive tension on the air conditioning belt. 3. Faulty electromagnetic clutch, with damaged internal bearings producing abnormal noise. The following is an introduction to the car air conditioning system: The car air conditioning system is a device that cools, heats, ventilates, and purifies the air inside the vehicle. It includes cooling devices, heating devices, and ventilation devices. This combined system makes full use of the limited space inside the car, with a simple structure that is easy to operate. The air conditioning system can provide a comfortable environment for passengers and reduce driver fatigue.
12
2
Share

Will there be any problems if the Verano's chassis is hit while driving?

Hitting the chassis while driving the Verano can cause problems. Below are the main impacts of chassis scraping during driving: 1. Fuel tank - Impact can deform the fuel tank. 2. Wiring - Some wiring is located on the chassis, which may lead to wiring failures. 3. Exhaust pipe - Frequent impacts can damage the exhaust pipe. 4. Engine oil pan - Wear can affect engine performance. Here is additional information: 1. The chassis typically refers to the automobile chassis, which is the main framework of the vehicle's underside. All power components of the vehicle, including the engine, transmission, differential, and suspension system, are installed on the chassis. 2. The chassis serves to support and install the car engine and its various components and assemblies, forming the overall shape of the vehicle. It receives the engine's power to enable movement and ensure normal driving. Additionally, a good chassis can safeguard the driver's life.
8
1
Share

How to turn on the rear wiper of Honda CR-V

Here are the methods to turn on the rear wiper of Honda CR-V: 1. Push the wiper lever backward (press down to the first gear) to activate the rear window wiper. 2. Lift the wiper lever upward to activate the front wiper spray, and pull the wiper lever downward to activate the rear wiper spray (for cleaning the glass water). More information about Honda CR-V is as follows: 1. Honda CR-V is a compact SUV with a 1.5T L4 engine and turbocharged intake. 2. The dimensions of this car are 4621mm in length, 1855mm in width, and 1679mm in height, with a wheelbase of 2661mm. The body type is a 5-door, 5-seat SUV, equipped with a 6-speed manual transmission and front-wheel drive.
9
1
Share

Why Can't the Car Key Be Turned?

Reasons why the car key can't be turned: The car key may not turn because the steering wheel has automatically locked. This is part of the car's automatic anti-theft system. When the vehicle is turned off, the steering lock pin engages with the steering column, preventing the steering wheel from moving. Even if the key is inserted, it cannot be turned. This is a safety feature designed to protect the vehicle. Here are some solutions: If the car key cannot be turned, you can unlock the steering wheel by inserting the mechanical key, pressing the brake pedal, and then gently turning the steering wheel. Although the steering wheel is locked, it can still be moved slightly. While turning the steering wheel, turn the key at the same time to complete the steering wheel unlocking process. At this point, the vehicle can be started normally.
16
5
Share

How to Replace Brake Pads on a Mercedes-Benz C200?

Mercedes-Benz C200 brake pad replacement steps are as follows: 1. Remove the tire. 2. Loosen the caliper fixing screws and remove the caliper. 3. Release the brake pad clips and take out the brake pads. 4. Use large pliers or a specialized piston pushing tool to push the caliper piston back. 5. Install the new brake pads. 6. Secure the clips and reassemble following the original steps. Additional relevant information is as follows: 1. Brake pads, also known as brake linings, are the most critical safety components in a car's braking system. The effectiveness of all braking is decisively influenced by the brake pads, making high-quality brake pads the protector of both the driver and the vehicle. 2. Brake pads generally consist of a steel plate, an adhesive heat insulation layer, and a friction block. The steel plate is coated to prevent rust, and the coating process is monitored using an SMT-4 oven temperature tracker to ensure the temperature distribution during coating meets quality standards.
15
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.