···
Log in / Register

How to Contact the Car Owner to Move the Vehicle via 114?

3 Answers
MacCole
09/06/25 3:01am
114 hotline staff can inquire the contact number of the car owner through the license plate number and notify the owner to come and move the vehicle. Below are the relevant details: 1. 114 vehicle-moving call process: The process usually involves the car owner providing the other party's license plate number to the 114 hotline staff, who then retrieves the contact number of the other car owner through the license plate number and notifies them to come and move the vehicle. 2. Methods to ask the car owner to move the vehicle: When a car owner finds their vehicle blocked by another car and needs to ask the other owner to move it, they can first check if there is a contact number left by the other owner on the windshield. The owner can directly call the contact number to notify the other party to move the car.
Was this review help?
1
5
Share
DiArabella
09/18/25 3:02am
A few days ago, I encountered another parking space being occupied in my neighborhood, so I had to use 114 to contact the car owner to move the vehicle. The method is quite simple: just call 114 directly, tell them you need to contact the owner to move the car, and provide the other party's license plate number. If the owner has registered their information in the 114 system, 114 will help connect or relay the message, and it’s usually resolved quickly. However, not all car owners have registered for this service, so the success rate isn’t 100%. I’ve experienced a few failures, such as the owner not being registered or having incorrect information—in such cases, you’ll need to find other solutions, like asking the property security to assist. Overall, 114 is a fast and convenient tool, ideal for resolving everyday parking disputes, saving you the hassle of involving traffic police. It’s also advisable for car owners to register with 114 in advance to avoid delays when trouble arises.
Was this review help?
2
0
Share
Expand All
IrisAnn
11/01/25 3:29am
I've been driving for many years and often encounter situations where others park haphazardly, blocking the passage. Using 114 to contact the car owner for moving the vehicle is quite straightforward: dial 114, inform the service desk that you need a car moved, and provide the specific license plate number of the vehicle. They will check if the owner has registered their information and then relay the message or make the call for you. This method is effective, and in most cases, the owner arrives within 10 minutes. However, I think it's important to confirm the surrounding signs in advance to avoid using this method in no-parking zones, as it could easily lead to unnecessary conflicts. Additionally, if 114 can't reach the owner, you can try noting down the license plate yourself and use alternative methods like checking with the vehicle management office or using an app as a backup. In summary, 114 is my first choice for handling parking issues—it's efficient and hassle-free.
Was this review help?
15
5
Share
Expand All
More Forum Discussions

Can a swollen battery be repaired?

If the float charge voltage is set too high and the charging current is large, it will accelerate the rate of oxygen evolution on the positive plate, which cannot be recombined at the negative plate in time. At the same time, the temperature inside the battery rises rapidly. When the exhaust is not timely and the pressure reaches a certain level, the valve-regulated sealed lead-acid battery will bulge and deform. Extended information: If the battery has been used for 4-5 years, it can be considered to sell it as scrap. If the usage time is around 2 years, it can be reused. The severity of the swelling and bulging should be assessed. If it is not severe and there are undamaged plates inside, these plates can be reused. If the bulging is severe, the plates inside may be deformed, in which case the battery should be sold as scrap.
4
3
Share

Can the ETC card be pulled out?

ETC cards can be removed when not in use, but be careful not to pull them out during use, otherwise the ETC system will not work properly. Benefits of installing ETC: Time-saving: eliminates the hassle of waiting in line; Green and eco-friendly: low-carbon, vehicles pass through toll stations without stopping, reducing noise and exhaust emissions, and minimizing pollution; Cost-saving: reduces vehicle start-up and braking frequency, lowering wear and fuel consumption, and users can also enjoy a 5% discount on toll fees; Improved efficiency: ETC lanes can theoretically increase traffic efficiency by 2-3 times, making traditional ETC systems more updated, faster, and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. How ETC works: Through dedicated short-range communication between the on-board electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane at the toll station, computer networking technology is used for back-end settlement processing with the bank, thereby achieving the purpose of vehicles passing through highway or bridge toll stations without stopping to pay fees.
12
2
Share

What Causes a Car to Fail to Engage Gears After Wading Through Water?

After a vehicle wades through water, moisture may seep between the clutch plates, causing them to stick together. This can result in difficulty shifting gears while driving, an inability to engage gears, or gear collision noises inside the transmission. These symptoms are likely caused by water entering the clutch system. Below are some methods to prevent water ingress during the rainy season: 1. Avoid driving in the rain as a precaution: Try not to drive during rainy weather, especially heavy storms, as wet roads and poor visibility increase the risk of accidents. 2. Park on higher ground when possible: During heavy rain or flooding, park your car in elevated areas and avoid locations prone to water accumulation, such as drainage ditches or underpasses. 3. Exercise caution on unfamiliar roads: If driving through unfamiliar flooded areas like underpasses, do not proceed blindly. Stop and assess the water depth before deciding whether to proceed. 4. Drive slowly through water: After entering a flooded area, reduce speed and proceed cautiously. Driving too fast may cause water to splash into the air intake, leading to engine stalling. For manual transmission vehicles, it is advisable to shift to a lower gear to maintain high engine RPM, which helps the exhaust system push out water and prevents backflow into the engine through the exhaust pipe.
8
1
Share

How long is the Volvo S90?

Volvo S90 has a length, width, and height of 5090mm/1879mm/1450mm respectively, with a wheelbase of 3061mm. More details about the Volvo S90 are as follows: 1. Introduction One: The overall shape of the Volvo S90 is grand and expansive, with straight lines complementing its long body, embodying a sense of Nordic luxury. The waistline extending from the headlights to the rear of the car gives a visually full and powerful appearance. 2. Introduction Two: The interior design is very simple and crisp, paired with excellent craftsmanship, reflecting a minimalist sense of luxury. The three-spoke multifunction steering wheel has a full shape and excellent feel. The full LCD instrument panel displays clear and rich content. The vertical central control screen is standard across all models, and its design integrated with the air vents undoubtedly has a strong sense of design. The interior materials are also one of the highlights of the Volvo S90, with the use of a large number of eco-friendly materials alleviating consumer concerns about in-car air quality. 3. Introduction Three: The Volvo S90 is equipped with a combination of 2.0T high and low power engines. The low-power T4 version has a maximum power of 190 horsepower and a peak torque of 300N·M, while the high-power T5 engine delivers a maximum power of 250 horsepower and a peak torque of 350N·M. Both engines are paired with an 8-speed automatic transmission.
18
1
Share

What is the working principle of an automotive solenoid valve?

Automotive solenoid valves operate on the principle that when energized, the electromagnetic coil generates a magnetic force that lifts the closing element off the valve seat, opening the valve. When de-energized, the magnetic force dissipates, and a spring presses the closing element back onto the valve seat, closing the valve. Below are the principles of related solenoid valves: 1. Distributed direct-acting solenoid valve: This combines direct-acting and pilot-operated principles. When there is no pressure difference between the inlet and outlet, energizing the coil directly lifts the pilot valve and main valve closing elements in sequence, opening the valve. When the inlet and outlet reach the starting pressure difference, energizing the coil first opens the pilot valve, increasing pressure in the lower chamber of the main valve and decreasing pressure in the upper chamber, using the pressure difference to push the main valve open. When de-energized, the pilot valve uses spring force or medium pressure to push the closing element downward, closing the valve. 2. Direct-acting solenoid valve: When energized, the electromagnetic coil generates a force that lifts the closing element off the valve seat, opening the valve. When de-energized, the force disappears, and a spring presses the closing element onto the valve seat, closing the valve. 3. Pilot-operated solenoid valve: When energized, the electromagnetic force opens the pilot orifice, rapidly reducing pressure in the upper chamber and creating a pressure difference (low above, high below) around the closing element, allowing fluid pressure to push it upward and open the valve. When de-energized, spring force closes the pilot orifice, and inlet pressure rapidly equalizes through the bypass orifice, creating a reverse pressure difference (high above, low below) that pushes the closing element downward to close the valve.
16
2
Share

How to Handle a Second 12-Point Deduction?

If a driver's license accumulates a second 12-point deduction, the vehicle management office must conduct a road driving skills test within ten days after the driver passes the examination on road traffic safety laws, regulations, and related knowledge. The road driving skills test should be conducted according to the highest permissible vehicle type specified on the driver's license. Additional Information: If the test is passed, the points will be cleared, and the driver's license will be returned. If the test is failed, the driver must continue to participate in study and retake the test. Refusal to participate in study or take the test will result in the traffic management department of the public security authority announcing the suspension of the driver's license.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.