How to Connect Land Rover CarPlay?

1 Answers
LeonardoMarie
07/29/25 3:19pm
Before using CarPlay, you need to prepare an original USB cable. Connect the data cable to the car's USB port, and follow the prompts that appear. The car system will automatically start CarPlay. If the CarPlay interface does not appear on the car's main screen, click the CarPlay icon on your phone to activate the system.
Was this review help?
2
3
Share
More Forum Discussions

What is the Chinese name for Polo?

polo is called Paul in Chinese. Body dimensions: The Volkswagen Polo has body dimensions of 4053mm in length, 1751mm in width, and 1446mm in height, with a wheelbase of 2564mm. Powertrain: The Volkswagen Polo is equipped with three gasoline engines (1.0L/1.0T/1.5T) and one 1.6T diesel engine, with maximum power ranging from 48kW (65PS) to 110kW (150PS). It is paired with a 6-speed manual transmission, a 6-speed automatic transmission, and a 7-speed dual-clutch transmission. Features: Except for the base model, all trims come standard with ESP.
14
2
Share

What does the Sagitar fuel pump recall mean?

Fuel pump recall refers to the process where the manufacturer of defective automotive products eliminates the defects in their products in accordance with legal requirements and procedures when the fuel pump is found to have faults. Fuel pump faults: Can cause the engine to stall while driving, posing safety hazards; the fuel pump is a fundamental component in the engine's fuel supply system. During engine operation, it draws fuel from the car's fuel tank and continuously delivers it to the engine at a certain pressure through the fuel lines. The fuel is then subjected to secondary pressurization by the high-pressure fuel pump and supplied to each cylinder in accordance with the engine's working sequence. When the fuel pump malfunctions, the issue can be diagnosed by checking the fuel pump's working current using a digital multimeter. Start the engine, and while the fuel pump is operating, press the dynamic record key on the multimeter to record the maximum and minimum current values during the fuel pump's operation. Comparing these values with normal data can help determine the cause of the fault. Automotive recall system: This system requires that if a car released to the market is found to have defects due to design or manufacturing issues, which do not comply with relevant regulations and standards, leading to safety and environmental problems, the manufacturer must promptly report the product's issues, the causes of the problems, and improvement measures to the relevant national authorities. The manufacturer must then apply for a recall and, upon approval, modify the vehicles in use to eliminate potential hazards.
17
0
Share

Which is better, front-wheel drive or rear-wheel drive?

Comparison between front-wheel drive and rear-wheel drive: 1. In terms of driving method: Front-wheel drive vehicles are front-engine front-wheel drive, with only the front wheels responsible for driving; Rear-wheel drive vehicles are front-engine rear-wheel drive, with the rear wheels responsible for driving. 2. In terms of climbing ability: The vehicle's center of gravity angle in front-wheel drive vehicles affects the uphill speed; The center of gravity angle in rear-wheel drive vehicles is at the rear of the body, so the front wheels lack weight pressing on them, resulting in relatively faster speed. 3. In terms of interior space: Most front-wheel drive vehicles use a transverse engine and are positioned forward, providing larger interior space; Rear-wheel drive vehicles use a longitudinal engine, so with the same wheelbase, the interior space of rear-wheel drive vehicles is smaller. 4. In terms of turning ability: The front wheels of front-wheel drive vehicles are responsible for both driving and steering, and due to the forward position of the engine, the front is heavy and the rear is light, making understeer more likely during sharp turns; Rear-wheel drive vehicles have a light front and heavy rear, making oversteer, or tail flicking, more likely during turns.
13
3
Share

What are the causes of tire wear?

Tire wear reasons are as follows: 1. Large differences in tire pressure; Significant variations in pressure among tires can cause uneven wear. Tire pressure is critical - both overinflation and underinflation will shorten tire lifespan. If only the center wears faster with normal shoulder wear, it's caused by overinflation. If shoulder wear is excessive with normal center wear, it's due to underinflation. 2. Inaccurate wheel alignment; If the four wheels aren't properly aligned to required horizontal and vertical axes, tires on the same side may experience abnormal wear during driving. This occurs because the vehicle's self-correction creates abnormal friction on certain tire areas, accelerating wear. Toe angles that are too small or large cause sawtooth-shaped shoulder wear. Excessive smooth wear on a single shoulder indicates incorrect camber angles. 3. Steering gear or brake system malfunctions. During vehicle use, regular tire rotation is necessary. Since front and rear tires wear differently, owners should rotate tires in a cross pattern after certain mileage to ensure even wear distribution and extend service life.
12
5
Share

How is the new Santana 1.4?

The following is an introduction to the new Santana 1.4: 1. Engine and transmission. The Santana manual comfort version is equipped with a 1.4L engine, with a maximum power of 90 horsepower and a maximum torque of 132 Nm, paired with a five-speed manual transmission. Judging from the engine data, although the power is not very abundant, it is sufficient for daily use. The five-speed manual transmission has also undergone long-term testing and has good stability. 2. Exterior. The Santana's body dimensions are 4475/1706/1469mm, with a wheelbase of 2603mm. In terms of body size, as an A-class sedan, its passenger space can meet the needs of daily family use. 3. Chassis. In terms of chassis structure, the front suspension uses a MacPherson independent suspension, and the rear suspension uses a composite torsion beam non-independent suspension. The Santana's chassis tuning is relatively firm, so it performs well in terms of handling. 4. Configuration. The configuration of this model is not very rich. The main safety configurations, such as brake assist, traction control, and body stability system, are not equipped.
13
3
Share

How to Reset the Tire Pressure Warning Light on Lavida?

To address the illuminated dashboard warning light on the Lavida, you need to resolve the vehicle's issue first and then clear the fault code. The dashboard light fuse is located in the fuse box inside the main driver's compartment. The dashboard light may not illuminate due to a damaged instrument cluster or a blown fuse. Below are details about dashboard lights: 1. Indicator Lights: These are the most common lights you encounter while driving, such as turn signals, parking lights, etc. Their purpose is to indicate the status of various vehicle functions. 2. Warning Lights: These serve as alerts, such as the fuel indicator, door status indicator, seatbelt indicator, etc. Typically, warning lights turn off after the driver takes the corresponding action. For example, the seatbelt indicator turns off once the seatbelt is fastened. 3. Fault Indicator Lights: These are the most critical indicators, such as the generator fault light, transmission fault light, etc. These lights rarely come on during normal operation or may briefly illuminate when starting the engine. If a fault indicator light stays on continuously and is accompanied by a warning sound, it indicates that the vehicle has a malfunction or abnormality.
20
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.