How to Connect CarPlay in Mercedes-Benz?

1 Answers
MacJames
07/25/25 1:31am
Methods to connect CarPlay in Mercedes-Benz: 1. Locate the USB port marked with a phone and tablet symbol, usually found near the cigarette lighter or inside the center armrest; 2. Press the TEL button on the panel twice, and the phone function interface will appear on the screen; 3. Connect your phone to the USB port using a data cable, and it should start automatically under normal circumstances. The domestically produced Mercedes-Benz Viano business van has a wheelbase of 3200mm, an interior height of 1338mm, and a width of 1630mm. Within this space measuring 4993mm in length and 1905mm in width, designers have ingeniously arranged five seats. In the factory configuration, the seats in the passenger area are arranged facing each other, a design that facilitates face-to-face communication among vehicle occupants.
Was this review help?
16
2
Share
More Forum Discussions

What suspension does the Ford Mustang use?

Ford Mustang uses MacPherson independent suspension at the front and multi-link independent suspension at the rear, which is a common suspension combination. MacPherson suspension is widely used due to its simple structure and compact size, featuring only one L-shaped control arm that hardly occupies any engine compartment space. Suspension is the device that transmits interaction forces between the frame and the axle, being one of the four major components of a vehicle and a critical element affecting driving performance. The Ford Mustang measures 4778mm in length, 1877mm in width, and 1417mm in height, with a wheelbase of 2720mm.
18
3
Share

What are the differences between Fengxing T5 and Fengxing T5L?

The differences between Fengxing T5 and Fengxing T5L are: 1. Different wheelbase: Fengxing T5 has a wheelbase of 2720mm; Fengxing T5L has a wheelbase of 2753mm; 2. Different exterior design: Fengxing T5L is a mid-size SUV; Fengxing T5 is a compact SUV. The 2020 model of Fengxing T5L uses two engines, one is a 1.5-liter turbocharged engine, and the other is a 1.8-liter turbocharged engine. The 2020 model of Fengxing T5 also uses two engines, one is a 1.6-liter naturally aspirated engine, and the other is a 1.5-liter turbocharged engine.
18
3
Share

What transmission does the Jianghuai Refine use?

Jianghuai Refine is equipped with a 5-speed automatic manual transmission from Japan's Jatco. During actual test drives, the gear shifting is very smooth. The front styling of the Refine appears full and robust, with the large air intake on the front bumper adding to its appeal. The non-matching color treatment of the exterior body enhances the overall layered appearance. The center console features a novel layout with large, high-quality buttons, significantly elevating the interior's premium feel. The seat design of the Refine is quite satisfactory, offering a spacious overall design. The front row's internal height reaches 1660mm, and the seat cushion length is 520mm, with moderate elasticity and adequate support for the legs and neck.
3
1
Share

How to Press the Clutch Steadily?

Clutch pressing method: First, press the clutch pedal down with the ball of your foot. When it reaches the semi-engaged state, keep your heel on the ground. If the vehicle speed increases, press the clutch slightly; if the speed decreases, lift the clutch slightly. At the semi-engaged state, keep your heel on the ground, stabilize, and then use the brake to control the speed by lifting or pressing. Avoid pressing the clutch unless the vehicle is at low speed. The clutch is located in the flywheel housing between the engine and the transmission. The clutch assembly is fixed to the rear plane of the flywheel with screws, and the output shaft of the clutch is the input shaft of the transmission. During driving, the driver can press or release the clutch pedal as needed to temporarily disconnect or gradually engage the engine and transmission, thereby cutting off or transmitting the engine's power to the transmission.
3
3
Share

How to Replace the Thermostat in a 2014 Toyota Vios?

Steps to replace the thermostat in a 2014 Toyota Vios: 1. Turn off the engine, open the front hood, and disconnect the negative battery cable. 2. Remove the plastic cover outside the timing belt. 3. The location of the generator may affect the thermostat replacement, so it is necessary to remove the generator assembly. 4. Place a water tray under the car, then prepare to remove the water pipe and wait for the coolant to drain completely. 5. Remove the faulty thermostat and install a new one. After installing the new thermostat, apply a layer of sealant to the water pipe area. 6. Reinstall the removed water pipe, generator, and timing belt plastic cover in their original positions, reconnect the negative battery cable, and add new coolant. The dimensions of the 2014 Toyota Vios are 4435mm in length, 1700mm in width, and 1490mm in height, with a wheelbase of 2550mm.
11
1
Share

How to Reset the Maintenance Light on a Sagitar?

Sagitar maintenance light reset method: There are two buttons at the lower left corner of the combination instrument panel. First, press the maintenance button while turning the ignition key to the light-on position. After hearing a beep, release the maintenance button and hold for two seconds without moving the key. Then, press and hold the minute button next to the instrument panel. As long as the minute time does not advance, the maintenance light reset is complete. The Sagitar measures 4544mm in length, 1760mm in width, and 1461mm in height, with a wheelbase of 2578mm. The Sagitar's design abandons the individuality and sportiness of the older models, adopting a distinctive family-style design. The overall appearance is grand and stable, with smooth body lines and relatively fine detailing.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.