How to Connect Bluetooth in Golf 7?

1 Answers
MacBrady
07/24/25 10:17pm
From the panel of the car's multimedia system, locate the Bluetooth function switch and turn on the car's Bluetooth; Activate the Bluetooth function on your phone and set the phone's Bluetooth to 'Visible to All' or make it discoverable or open for detection; Search for Bluetooth devices on your phone, and once found, select it to pair and connect.
Was this review help?
16
4
Share
More Forum Discussions

How to Remove Spray Film from Car Wheel Hubs?

The methods to remove spray film from car wheel hubs are: 1. Use a hair dryer to heat the spray film to soften it and peel it off slowly; 2. For small remaining parts that cannot be peeled off, use gasoline, carburetor cleaner, or tar remover; 3. Use fine sandpaper to gently sand off the residue. Car wheel hubs, also known as rims or steel wheels, are automotive parts that serve as the central mounting point for the axle. They are crucial components connecting the brake drum or brake disc, wheel disc, and axle, supporting the wheel along with the tire and determining the tire specifications. The maintenance methods for wheel hubs include: 1. Avoid using cold water to clean when the hub temperature is high; 2. Clean the hubs frequently in humid environments to prevent salt corrosion on the aluminum surface.
18
3
Share

Where is the cabin air filter located in the Dongfeng Nissan Sylphy?

The cabin air filter in the Dongfeng Nissan Sylphy is located in the glove compartment on the passenger side. The function of the cabin air filter is to prevent dust, pollen, soot, abrasive particles, ozone, odors, nitrogen oxides, sulfur dioxide, carbon dioxide, and benzene from entering the vehicle cabin. The Dongfeng Nissan Sylphy is a compact 4-door 5-seater sedan with the following dimensions: length 4631mm, width 1760mm, height 1503mm, and a wheelbase of 2700mm. It is equipped with a 1.6L naturally aspirated engine and a 5-speed manual transmission, delivering a maximum power of 90 kW and a maximum torque of 155 Nm. The vehicle features front-wheel drive, with a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension.
6
3
Share

Where is the LaCrosse Body Control Module Located?

LaCrosse body control module is located on the left side of the steering column. The body control module is the core component that controls various parts, managing fuel injection and ignition timing based on input from various sensors, while providing optimal control commands to other output devices. The LaCrosse is a mid-size 4-door 5-seater sedan with the following dimensions: length 5026mm, width 1866mm, height 1459mm, wheelbase 2905mm, and a fuel tank capacity of 55 liters. It is equipped with a 1.5T turbocharged engine and a 9-speed automatic transmission, delivering a maximum power of 124 kW and a maximum torque of 250 Nm. The drivetrain configuration is front-engine, front-wheel drive (FF), with a front MacPherson strut independent suspension and a rear multi-link independent suspension.
1
3
Share

How to Match the Headlights of a Passat?

The method to match the headlights of a Passat is as follows: 1. Turn on the ignition switch, connect the ms906S to the vehicle, and ensure normal communication; 2. Use the VIN code intelligent recognition function to quickly enter the vehicle model with one click; 3. Select programming to complete the matching. The Passat is a mid-sized 4-door, 5-seater sedan with body dimensions of 4933mm in length, 1836mm in width, and 1469mm in height, a wheelbase of 2871mm, and a fuel tank capacity of 68.5 liters. The Passat is equipped with a 1.4T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 110 kW and a maximum torque of 250 Nm. It features front-wheel drive, with a front suspension using a MacPherson independent suspension and a rear suspension employing a multi-link independent suspension.
16
4
Share

How to Clean the Throttle Body in a Car?

To clean the throttle body in a car, follow these steps: 1. Turn off the ignition switch and disconnect the negative terminal of the battery; 2. Remove the throttle cable, intake hose, and screws securing the throttle body in sequence; 3. Use a cleaning agent to clean the throttle body, and for areas that are hard to reach, use a cotton swab to wipe. The throttle body is a controllable valve that regulates the air entering the engine. After entering the intake pipe, the air mixes with gasoline to form a combustible mixture, which then burns to perform work. The effects of a dirty throttle body include: 1. Engine shaking during idle; 2. Insufficient power when driving; 3. Increased fuel consumption; 4. The vehicle is prone to stalling; 5. Emissions fail to meet standards.
20
2
Share

How to remove the rear taillight of Haval H6?

Haval H6 rear taillight removal method is: 1. Open the trunk lid to locate the rear taillight; 2. Lift up the cover; 3. Use a wrench to remove the screws; 4. Gently pry off the headlight assembly. The Haval H6 is a compact 5-door, 5-seat SUV with body dimensions of: length 4653mm, width 1886mm, height 1730mm, and a wheelbase of 2738mm. The Haval H6 is equipped with a 2.0T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 155 kW and a maximum torque of 325 Nm. It features front-wheel drive, with a front suspension using MacPherson independent suspension and a rear suspension employing multi-link independent suspension.
13
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.