How to connect Bluetooth in BYD F3?

Can a car continue to be driven if the frame is damaged?

A car with a damaged frame can continue to be driven mainly depending on the extent of collision damage and the quality of post-repair maintenance. If the damage is limited to the front of the frame and does not affect the shock absorber area, the car can be repaired and driven afterward. However, if the damage is severe and the repair quality is poor, it is not recommended to continue driving. The frame serves as the car's foundation, typically consisting of two longitudinal beams and several crossbeams, supported by the suspension system, front axle, and rear axle on the wheels. Under normal circumstances, a car's frame does not deform. Deformation usually occurs only in vehicles involved in accidents. The frame is designed with sufficient strength and stiffness to bear the car's load and impacts transmitted from the wheels. The car's frame is supported on the wheels by the suspension system's front and rear axles, carrying almost all the weight of the vehicle and its cargo. The frame is primarily composed of longitudinal and crossbeams, specifically categorized into side-beam and longitudinal-beam types. The material used for the frame is mostly high-strength steel plates, connected via riveting to form a rigid structure, ensuring it has enough strength and stiffness to withstand the car's load and impacts from the wheels.

20

3

Share

What is the maintenance interval for the Audi A4?

According to Audi's official maintenance manual, the recommended maintenance interval is every 10,000 kilometers or 1 year. This means it's perfectly acceptable to follow this schedule for servicing at authorized 4S dealerships, which has been confirmed by multiple dealerships. Audi Maintenance Precautions: 1. Avoid prolonged engine operation in unventilated garages: Engine exhaust contains carbon monoxide, an invisible and odorless toxic gas. Prolonged exposure to low concentrations of carbon monoxide can cause headaches, rapid breathing, nausea, vomiting, weakness, dizziness, mental confusion, and even brain damage. If starting the engine in a garage, always keep the garage door open or use ventilation equipment to expel exhaust gases. Even when working outdoors, avoid staying near operating engine exhaust pipes for extended periods. 2. Never siphon fuel with your mouth: Gasoline is not only flammable and explosive but also toxic. Leaded gasoline can damage the nervous system, digestive tract, and kidneys. Additionally, gasoline contains high concentrations of sulfides, and hydrogen sulfide is poisonous. Ingesting gasoline can lead to poisoning or death. If accidentally ingested, induce vomiting immediately and seek medical attention. 3. Avoid contact with carburetor cleaner: Most carburetor cleaners contain methyl chloride, aromatic compounds, and ethanol, all of which are toxic. Inhaling these substances or getting them on your skin or eyes can be hazardous. 4. Prevent mechanical injuries: Vehicle maintenance involves various aspects, and clear warning signs should be set up during operations to prevent accidental injuries from others' mistakes. When starting the car, check the transmission's gear position to prevent accidental movement that could harm someone. When working under the hood, ensure others are out of the driver's seat to avoid injury from sudden engine movement or control activation. For undercarriage work, use clear markers and secure the vehicle with wheel chocks. When using a jack, ensure it's placed on stable ground. Always use proper jack stands—never use fragile objects like bricks. When installing assemblies, never test screw or lock holes with your fingers to avoid injury. Never work under the vehicle during engine tests. 5. Prevent fires: During maintenance, flammable and explosive materials like fuels and cleaners are often used. Always have fire extinguishers ready as a precaution. Avoid smoking near the fuel tank or battery, as escaping fuel vapors and hydrogen from the battery are highly flammable.

19

5

Share

What is the fuel tank capacity of the Nissan Sylphy?

There are 11 models of the Nissan Sylphy currently on sale, with fuel tank capacities ranging from 41L to 50L, including: The 1.6L XL CVT Enjoy Edition, 1.6L XL CVT Intelligent Edition, 1.6L XE CVT Comfort Edition, and 1.6L TOP CVT Luxury Edition have a fuel tank capacity of 47 liters; The 1.6L XE Manual Comfort Edition, 1.6L XE CVT Comfort Edition, and 1.6L XL CVT Premium Edition have a fuel tank capacity of 50 liters; The e-POWER Full Electric Pro, e-POWER Ultra Smart Connect PLUS, e-POWER Ultra Smart Drive MAX, and e-POWER Ultra Luxury Ultra have a fuel tank capacity of 41 liters; This data is officially released by the manufacturer. Owners of related Nissan Sylphy models can also check the fuel tank capacity on the vehicle's configuration sheet. The Nissan Sylphy uses 92-octane fuel. The e-POWER Full Electric Pro, e-POWER Ultra Smart Connect PLUS, e-POWER Ultra Smart Drive MAX, and e-POWER Ultra Luxury Ultra have a fuel consumption of 3.9L per 100 kilometers; The 1.6L XL CVT Enjoy Edition, 1.6L XL CVT Intelligent Edition, 1.6L XE CVT Comfort Edition, and 1.6L TOP CVT Luxury Edition have a fuel consumption of 4.9L to 5.2L per 100 kilometers; The 1.6L XE Manual Comfort Edition, 1.6L XE CVT Comfort Edition, and 1.6L XL CVT Premium Edition have a fuel consumption of 5.2L to 6.1L per 100 kilometers. During daily driving, it is necessary to pay attention to the remaining fuel level in the tank at all times. Generally, the fuel level is observed through the fuel gauge inside the car. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments. When there are only 2 segments left on the fuel gauge, it is time to refuel to avoid running out of fuel midway. During actual refueling, the amount of fuel added may exceed the marked capacity. This is because the fuel tank capacity marked by the manufacturer is from the bottom of the tank to the safe limit, and there is still some space from the safe limit to the tank opening. This space is reserved to allow for fuel expansion when the temperature rises, preventing overflow from the tank. If fuel is added up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.

13

5

Share

Why Doesn't the Dash Cam Record Continuously?

The dash cam may not record continuously due to factors such as the loop recording function being turned off, issues with the dash cam's memory card, the video lock function being enabled, or insufficient storage space. The main functions of a dash cam are: Protecting the legal rights of drivers. In case of collisions with pedestrians crossing the road or owners of bicycles and motorcycles, drivers may face extortion. A dash cam can provide effective evidence for the driver. Reviewing the recorded footage makes accident liability clear at a glance, allowing traffic police to handle accidents quickly and accurately. This enables rapid clearance of the scene to restore traffic flow while preserving crucial evidence from the incident, contributing to a safe and smooth traffic environment. If every vehicle is equipped with a dash cam, drivers will be less likely to violate traffic rules, significantly reducing the occurrence of accidents. Vehicles involved in accidents will be captured by other vehicles' dash cams, greatly decreasing hit-and-run cases. When courts adjudicate road traffic accident cases, sentencing and compensation will be more accurate and evidence-based. It also provides evidence for insurance claims. In cases of professional fraudsters staging accidents, the dash cam can provide decisive evidence for solving the case. Dash cam setup methods: Recording sound: The dash cam's sound recording setting allows it to record sounds inside the vehicle while filming. Loop recording: Most dash cams offer three time options—1 minute, 2 minutes, and 3 minutes—to segment and store videos in clips of different durations. Motion detection: With the dash cam's motion detection setting, it automatically records when movement is detected, usually with a 2 to 5-second delay. It is not recommended to enable this while driving due to potential issues with sensitivity and algorithms, which may cause significant frame loss. G-sensor: The dash cam typically has four options—high, medium, low, and off. It is generally set to medium or high to avoid detecting sudden braking or can be turned off, with manual saving triggered upon collision.

1

4

Share

How Many Kilowatt-Hours Does a Car Battery Have?

Car batteries are typically 12 volts and 60 ampere-hours. The calculation method for electricity consumption per charge is: 12 volts × 60 ampere-hours = 720 watt-hours. Considering the charging efficiency, multiply by a factor of 1.1: 720 × 1.1 = 792 watt-hours = 0.792 kilowatt-hours. When a passenger car's battery is parked normally, the voltage is generally above 13.4V (in a state where it can start smoothly). As the parking time increases, the voltage will decrease. The reasons are: A car battery loses about 1% of its charge daily. If it remains connected to the car without being removed, the car uses a minimum current (commonly known as "sleep" current) of about 80mA to maintain it. If there is an anti-theft alarm, it will also consume some power. Generally, about 2~3% of the battery's charge is consumed daily. When the battery charge is below half, i.e., the voltage is below 13.4V, the battery fault light will come on, and the car will be difficult to start. In this case, the battery should be fully charged once every two weeks. If the battery voltage is 10% lower than the rated voltage, i.e., below 10.8V, the battery is at risk of being undercharged. In this case, it should be fully charged once a month. Car battery charging method: Turn off the engine and remove the battery from the car. Adjust the battery's liquid level to the specified height using distilled water or a special battery replenishing liquid. Connect the battery to be charged according to the rated voltage and current specified by the charging equipment. Remember that the total voltage of the battery must not exceed the rated voltage of the charging equipment. Choose the charging current size for constant current charging based on the battery's capacity. Because the battery has been used, it should be charged slowly in two stages: the charging current in stage one is one-tenth of the battery's rated capacity, and the charging current in stage two is one-twentieth of the battery's rated capacity. Plug in the charger, attach the red clamp of the charger to the battery's positive terminal marked with a plus sign, and the black clamp to the battery's negative terminal marked with a minus sign. Turn on the switch to start charging. Generally, the charging time should not exceed 12 hours. After charging, check whether the density of the battery's electrolyte meets the requirements. If it does not, you can first pour out a small amount of the original electrolyte. If the density is too low, add a concentrated electrolyte with a higher relative density; if the density is too high, add distilled water to dilute it until the liquid level reaches the specified height.

9

4

Share

How to Prevent Stalling During Hill Start in Driving Test?

Edge slope must be given throttle. During training, you may often encounter situations where you can climb without turning off the engine or giving throttle, but you cannot take such risks during the test. The reason why you can start smoothly without throttle is that the "idle speed" of this training car is higher than other cars. Idle speed is the minimum speed at which the engine maintains operation without doing work. When you are on a slope, if you don't give throttle, it is very likely that the vehicle will stall due to insufficient idle speed and fail to start the vehicle on the slope. Once the vehicle rolls back, the engine becomes even harder to stop. When there is a rollback, you can only step on the brake and clutch first, stop, and then start again. Control the clutch. Don't lift the clutch too high. If you don't release the brake, it will stall. Just lift the front of the car. You don't have to reach the "perfect contact point." Because when throttle is given, even if the contact point is not fully lifted, the car won't slip when the brake is released, and the car will remain stationary. In this case, don't panic when looking at the car, thinking the clutch isn't lifted enough. In fact, at this time, since there is no rollback, it means the clutch is already semi-engaged, and you can slightly lift the clutch with throttle. Of course, if you can control the clutch contact point well (the front of the car is obviously lifted, and the body does not shake before the engine shuts off), it's best to add throttle, release the handbrake, and move the car at this time. Considering that the foot brake and handbrake serve the same purpose, during practice, if you stop on a slope without a handbrake, when starting again, the coordination between the foot brake and clutch is the same—keep the right foot stepping on the brake, lift the left foot to the clutch contact point, then keep the left foot still, and immediately step on the throttle with the right foot when leaving the foot brake. However, this can be used in practice to train the coordination of throttle and clutch. During the test, no matter the situation, as long as you stop on a slope, you must pull the handbrake and shift to neutral. Throttle and clutch coordination refers to the operation sequence: throttle first, then clutch. The throttle has no travel, while the clutch has travel. The so-called travel refers to the process from the implementation of the action to the effect of the action. When braking, brake first, then release. During the test, step on the clutch first and coast in neutral. After stepping on the brake to a certain extent, the body will shake, which means that due to the resistance of the brake, the engine has started working with an immovable gear. At this time, you need to step on the clutch to cut off the engine's power transmission to avoid stalling.

3

1

Share

How to connect Bluetooth in BYD F3?

Can a car continue to be driven if the frame is damaged?

What is the maintenance interval for the Audi A4?

What is the fuel tank capacity of the Nissan Sylphy?

Why Doesn't the Dash Cam Record Continuously?

How Many Kilowatt-Hours Does a Car Battery Have?

How to Prevent Stalling During Hill Start in Driving Test?

Why is there no Yun B license plate?

What is the difference between 91V and 91W tires?

Is it suitable to take the Subject 2 driving test on a rainy day?

Is It Normal for the Exhaust Pipe to Have Water in Winter?