How to Connect Bluetooth in a Maxus Screenless Car?

What is the method for replacing the rear brake pads of the Envision?

The method for replacing the rear brake pads of the Envision is as follows: 1. Open the engine compartment and check the brake fluid level to prevent overflow during replacement; 2. Remove the wheel where the brake is located; 3. Remove the bolts of the brake caliper and take out the brake pads; 4. Install the new brake pads, tighten the guide bolts, and the replacement is complete. Taking the 2020 Envision as an example, it is a mid-size SUV with body dimensions of length 4694mm, width 1839mm, height 1686mm, a wheelbase of 2750mm, and a fuel tank capacity of 66L. The 2020 Envision is equipped with a 1.5T inline 4-cylinder turbocharged engine, delivering a maximum horsepower of 169PS, a maximum power of 124kW, and a maximum torque of 250Nm.

5

0

Share

How Many Chances Are There for the Safe and Civilized Driving Knowledge Test?

Both the road driving test and the safe and civilized driving knowledge test in Subject 3 are scored out of 100, with a passing score of 90. Subject 3 Test Items: Subject 3, which includes the road driving skills test and the safe and civilized driving knowledge test, is part of the motor vehicle driver's license assessment. It evaluates the road driving skills and safe and civilized driving knowledge of motor vehicle drivers. The content of the road driving skills test varies depending on the type of vehicle being licensed. Difficulties in the Subject 3 Test: Mismatch between speed and gear: Errors such as high gear with low speed or low gear with high speed need to be avoided during the test. Deviation in straight-line driving: Many trainees intentionally slow down the vehicle due to concerns about not driving in a straight line, which is not advisable.

7

5

Share

What is the method for applying roof film?

The method for applying roof film is: 1. Clean the car body and keep it dry, then remove the roof trim strips; 2. Determine the area to be covered; 3. Apply while smoothing with tools and removing the backing paper simultaneously; 4. Peel off both the transparent transfer film and adhesive paper completely; 5. After application, repeatedly press and smooth before removing the transparent transfer film; 6. Use a utility knife to make a cut at doors and seams for inward wrapping. The purposes of car film are: 1. Reduce sunlight exposure and ensure safety; 2. Block UV rays, prevent skin damage, and reduce interior aging; 3. Protect privacy and maintain safe driving performance; 4. Compensate for air conditioning cooling capacity loss, lower cabin temperature, and reduce AC energy consumption; 5. Prevent secondary injuries from accidental glass breakage to passengers.

16

4

Share

Should You Release the Accelerator When Upshifting with Paddle Shifters?

When upshifting with paddle shifters, you should release the accelerator. The operating steps for paddle shifters are as follows: 1. Fully depress the car's brake pedal; 2. Start the car and let it idle; 3. Place the automatic transmission lever in the D position; 4. Use the paddle shifters on the steering wheel to shift up or down. The paddle shifters are located on the left and right sides of the steering wheel arc. Their function is to allow the driver to shift gears without using the clutch pedal, keeping both hands on the steering wheel. The features include convenient operation, high efficiency, and improved driver control. There are two types of paddle shifters: 1. Fixed type: During steering, the steering wheel rotates while the paddle shifters remain stationary; 2. Follow-up type: During steering, the paddle shifters rotate along with the steering wheel.

8

2

Share

What Causes Oil on the Ground When Parking?

The reasons for oil on the ground when parking are: 1. Oil seal aging and deformation, spring detachment, or incorrect oil seal installation direction; 2. Pipeline damage; 3. Loose tank cover screws; 4. Damage to the tank joint surface; 5. Excessive axial end clearance; 6. Wear of oil seals or flanges, with gear oil exceeding the specified standard; 7. Improper use of lubricating oil. Methods to address oil on the ground when parking: 1. Wipe the oil stains with a cloth or paper towel and inspect the leaking part; 2. Tighten the nuts at the connection; 3. Replace the gasket and replenish the transmission oil; 4. Weld and repair the worn parts or replace components.

9

2

Share

What is the difference between China III and China IV motorcycle emission standards?

China III and China IV have different emission standards. The following is an introduction to China III and China IV emission standards: Introduction to China III emission standard: The China III standard refers to the third stage of China's vehicle emission standards. The China III emission standard is equivalent to the Euro III emission standard, with similar levels of tailpipe pollutant emissions. The difference is that new vehicles must be equipped with an OBD (On-Board Diagnostics) system. Introduction to China IV emission standard: Motorcycles and mopeds are classified based on maximum design speed and displacement. Motorcycles refer to those powered by spark-ignition engines with a maximum design speed exceeding 50km/h or displacement exceeding 50mL, as well as three-wheeled motorcycles powered by compression-ignition (diesel) engines with a maximum design speed exceeding 50km/h or displacement exceeding 50mL.

1

Share

How to Connect Bluetooth in a Maxus Screenless Car?

What is the method for replacing the rear brake pads of the Envision?

How Many Chances Are There for the Safe and Civilized Driving Knowledge Test?

What is the method for applying roof film?

Should You Release the Accelerator When Upshifting with Paddle Shifters?

What Causes Oil on the Ground When Parking?

What is the difference between China III and China IV motorcycle emission standards?

One License Plate or Two for Motorcycles?

How to Reset the Buick Tire Pressure Light?

Is a DCT two-wheel drive an automatic transmission?

Is a Temporary Residence Permit Required When Buying a Used Car in Another City?