How to Connect a Phone to Play Music in BYD F3?

Can You Still Drive with a Slightly Bulging Tire?

Tires with even minor bulges should not be driven on. Regardless of the size of the bulge, the tire must be promptly replaced or repaired and should not continue to be used. If the bulge is relatively small, it can be repaired using a hot patch method. Hot patching, also known as vulcanization repair, involves using high-temperature vulcanization to fuse raw rubber into the tire's damaged area, which then cools and solidifies to seal the wound. Causes of tire bulging: If a tire has a bulge, especially when driving continuously in high temperatures, it is highly prone to a blowout, severely compromising driving safety. Aside from installation and manufacturing defects, most tire bulges occur due to accidental impacts with obstacles during use, causing localized breaks in the tire wall's cord layers. Measures to prevent tire bulging: When installing tires, visit a professional tire shop that uses specialized tire installation equipment and follows proper procedures. Try to avoid driving for extended periods on poor road conditions. If unavoidable, maintain the slowest possible speed.

5

4

Share

What Does a Two-Way Traffic Lane Mean?

Roads are generally composed of two opposing traffic lanes, known as two-way lanes. (A traffic lane refers to the ribbon-like part of a highway that allows various vehicles to travel longitudinally, safely, and comfortably.) Common configurations include two-way four-lane, two-way six-lane, and two-way eight-lane roads. Two-way lanes in China: In China, secondary and tertiary highways mostly adopt two-lane configurations. For secondary highways in flat and slightly hilly areas with heavy mixed traffic, it may be difficult to separate slow lanes. In such cases, lanes can be marked for fast and slow traffic, but they are still considered two-lane roads. Quaternary highways are preferably designed as two-lane roads, but single-lane configurations can be used for sections with low traffic volume. Precautions for driving on two-way lanes: When the road is narrow or there are obstacles on the roadside, driving becomes more challenging. In such situations, it is important to remain calm, control your speed, and avoid driving too fast. Always stay observant. If there is an obstacle ahead and oncoming traffic in the opposite lane, large trucks should not only slow down but may also temporarily stop to let passenger cars pass first. Avoid competing for the lane to ensure safety.

20

0

Share

Is the minibus free on highways during National Day?

According to the "Implementation Plan", during the toll-free period, toll roads will exempt tolls for passenger vehicles with 7 seats or fewer (including 7 seats), including motorcycles allowed to drive on ordinary toll roads. Pickup trucks, large buses, trucks, and private vehicles with more than 7 seats are not included in the toll-free range. Vehicles exempt from tolls on highways: National military and armed police vehicles; green channel trucks that meet the regulations; 120 ambulances on duty, some vehicles of the National Security, and vehicles with special or police passes. Requirements for driving on highways: Drivers must have at least one year of driving experience. New drivers within one year must be accompanied by a driver who has held a corresponding or higher-level driving license for more than 3 years when driving on highways. For drivers of small automatic transmission passenger cars specially designed for the disabled, they can be accompanied by a driver who holds a driving license for small automatic transmission passenger cars or above.

1

Share

Is vehicle inspection available during holidays?

Vehicle inspection services are available during holidays, as the Vehicle Management Office operates 365 days a year without closure. On Saturdays, Sundays, and other holidays, basic services such as temporary license plates and license replacement can be processed, but vehicle registration services are not available. Specific working hours for vehicle inspection: Generally, it is from 8:00 AM to 12:00 PM and from 1:00 PM to 5:00 PM on weekdays (Monday to Friday). In summer, the afternoon hours are from 1:00 PM to 6:00 PM. On weekends and holidays, the Vehicle Management Office only handles basic services. Documents required for vehicle inspection: Fill out the "Motor Vehicle Inspection Record Form." For private vehicles, in addition to the owner's signature, a copy of the owner's ID card must be attached. For company vehicles, a copy of the enterprise code certificate must be provided along with a completed "Power of Attorney" form stamped with the company seal. The vehicle identification number (VIN) rubbing should be pasted in the corresponding section of the "Motor Vehicle Inspection Record Form."

6

2

Share

What Causes Body Shaking at 120 km/h?

When driving at 120 km/h, the phenomenon of body shaking occurs due to poor dynamic balance of the two front wheels. If there is a pressure difference between the tires, the wheels' ability to absorb vibrations varies, which can also cause the vehicle to shake. Additionally, deformation or bending of the drive shaft and excessive wear of the drive ball joints can lead to vehicle shaking. Meaning of Dynamic Balance: For wheel alignment, it is mainly applied when the vehicle tires exhibit deviation. In terms of the tires themselves, there is no inherent issue. Wheel Alignment Adjustment: It includes four operational details: kingpin inclination angle, front wheel camber angle, front wheel toe-in, and kingpin rear angle. Simply put, wheel alignment is based on the situation where the tires experience edge wear during driving. The tires themselves do not have significant wear, so performing a wheel alignment ensures stable straight-line driving and easy steering. It can reduce wear on steering components and front wheels during driving.

3

4

Share

How many seconds count as stopping in Subject 2?

If the vehicle pauses for more than 2 seconds during the test, it will be judged as an intermediate stop. It is said that the computer's standard for determining an intermediate stop is that the wheels move no more than 10 centimeters within 3 seconds, which will be judged as an intermediate stop. The test computer uses sensors and computer analysis to determine that if the wheels move no more than ten centimeters within 3 seconds, it will be judged as an intermediate stop. Below is relevant information about Subject 2: Teaching objectives: Master the basic driving operation essentials and possess the basic ability to control the vehicle; proficiently master the basic methods of driving in the field and on the road, possess the ability to reasonably use vehicle control components and correctly control the spatial position of the vehicle, and accurately control the vehicle's driving position, speed, and route. Project scope: The test items for small cars C1 and C2 include five compulsory items: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving on a curve (commonly known as an S-bend) (some regions also have a sixth item, high-speed card collection).

9

2

Share

How to Connect a Phone to Play Music in BYD F3?

Can You Still Drive with a Slightly Bulging Tire?

What Does a Two-Way Traffic Lane Mean?

Is the minibus free on highways during National Day?

Is vehicle inspection available during holidays?

What Causes Body Shaking at 120 km/h?

How many seconds count as stopping in Subject 2?

Can I replace just one front tire if it's damaged?

What causes hesitation and lack of power during driving?

What are the body dimensions of the Volvo XC60?

What are the risks of not transferring ownership when buying a used car?