How to Connect a Phone to an Old Jetta for Listening to Music?

1 Answers
StChristian
07/29/25 9:28pm
You can purchase a car MP3 player, then connect the car MP3 player to the radio wirelessly, and connect your phone to the car MP3 player via AUX or Bluetooth. You can also use an audio cable to connect to the car stereo, which allows you to play music via Bluetooth from your phone as well.
Was this review help?
11
1
Share
More Forum Discussions

Can the Start-Stop Function of the New Santana Be Permanently Disabled?

The start-stop function of the new Santana can be permanently disabled. Below is a detailed introduction about the Santana car: 1. Overview: The Volkswagen Santana (SANTANA) is a sedan brand produced by Volkswagen in California, USA, and the standard Santana sedan can be seen nationwide. Currently, there are models such as the Santana, Santana 2000, and Santana 3000. 2. Other Specifications: The wheelbase is 2548mm. The vehicle dimensions are 4546mm*1710mm*1427mm. The trunk capacity is 442L. The fuel consumption is 8.5L/100km. The engine type is a 1.8L 95HP L4. The standard seating capacity is 5. The top speed is 165km/h. The acceleration time is 12.9 seconds. The drive type is front-wheel drive.
8
3
Share

What does the flashing red key indicator light on the Nissan Sylphy mean?

The red key symbol displayed on the Nissan Sylphy's dashboard alerts the driver that the remote key's battery is low and needs to be replaced. The steps to replace the key's battery are as follows: 1. Press the mechanical key unlock button on the remote. 2. Remove the mechanical key from the remote. 3. Use a tool to pry open the seam around the edge of the remote. 4. Separate the upper and lower shells of the remote. 5. Replace the internal button battery, ensuring the battery model is the same. 6. Reassemble the shells in the reverse order. 7. Reinsert the mechanical key.
19
1
Share

Why does the tachometer not move when stepping on the accelerator?

The reasons why the tachometer does not move when stepping on the accelerator include a broken tachometer or foreign objects stuck inside preventing movement. Below is expanded information on the functions of the tachometer: 1. Observing whether the car is started: When the car is not running, it will be in an idle state. At this time, the tachometer needle does not point at 0, but at a position above 700 RPM. Therefore, at any time, if you are unsure whether the vehicle has started, you only need to check the tachometer. 2. Determining the shift timing: Generally, gear shifting is based on the engine sound, but with the increasing sound insulation of vehicles, the engine sound is almost inaudible. The most accurate method to determine is based on the engine RPM.
18
3
Share

Is it normal for an Auman truck's water temperature to reach 100 degrees?

If it consistently remains at 100 degrees, it is not normal. The normal water temperature should be between 80-90 degrees. Here is some knowledge about car water temperature: 1. Normal conditions: Generally, the normal operating temperature for small cars is between 80°C and 105°C (when antifreeze is added), but the normal water temperature usually stays around 90 degrees. Most ordinary cars should not exceed 100 degrees for extended periods, with 105 degrees being the limit temperature. 2. Solutions for high temperature: Try using a higher concentration of coolant, check if the pipes are unobstructed, and inspect the thermostat and dashboard sensor.
19
0
Share

What should be considered when purchasing wheel rims?

Here are the considerations when buying wheel rims: 1. Do not blindly increase the rim size: Some people enlarge the rims to improve car performance. With the tire's outer diameter remaining unchanged, larger rims must be matched with wider and flatter tires. However, the flatter the tire, the thinner its thickness, resulting in poorer shock absorption performance and a significant sacrifice in comfort. Additionally, encountering small obstacles like stones can easily damage the tires. Therefore, the cost of blindly increasing rim size cannot be ignored. Generally, increasing the rim size by one or two sizes based on the original wheel is most appropriate. 2. PCD (Pitch Circle Diameter): This means you cannot freely choose your favorite rim design; you must also consider whether the PCD is suitable, following the technician's advice. 3. Design: Rims with complex and dense structures do look stylish and high-end, but they are often refused service or charged extra during car washes due to the difficulty in cleaning them. Simple rims, on the other hand, appear more dynamic and neat. Of course, if you don't mind the hassle, it's not a problem. Nowadays, the popular aluminum alloy rims, compared to the old cast iron rims, have significantly improved resistance to deformation, greatly reduced weight, minimized power loss, enhanced speed, better fuel efficiency, and superior heat dissipation, making them a favorite among car owners.
17
1
Share

What are the regulations for applying for and using temporary vehicle license plates?

Temporary license plates can be processed by the 4S store before the vehicle is picked up, or the owner can apply at the local vehicle management office by submitting the owner's ID card, car purchase invoice, vehicle certificate, and compulsory insurance policy, and then filling out the temporary license plate application form. Precautions for using temporary license plates: In case of an accident during the temporary license period, the insurance company will provide normal compensation because the temporary license is linked to compulsory insurance. The owner only needs to confirm the effective time of commercial insurance. If an accident occurs before the commercial insurance takes effect, the insurance company will only compensate for the compulsory insurance part. Temporary license plates must be placed correctly: Two temporary license plates should be affixed simultaneously. One should be placed on the upper right corner of the front windshield inside the vehicle, in a position that does not obstruct the driver's view, and should not be covered by the compulsory insurance label. The other should be placed on the upper left corner of the rear windshield inside the vehicle. For other types of vehicles, due to installation constraints, only one temporary license plate is required, but it should be placed on the lower left or lower right corner of the front windshield inside the vehicle, in a position that does not obstruct the driver's view, to ensure driving safety. Scope of use for temporary license plates: Local temporary license plates can only be used within the administrative jurisdiction, while temporary license plates for other regions are used for vehicles traveling across cities. Classification: Temporary license plates for administrative jurisdictions, temporary license plates for cross-administrative jurisdictions, temporary license plates for testing purposes, and temporary license plates for special types of vehicles.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.