How to Connect a Dash Cam to the Central Control Screen?
1 Answers
To connect a dash cam to the car's central control display, you need to remove the central control screen and connect the dash cam's interface to the AV1 port of the navigation module on the central control display. Then, access the dash cam's video feed through the navigation's AV interface. After this connection, the dash cam will only display when the navigation function of the central control screen is activated. Additional information is as follows: 1. Classification: Dash cams are mainly divided into two categories: portable dash cams and aftermarket in-dash DVD integrated dash cams. Portable dash cams can be further divided into rearview mirror dash cams and data dash cams. These types of dash cams are characterized by good concealment, easy installation, detachability, low cost, and simple usage. On the other hand, aftermarket in-dash DVD integrated dash cams are usually vehicle-specific and can be divided into pre-installed and aftermarket types. Installing these dash cams is more expensive and challenging, but they maintain the aesthetics of the car's interior. Additionally, some luxury models come with pre-installed dash cams from the factory. 2. Memory: Since the video files recorded by dash cams are very large, with high-definition videos consuming up to nearly 100MB per minute, there are stringent requirements for the write speed of the memory card. Using a low-speed memory card can cause the dash cam to overheat and potentially crash.