···
Log in / Register

How to conduct annual review after upgrading from C1 to D license?

4 Answers
Dean
07/30/25 1:07am
The upgraded C1D driver's license is equivalent to a newly obtained C1 license and does not require annual review. It should be renewed every 6 years. If the demerit points are within 12 points, the driver just needs to pay the traffic violation fines, and the points will be automatically cleared after the scoring cycle. If the demerit points reach or exceed 12 points, the driver must participate in study sessions and pass exams at the vehicle management office before the points can be deducted. If a motor vehicle driver accumulates 12 demerit points within a scoring cycle, the traffic management department of the public security organ shall detain their motor vehicle driver's license. Specific details of upgrading to C1: Just like applying for a C1 license, you first need to submit an application at the local vehicle management office. After the application is approved, you must undergo a medical examination at a hospital. Upon completing the medical examination, bring the medical report, ID card, and application form to the vehicle management office for review. Once approved, you will be scheduled for exams. Exams: The exams include a theoretical test and a field test. The theoretical test covers the same content as Subject 1. Since you already have a C1 license, this test should not be too difficult. The field test includes items such as stake parking, curves, single-plank bridge, and slopes, which are not very challenging. You have two attempts for the field test. If you fail the first time, you can retake it once. If you fail the retake, you can pay to take the test again.
Was this review help?
17
3
Share
DeEmily
08/15/25 6:39am
I just got my C1D driver's license not long ago, and I'm quite curious about the annual review process. After adding the additional license category, the entire driver's license is combined, and the annual review process is handled the same way—no need to deal with it separately. Basically, you need to renew your license at the vehicle management office every 6 years. If you turn 60 during this period, you’ll need an annual medical check-up. Just bring your ID card, the original driver's license, and two small white-background photos. At the medical check-up area in the vehicle management office, they’ll test your vision, color recognition, and other basic checks—it’s pretty straightforward. I’ve noticed that after adding the C1D category, the annual review mainly ensures the driver is physically healthy enough to safely operate all types of vehicles. It’s best to make an appointment a month in advance to avoid long queues. Safety comes first, and regular check-ups are also a way to protect yourself.
Was this review help?
12
2
Share
Expand All
McValeria
10/20/25 5:16am
As a veteran driver with decades of experience, I'm very familiar with the annual inspection process. After upgrading from C1 to D license, the inspection follows unified procedures: just get a physical exam at the local DMV every 6 years before license renewal, but annual checks are required for older drivers. Bring your ID and driver's license - the exam includes vision tests for nearsightedness or color blindness. The whole process is easy and usually takes about half an hour. The benefit of license upgrade is having a combined license, which saves much trouble. Developing good daily habits like avoiding junk food to protect eyesight can reduce risks during inspections. Road safety is paramount - though inspections may seem minor, they actually concern others' lives.
Was this review help?
11
4
Share
Expand All
Maci
12/03/25 5:49am
After obtaining the additional C1D license, I've undergone the annual review process several times. The procedure is straightforward: a medical examination is required every 6 years for license renewal, and annually for those over 60. Simply bring your ID card, driver's license, and photos to the DMV hall, where medical staff will conduct basic checks like vision tests. With the additional license, all permitted vehicle types are listed on one card, making the annual review simple and efficient. Don't forget to check for any traffic violations and address them promptly. The entire process is cost-effective and hassle-free—just plan your visit in advance to avoid peak hours. Safe and healthy driving ensures long-term enjoyment on the road.
Was this review help?
4
0
Share
Expand All
More Forum Discussions

What are the causes of tire fires?

Tire fires are mainly caused by three reasons: excessive speed, overloading, and overheating of tires leading to ignition; bearing fires igniting tires; or brake lock-up causing excessive friction that results in spontaneous combustion. Situations requiring tire replacement: Check the tire wear indicators: Regardless of the tire brand, wear indicator marks are set in the groove areas of the tread. When the tread depth has worn down to the level of the raised indicator rubber, it indicates that the tire needs to be replaced. Bulging phenomenon: If the tread bulges, it means the local rubber has deteriorated or there is uneven pressure. In this case, the tire may explode at any time, making continued driving extremely dangerous, so it should be replaced promptly.
20
5
Share

What is the fuel consumption of CB400?

CB400 has a fuel consumption of 4.5 liters per 100 kilometers. Motorcycle fuel consumption calculation: First, record the odometer reading (L1) when the fuel level is high and the fuel supply is cut off. Then, note the amount of fuel added (YL) during refueling. When the fuel level drops to the high level cutoff again, record the odometer reading (L2). Subtract L1 from L2 and divide by YL to get the distance traveled per liter of fuel in actual driving conditions. Factors affecting motorcycle fuel consumption: Low-quality engine oil consumes more than high-quality oil, and lower viscosity oil consumes more than higher viscosity oil. Engine temperature plays a significant role - low-speed high-load conditions and long-distance travel can cause excessive engine temperature, dramatically increasing oil consumption. Oil consumption also varies based on the engine's internal structure and lubrication method. Engines with more oil passages, higher pressure, and multi-point injection tend to have higher oil consumption.
7
4
Share

What is the typical fuel consumption of a 150cc motorcycle?

On average, a 150cc motorcycle consumes about 3 liters of fuel per 100 kilometers. Below is a partial introduction regarding fuel consumption: Introduction: Generally refers to the gasoline consumption per 100 kilometers, which is a theoretical indicator for vehicles. Methods to reduce fuel consumption: The longer the idling time when parked, the greater the fuel consumption, so try to minimize idling time; avoid rapid acceleration, slamming the throttle, and driving at low RPMs. Factors affecting fuel consumption: Various working conditions such as acceleration, deceleration, braking, and engine idling, as well as load capacity, temperature, and whether the air conditioning is on, all have an impact.
15
1
Share

What does the Cruze P0016 fault code mean?

The Cruze P0016 fault code indicates a malfunction in the crankshaft or camshaft position sensor, which is related to a problem in the post-catalyst fuel system. First, check if the timing belt is broken or has skipped teeth. Then, inspect whether the solenoid valve that adjusts the valve timing is damaged. It is also necessary to check if the oil pressure is normal, and then realign the timing. The crankshaft converts the up-and-down motion of the pistons into rotational motion. The camshaft controls the opening and closing of the valves. The electronic control unit continuously monitors the variable camshaft's timing position and checks the relative position between the camshaft and the crankshaft. If the relative position is misaligned by more than one tooth, the P0016 fault code will appear. Possible causes include a malfunction in the camshaft position sensor or its circuit, a malfunction in the crankshaft position sensor or its circuit, a faulty engine speed sensor, contaminated oil, a stuck variable camshaft solenoid valve, etc. After troubleshooting the vehicle, the fault code must be cleared. When clearing the fault code, it is essential to strictly follow the specific vehicle model's designated fault code clearing procedure. Under no circumstances should the method of disconnecting the battery's negative terminal be used to clear the fault code.
5
0
Share

Is the CVT transmission of the CRV durable?

The CVT transmission of the CRV is durable. CVT transmission offers good comfort: Since there are no manual or automatic transmission gears, but instead two steel belts that drive the system by changing the transmission radius on the conical wheels to alter the gear ratio, there is no traditional gear-shifting process. This naturally eliminates the jerking sensation during gear shifts, achieving linear power output and smoother driving. CVT transmission has excellent performance: Due to the linearization of power output, the engine's working state is more easily matched with the vehicle's load and speed, achieving a balance between fuel consumption, exhaust emissions, and the performance of the engine and transmission. CVT transmission's fuel-saving performance: It can maintain the optimal gear ratio at all times, improving mechanical transmission efficiency and fuel economy. The steel belt transmission components have a simple structure and are highly controllable, with current technology achieving high reliability and service life.
10
1
Share

What to Do When MG GS ABS and Dynamic Stability System Malfunction?

Solutions for MG GS ABS and dynamic stability system malfunctions are introduced as follows: 1. If under warranty, the car can still be driven, but the ABS is ineffective, so drive slowly. 2. If out of warranty, it's best to remove all four tires and clean the ABS thoroughly, as oil contamination may be the cause. Additional information on ABS system response during emergency braking: 1. During emergency braking, the ABS system allows the wheels to maintain a state of rolling and sliding. 2. When the ABS system is active, the ABS indicator on the dashboard will flash. 3. If the ABS system malfunctions, the ABS indicator on the dashboard will remain lit. 4. If the ABS system malfunctions, do not continue driving; resume driving only after repairs. 5. Continuing to drive with a malfunctioning ABS system poses significant safety hazards.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.