How to Conduct Annual Inspection for Vehicles After the Six-Year Exemption Period?

2 Answers
Eleanor
07/25/25 12:18pm
The annual inspection process for vehicles after the six-year exemption period is as follows: 1. The vehicle owner must first ensure there are no traffic violation records for their new vehicle and address any issues promptly. 2. Check the annual inspection date on the vehicle's registration certificate. 3. Bring the original vehicle registration certificate, the owner's original ID card, original compulsory traffic insurance policy, and original vehicle and vessel tax payment receipt to the local traffic police office for processing. 4. The owner should obtain and fill out the exemption application form, then submit the documents and completed form to the staff for review. 5. After approval, present the original registration certificate to the staff to print the new inspection validity date and receive the annual inspection sticker. 6. Take the registration certificate directly to the environmental protection window at the issuing office to obtain the environmental protection label and its copy.
Was this review help?
2
1
Share
OAshley
08/11/25 8:16pm
As a seasoned car owner who has undergone multiple annual inspections, I can tell you that after the initial six-year exemption, vehicles must undergo an on-site inspection every year. Remember to prepare your vehicle license, compulsory insurance policy, and ID card in advance—without these, you won’t even get into the inspection station. Booking via a mobile app is the way to go these days; it saves you from wasting time in long queues. The inspection typically covers lights, brakes, emissions, and more. Once, I failed because I overlooked tire wear, costing me an entire day. My advice: check your lights and brakes beforehand and get them adjusted at a reliable repair shop to pass in one go. Don’t procrastinate—late inspections mean fines and potential points that could affect your insurance. With inspection stations now widely available, pick one near home, bring snacks and drinks to pass the time, and you’ll be done in about an hour. It’s affordable, but safety always comes first!
Was this review help?
12
2
Share
Expand All
More Forum Discussions

How to Thoroughly Clean Carbon Deposits in a Car?

Methods for thoroughly cleaning carbon deposits in a car are as follows: 1. Throttle carbon deposits: The throttle is a device located at the top of the combustion system that controls the intake air volume. Due to its working environment and nature, carbon deposits may form on this component. The most common cleaning method for throttle carbon deposits is to remove the throttle, clean both sides with carburetor cleaner, and then wipe off the decomposed carbon deposits with a cotton cloth. 2. Engine internal carbon deposits: Internal engine carbon deposits mainly appear on the intake and exhaust valves and the pistons in the combustion chamber. The best cleaning method is to have an experienced technician use a machine for cleaning, which is more cost-effective and cleaner than using additives. Regular maintenance, timely replacement of the air filter, and avoiding the use of low-quality gasoline are also recommended.
14
3
Share

How to Use Hill Descent Control?

How to use the Hill Descent Control system: 1. Activate the function. 2. Release the throttle and brake, only steering the wheel is required. Here are the detailed instructions: 1. The Hill Descent Control system, also known as the Downhill Assist Control, is commonly found in off-road SUVs. Its full English name is Hill-Descent-Control, abbreviated as HDC. 2. It is an automatic control system applied during downhill driving. 3. The working principle of the HDC system is to coordinate the brakes and ABS, allowing the vehicle to maintain a low speed and not lose traction when descending steep slopes. 4. Generally, the HDC system sets a speed limit to enable the driver to control the vehicle more comfortably.
20
4
Share

What is the correct method for bleeding car brakes?

Car brakes are a guarantee of driving safety. Once you feel that the brakes are not sensitive or abnormal, they should be dealt with promptly. The correct method for bleeding car brakes is as follows: 1. Remove the dust cap on the bleeder valve of the wheel cylinder, prepare a transparent hose, connect one end to the bleeder valve and the other end to a plastic container. 2. Have one person inside the car press the brake pedal several times, then firmly press the brake pedal until it does not move. 3. Another person outside the car should loosen the bleeder screw on the wheel cylinder, at which point air will be expelled along with the brake fluid. 4. Repeat the above steps until the expelled fluid contains no bubbles, then top up the brake fluid and tighten the bleeder valve.
19
1
Share

How to Reset the Maintenance Light on a Lexus ES200?

The purpose of the maintenance light is to record the usage time of important components. Once a certain mileage is reached, the owner should replace the components in a timely manner. After successful replacement, the car's maintenance light needs to be reset. The specific steps to reset the maintenance light on a Lexus ES200 are as follows: 1. Turn off the ignition switch. 2. Press and hold the trip meter reset button on the car's dashboard. Make sure to keep the button pressed. 3. Turn the ignition switch back on. 4. The odometer will start counting down. When the display shows 0000.0, immediately release the button, indicating a successful reset.
14
2
Share

What to Do When Encountering a Yellow Light While Driving?

Yellow light flashing serves as a warning. At this moment, you can either proceed through the intersection or wait. If the yellow light continues to flash, you may proceed as long as safety is ensured. Below are relevant details: 1. Avoid sudden acceleration. The correct approach is to reduce speed when approaching the intersection; when the yellow light comes on, apply the brakes and stop the vehicle as quickly as possible while ensuring safety. 2. Observe the distance of the vehicle behind before reaching the intersection. When passing through the intersection, be prepared to brake at any moment. Check via the rearview mirror whether the distance between your vehicle and the one behind is safe. If the distance is too close, you can slow down by coasting and lightly tapping the brakes to signal the vehicle behind to reduce speed, thereby avoiding potential danger. 3. Assess braking distance. If the yellow light comes on when you are very close to the stop line and stopping completely is impossible, you should slow down while passing through the intersection and try your best to bring the vehicle to a halt.
10
3
Share

What to Do When Oil Brakes Fail to Hold?

It is recommended to adjust the brakes at a 4S shop if the oil brakes fail to hold. The reasons for oil brakes failing to hold are as follows: 1. Daily operational errors. Most cases are due to the owner's daily operation and maintenance mistakes. Owners must regularly maintain the vehicle's braking system. Once braking issues arise, they should not be underestimated, and a thorough inspection at a 4S shop is necessary. 2. Vehicle overload. In summer, brakes may feel less responsive. The reason is that most cars use air conditioning in summer, and if the car's displacement is not large, it can easily increase the engine's load, affecting brake performance. 3. Brakes not holding firmly. Insufficient engine power. When the air conditioning is on, the brake booster pump cannot function properly during repeated braking by the owner.
19
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.