How to Close Windows After Turning Off the Envision?

1 Answers
OJoshua
07/30/25 6:47am
Here are the methods to close windows after turning off the Envision: 1. If you need to close the windows after turning off the Envision, the car key has a function to close windows after turning off. Press and hold the lock button on the car's remote key for a few seconds, and the car windows will close. 2. If this function is not available, you can activate it at a 4S shop. Below is some related information about the Envision: 1. The Envision has further improved the technology and craftsmanship of the engine fuel system to enhance combustion efficiency. Additionally, the entire three-way catalytic converter assembly has been upgraded, significantly reducing the emissions of particulate matter and gaseous pollutants. 2. The Envision has also made comprehensive innovations to the drivetrain of the National VI version 20T model, equipped with a newly tuned 1.5T SIDI direct-injection turbocharged engine and an upgraded 7-speed DCG dual-clutch transmission, delivering a maximum power of 124kW (169PS)/5600rpm and a maximum torque of 250N·m/1700-4400rpm.
Was this review help?
12
0
Share
More Forum Discussions

Which country does Jaguar belong to now?

Jaguar is a British luxury car manufacturer. The Jaguar logo features a leaping 'Jaguar' sculpture, embodying vigor, bravery, and a perfect blend of form and spirit, with a contemporary feel and visual impact. It not only represents the company's name but also symbolizes the power and speed of forward motion, indicating the car's ability to gallop across the world like a jaguar. Here is an introduction to Jaguar: 1. Jaguar, a renowned British luxury car brand, was founded in 1922 by Sir William Lyons and is now owned by India's Tata Group. 2. In December 2020, Jaguar ranked 165th in the 'World's 500 Most Influential Brands' list compiled by the World Brand Lab.
10
3
Share

How to Deal with Shaking During Cold Start of Outlander?

Reasons for engine shaking during cold start: 1. During cold start, the internal operating resistance of the engine is very high, so the ECU will inject more fuel, which can cause shaking at this time. 2. During cold start, the oxygen sensor has not reached its operating temperature, which can also lead to engine shaking. 3. When the engine has a misfire, it disrupts the smooth operation of the engine, resulting in shaking during cold start. 4. Some engines are particularly prone to carbon buildup. If there is excessive carbon buildup in the engine, shaking may also occur during cold start. Below are the solutions: Many engines now use direct fuel injection technology, and direct injection engines are more prone to carbon buildup. It is recommended that owners of vehicles with direct injection engines clean the carbon buildup every 20,000 kilometers. Many auto repair shops use the method of "hanging an IV bottle" to clean carbon buildup, but this method is completely ineffective and is not recommended.
16
2
Share

Can You Continue Driving When the Anti-Skid Light Is On?

You can continue driving when the anti-skid light is on, but there are certain safety risks. If the anti-skid system indicator light remains on, it means the anti-skid system is either turned off or malfunctioning. In such cases, the car is more prone to skidding on slippery roads, affecting driving stability and safety. The anti-skid light is an indicator for electronic stability systems like ESP. If the light flashes on slippery roads, it indicates the ABS system is active, requiring cautious driving. If the light stays constantly lit, it means the anti-skid system has malfunctioned. Possible causes for the anti-skid light issue include: 1. Accidentally pressing the ESP off button, manually disabling the system; 2. Software issues causing poor signal transmission; 3. Blown fuse or short circuit in wiring; 4. Poor contact or failure at sensor interfaces; 5. ABS pump failure.
3
3
Share

How long does it take to charge the battery after a car battery drains and the engine starts?

After a car battery drains, it takes about 2 to 3 hours to charge the battery for the engine to start. In such cases, it is not recommended to let the engine idle to charge the battery. If the battery is drained, it is advisable to take it to a professional repair shop and use a professional charger to recharge it. The battery is an important component of a car. When the engine is not running, the battery supplies power to all the electrical devices in the car. After the engine is started, the alternator takes over to power all the electrical devices, and the battery is also responsible for starting the engine. The battery is a wearable part that needs to be replaced regularly. As the number of charge and discharge cycles increases, the battery's storage capacity will decrease, which can lead to difficulty in starting the car. Some car owners' poor driving habits can also shorten the battery's lifespan.
12
4
Share

How to Deal with Scratches on a Sedan?

Methods for dealing with scratches on a sedan: 1. Hairline scratches: For fine scratches resembling hair strands, polishing or applying a rubbing compound can easily remove them with gentle wiping. 2. Light scratches: Applying toothpaste to shallow scratches on the car's primer can yield very noticeable results. 3. Moderate to deep scratches: These cannot be repaired by polishing. For small dents not exceeding 5mm, apply filler putty to level the surface, then proceed with touch-up painting. If the metal is exposed, clean the surface of any rust or welding residue, sand it smooth, apply a rust-proof oxidizer neutralizer, spray a primer, and repeat the painting, drying, and sanding process to repair. 4. Deep scratches: Severe deformations require bodywork treatment. Handling such scratches demands relatively high technical skills from the technician.
4
5
Share

How Many Kilometers Should Vehicle Clutch Plates Be Replaced?

Generally speaking, clutch plates can be replaced every 100,000 kilometers. However, due to different driving habits of drivers, the road conditions they encounter daily, and the mileage they travel, the replacement cycle may vary. Some vehicles may not require replacement even after exceeding 100,000 kilometers, while others may need replacement once a year. Therefore, when replacement is needed depends on the degree of wear. Extended Information: The clutch three-piece set: The working process of the clutch can be roughly divided into the separation process, the slip grinding process (semi-engagement process), and the engagement process. Every time the clutch is used, the clutch plates are worn during the slip grinding process. Proper use of the semi-engagement process can ensure smooth vehicle starting and reduce gear shift jerks; abuse of the semi-engagement process will lead to excessive wear of the clutch plates and the need to replace the clutch three-piece set.
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.