How to Close the Windows After Turning Off the Tiggo 5x?

2 Answers
CaydenLynn
07/25/25 2:13pm
The method to close the windows after turning off the Tiggo 5x is: press and hold the lock button on the remote key, and all four windows will automatically rise and close. The Tiggo 5x is a compact 5-door, 5-seater SUV with body dimensions of 4358mm in length, 1830mm in width, and 1670mm in height, with a wheelbase of 2630mm. It is equipped with a 1.5T turbocharged engine and a CVT continuously variable transmission, delivering a maximum power of 115 kW and a maximum torque of 230 Nm. The drive system is front-wheel drive, with a MacPherson independent front suspension and a torsion beam non-independent rear suspension.
Was this review help?
2
1
Share
MacNathan
08/11/25 9:01pm
The Tiggo 5X is quite convenient for closing windows after turning off the engine. My car is this model, and the usual method is to take out the remote key, press and hold the lock button for a few seconds, and the windows will automatically rise and close. This one-touch window control feature is supported in most configurations, making the operation simple and quick. If you forget to close the windows before turning off the engine, this method can prevent rain or dust from entering the car and also serves as an anti-theft measure, especially useful when parking outdoors. If the remote fails to work, it might be due to a dead key battery—just replace the battery; or the vehicle system might need a reset, in which case I would go to the 4S shop for a simple adjustment. Developing a habit of checking before getting out of the car or briefly turning off the engine when starting can make car usage safer and more worry-free. In short, don’t be careless in crowded places, as these small details make driving life smoother.
Was this review help?
10
1
Share
Expand All
More Forum Discussions

Are regular cars generally front-wheel drive or rear-wheel drive?

Regular cars are generally front-wheel drive. The design of front-wheel drive vehicles is less expensive than rear-wheel drive vehicles, both in terms of design and assembly. Front-wheel drive cars do not require a rear drive shaft or rear gearbox, resulting in fewer assembly components. Front-wheel drive vehicles are lighter than rear-wheel drive vehicles, which allows for faster acceleration, shorter braking distances due to easier acceleration, and generally better fuel efficiency compared to rear-wheel drive cars. The downside of front-wheel drive is its handling. Since the car's components are relatively concentrated in the front of the body, the rear becomes very light, making the rear wheels prone to losing traction. Additionally, the front axle bears excessive load during acceleration and braking, causing noticeable lift and affecting comfort.
14
3
Share

What is the difference between V8 and V12?

The differences between V8 and V12: 1. Different engines: The V8 engine has 8 cylinders; the V12 engine has 12 cylinders. 2. Different configuration ranges: The V8 has relatively lower power and is generally configured in ordinary cars; the V12 has much stronger power, and its engines are used in larger vehicles, mostly luxury top-tier cars like the A8, BMW 760, and Mercedes S600, which are all quite heavy. 3. Different cylinder arrangements: The V8 has a V-shaped arrangement with 4 cylinders on each side; the V12 also has a V-shaped arrangement but with 6 cylinders on each side. The more cylinders an engine has, the harder it is to control, the more complex the control system becomes, and the stricter the manufacturing process of the cylinder block must be.
1
0
Share

What engine does the MG GS use?

MG GS is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 220 hp, maximum power of 162 kW, and maximum torque of 350 N·m. The transmission system paired with this engine is a 6-speed dual-clutch transmission. MG GS is a five-door, five-seater compact SUV with body dimensions of 4510 mm in length, 1855 mm in width, and 1699 mm in height, and a wheelbase of 2650 mm. The MG GS features front-engine, four-wheel drive (4WD) with an on-demand four-wheel drive system. The front suspension is a MacPherson independent suspension, and the rear suspension is a multi-link independent suspension.
17
4
Share

What are the differences between Pirelli and Goodyear?

Pirelli and Goodyear both offer excellent sports performance and safety coefficients among major brands. Their differences are as follows: 1. Pirelli: More wear-resistant, stronger grip, better sports performance, but with relatively higher tire noise. 2. Goodyear: Features certain elasticity, deeper tread grooves, thickened contact surface, and offers better quietness and comfort compared to Pirelli. Below is a brief introduction about tires: (1) Tires are one of the important components of a car, directly in contact with the road surface, working together with the car suspension to mitigate impacts during driving, ensuring good ride comfort and smooth driving. (2) They ensure good adhesion between the wheels and the road surface, improving the car's traction, braking, and passability, while bearing the weight of the car.
17
1
Share

What does the Passat Lingyu 16727 fault code mean?

Passat Lingyu 16727 fault code indicates a damaged camshaft position sensor. The impacts and causes of a damaged camshaft position sensor are as follows: Impacts of a damaged camshaft position sensor: Difficulty or inability to start the engine, meaning ignition problems; increased fuel consumption. If the camshaft position sensor fails, the vehicle's computer cannot accurately control fuel injection, leading to higher fuel consumption; reduced power, resulting in a weak engine. Causes of a damaged camshaft position sensor: Failure of the camshaft position sensor component, wiring, or ECM; engine timing issues; malfunction in the camshaft variable timing adjustment section; failure or abnormal gap in the camshaft position sensor target wheel; crankshaft position sensor failure.
20
1
Share

What are the common faults in a car's ignition system?

Common faults in a car's ignition system: 1. Spark plug failure: phenomena such as carbon deposits, oil contamination, and overheating on spark plugs; 2. Delayed ignition: heavy muffler noise, carburetor backfire during rapid acceleration, high engine coolant temperature, and weak vehicle performance; 3. Advanced ignition timing: unstable idle operation, prone to stalling, and severe engine knocking sound during acceleration. The car ignition system includes the power source (battery or generator), ignition coil, distributor, spark plugs, ignition switch, and control circuit. The car ignition system is designed for spark-ignition engines to operate normally by providing high-voltage electricity with sufficient energy to the spark plugs in the correct firing order for each cylinder, enabling the spark plugs to generate strong enough sparks to ignite the combustible air-fuel mixture.
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.