How to Close the Tesla Frunk?

3 Answers
LaStephen
07/29/25 8:52pm
Tesla frunk closing method: Gently lower the frunk lid, press down with both hands on the front side of the frunk lid to engage the frunk lock, then lightly lift the front edge of the frunk lid to ensure it is fully closed. When closing the Tesla frunk, make sure to press down with both hands on the green area shown in the diagram to secure it. Avoid pressing with one hand on the red area in the diagram, as concentrating force in one spot may cause the frunk lid to dent or bend. The Tesla is a mid-size SUV with a 5-door, 5-seat body structure, measuring 4750mm in length, 1921mm in width, and 1624mm in height, with a wheelbase of 2890mm.
Was this review help?
10
3
Share
VonClaire
08/15/25 6:31pm
I remember being a bit flustered the first time I closed the Tesla frunk, but later realized it's actually super simple. Just stand in front of the car, gently press both hands on the center of the lid without applying too much force to avoid damaging the paint, and slowly push it down. When you hear a crisp 'click' sound, it means it's fully locked. I initially thought there was a button, but found out that most models rely on manual operation for reliability, unlike the power-operated trunk. After driving the Model Y for a while, I got into the habit of warming up the lid in cold weather before closing it to prevent sticking. Also, be careful not to operate it on windy days, as strong winds can cause the lid to bounce back. Every time I close it, I walk around the car to confirm there are no gaps, and the central display will also light up a warning if it's not properly shut. After developing this habit, I never worry about forgetting to check, making car washes or retrieving items much smoother.
Was this review help?
9
3
Share
Expand All
OElla
08/15/25 6:32pm
As a new car owner, I had a bit of an embarrassing moment when closing the frunk for the first time—I pressed down too hard, causing a creaking sound, and was afraid I might break it. Later, a friend told me to handle it gently: stand directly in front, place both hands evenly on the center of the lid, and slowly push down until you hear the click. I found it much easier than I imagined; Tesla’s design is really thoughtful. The key is not to rush—if it doesn’t close properly, the dashboard will show a red warning, preventing the danger of it popping open while driving. I even tested it myself, practicing a few times in the parking lot to get familiar with the feel, and now I can do it quickly. Before every trip, I just give it a gentle press—saving time and hassle.
Was this review help?
14
4
Share
Expand All
More Forum Discussions

How to Open the Hood of a Levin?

The method to open the hood of a Levin is: 1. Open the driver's side door; 2. Pull the hood release lever located below the steering wheel on the left side. The Levin is a compact car with body dimensions of: length 4640mm, width 1780mm, height 1455mm, wheelbase of 2700mm, and a fuel tank capacity of 50 liters. The Levin is equipped with a 1.2T turbocharged engine, delivering a maximum power of 85kW at 5200-5600 rpm, and a maximum torque of 185Nm at 1500-4000 rpm, paired with a 10-speed continuously variable transmission.
1
3
Share

What is the difference between having ABS and not having ABS?

The difference between having ABS and not having ABS lies in the braking state: with ABS, the wheels do not lock up during emergency braking; without ABS, the wheels may lock up during emergency braking. ABS stands for Anti-lock Braking System, and its function is to automatically control the braking force during vehicle braking, preventing the wheels from locking up and keeping them in a rolling-sliding state to ensure maximum traction between the wheels and the road. Reasons for the ABS warning light to illuminate include: 1. Wheel speed sensor malfunction; 2. ABS circuit malfunction; 3. ABS pressure control solenoid valve malfunction; 4. ABS computer malfunction.
19
3
Share

What is the minimum ground clearance of the Haval H6?

The minimum ground clearance of the Haval H6 is approximately 180mm. It is a compact SUV under the Great Wall Motors brand, with body dimensions of 4653mm in length, 1886mm in width, and 1730mm in height, and a wheelbase of 2738mm. The tire specification is 225/55R19. The Haval H6 is equipped with a 2.0T turbocharged engine, delivering a maximum power of 155kW at 6000-6300rpm and a maximum torque of 325Nm at 1500-4000rpm. It is paired with a 7-speed dual-clutch transmission.
15
5
Share

Is the Jinjila 300 a domestically produced vehicle?

Jinjila 300 is a domestically produced vehicle. Here are some relevant introductions about the Jinjila 300 being domestically produced: 1. Jinjila 300: The overall appearance belongs to the American Blober style. Therefore, its appearance is very attractive, and the launch of the Jinjila 300 has received a high response in the market, gathering some popularity. 2. Power configuration: Equipped with a V-twin 298cc water-cooled eight-valve engine. Maximum power is 22.5Kw, with belt drive and full LED lighting. 3. Braking system: Front and rear disc brakes + optional ABS.
2
0
Share

Where is the tire pressure reset button on the 2018 Land Cruiser?

The tire pressure reset button on the 2018 Land Cruiser is located next to the steering wheel hood switch. Press and hold it to reset. The 2018 Land Cruiser is a mid-to-large-sized SUV with the following dimensions: length 5095mm, width 1970mm, height 1930mm, wheelbase 2850mm, fuel tank capacity 138L, and tire size 285/60R18. It is equipped with a 4.0L naturally aspirated engine, producing a maximum torque of 376Nm at 3800rpm, paired with a 6-speed automatic transmission.
5
0
Share

Where Should the Car Fire Extinguisher Be Placed?

Car fire extinguishers are generally placed inside the cockpit, commonly under the driver's seat or the front passenger seat. Below is a detailed introduction to car fire extinguishers: Classification of car fire extinguishers: Car fire extinguishers are specifically designed for vehicle fires and include two main types: 1L water-based extinguishers and 1kg dry powder extinguishers. Precautions for using car fire extinguishers: Regularly check the pressure indicator needle on the extinguisher. If the needle is in the green zone, it indicates normal internal working pressure; yellow indicates excessive pressure, and red indicates insufficient pressure. If the extinguisher exceeds its expiration date, it should be discarded and replaced.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.