How to clear the yellow wrench on Zotye T700?
2 Answers
The following introduces how to clear the yellow wrench on Zotye T700: 1. Turn off the engine. 2. Press the two buttons on the vehicle dashboard, start the vehicle after ten seconds, and observe the dashboard. The maintenance wrench will be cleared. 3. After the vehicle has traveled 5,000 kilometers, the maintenance wrench will light up again to remind the vehicle of maintenance. The following is the extended information of Zotye T700: 1. The body length, width, and height are 4748 mm, 1933 mm, and 1697 mm respectively, with a wheelbase of 2850 mm. 2. It is a five-door, five-seat SUV model with a fuel tank capacity of 64 liters, a luggage compartment capacity of 850 liters, and a curb weight of 1787 kg. 3. The engine model is TN4G18T, with a maximum power of 130 kW and a maximum torque of 245 Nm. 4. It can use 92-octane gasoline, adopts a multi-point electronic injection fuel supply method, and is matched with a six-speed wet dual-clutch transmission. 5. The Zotye T700 is front-engine, front-wheel drive.
The yellow wrench light on the Zotye T700 is a vehicle maintenance reminder, indicating that periodic maintenance is required. I used to drive this car, and when the light came on, I would clear it using the steering wheel buttons: first turn the key to the ON position without starting the engine, then press and hold the MODE or settings button on the steering wheel to enter the menu, find the 'Maintenance Reset' option, and confirm—the light will then turn off. However, I must remind you that clearing the light only resets the reminder system. If actual maintenance tasks like oil changes or filter inspections are not performed, the light will come back on after a while and may even affect engine health. I recommend clearing the light after every maintenance session to keep the records accurate. After forming this habit, my car runs much smoother.