How to Clear the Wrench Light on Karry K50?

1 Answers
StBlakely
07/29/25 10:23am
The method to clear the wrench light on Karry K50 is: Press and hold the black knob on the instrument panel, turn the ignition key three times, shift the car to the second gear without starting the engine to clear the light. Taking the 2019 Karry K50 as an example, it belongs to the MPV category with body dimensions of: length 4501mm, width 1760mm, height 1790mm, wheelbase of 2755mm, fuel tank capacity of 45 liters, and curb weight of 1230kg. The 2019 Karry K50 features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.5L naturally aspirated engine producing maximum power of 109 PS (80 kW) and maximum torque of 140 N·m, paired with a 5-speed manual transmission.
Was this review help?
6
2
Share
More Forum Discussions

What is the highway fuel consumption of the BMW X3?

The comprehensive fuel consumption of the BMW X3 is 8.4-8.7L/100km. Currently, there are three models of the BMW X3 available for sale: the xDrive30i Leading M Night Edition Package, the modified xDrive30i Premium M Night Edition Package, both with a comprehensive fuel consumption of 8.7L/100km. The xDrive25i M Sport Package has a comprehensive fuel consumption of 8.4L/100km. The above figures are NEDC comprehensive fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, ranging from 9.5-14.0L/100km. Methods to reduce fuel consumption: Clean engine carbon deposits: Excessive engine carbon deposits are a significant cause, mainly due to the use of unsuitable fuel. It is recommended to add a certain amount of cleaner when refueling. If the effect is not obvious, it indicates a large amount of carbon deposits in the engine. In this case, the car must be taken to a 4S shop for professional cleaning of the engine carbon deposits by technicians. Check the oxygen sensor: As an internal control unit of the car, the oxygen sensor mainly monitors the fuel-air ratio of the engine. Once damaged, it will cause an imbalance in the fuel-air ratio, leading to a sudden increase in fuel consumption. After the oxygen sensor is damaged, the exhaust pipe will emit darker-colored exhaust gas during driving, and the oxygen sensor should be replaced at this time. Regularly replace the three filters: During vehicle use, the oil filter, air filter, and fuel filter must be replaced regularly. If not replaced for a long time, they become dirty and send incorrect information to the engine control unit, resulting in incomplete fuel combustion and increased engine carbon deposits. Check the electronic control unit: Although the engine's electronic control unit is highly reliable, in older vehicles, various faults may inevitably occur.
20
2
Share

What kind of white is the white color of the Mercedes-Benz GLB200?

The Mercedes-Benz GLB200 comes in two white colors: Dimensional White and Polar White. Polar White is likely a standard white, while Dimensional White is probably a metallic paint. Color options for the Mercedes-Benz GLB: The 2020 Mercedes-Benz GLB is available in seven colors: Mountain Gray, Polar White, Star Blue, Cosmos Black, Rose Gold, Dimensional White, and Lava Red. Introduction to car colors: Car color is one of the elements of automotive styling. Car colors include the paint color of the exterior and the colors of various interior materials. When the interior environment of the car and the exterior color harmonize with the surroundings, it can provide a pleasant aesthetic experience for passengers and pedestrians.
9
2
Share

Which type of engine oil is best for an Audi A3?

Audi A3 requires engine oil with the specification 5W-40. The viscosity of engine oil changes with temperature, so special attention should be paid to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity – 5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, resulting in smoother cold starts for the vehicle. The latter number represents the oil's kinematic viscosity at 100°C. A higher value indicates better ability to maintain viscosity at high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the engine oil in an Audi A3 is as follows: Wait for the engine temperature to cool down, allowing the oil to flow back into the oil pan; Use a wrench to loosen the oil drain plug and place an oil pan underneath to catch the old oil until it stops flowing. Then, start the engine and let it run for 30 seconds to allow the oil in the main oil passages to drain out; Use a specialized wrench to remove the oil filter; Apply some oil to the gasket of the new oil filter and tighten it clockwise by hand; Add the new engine oil through the oil filler cap on the engine's valve cover. Generally, fill up to three-quarters of a standard oil container; Start the engine and let it run for 5 minutes, then check for any leaks around the oil drain plug and oil filter. If leaks are found, repairs should be made; After stopping the engine, pull out the oil dipstick to check that the oil level is within the standard range.
10
0
Share

What is the fuel consumption of Nissan cars?

The official comprehensive fuel consumption of Nissan cars as per the Ministry of Industry and Information Technology is 5.6-6.3L/100km, which is quite economical. There are many factors that affect fuel consumption, and it is related to each individual's driving habits. Factors affecting fuel consumption: Generally, factors that affect fuel consumption include the condition of the car, driving habits, road conditions, vehicle weight, and load capacity. Ways to reduce fuel consumption: Car owners should try to maintain regular servicing to keep the engine in good condition and avoid carrying unnecessary items in the car. Use the correct gear while driving, release the accelerator in advance when approaching traffic lights, anticipate road conditions ahead to reduce unnecessary braking and sudden acceleration, and avoid traveling during peak traffic hours. These measures can help reduce fuel consumption.
6
5
Share

Does the BMW X5 hybrid need to be charged?

No additional charging is required. A hybrid vehicle is one that does not need an external charging device to charge the power battery. The motor in the non-plug-in hybrid powertrain can function as a generator. Typical operation: The electric motor drives the vehicle at low speeds, while the engine takes over at medium to high speeds. During engine operation, it can also drive the motor to generate electricity, charging the battery internally. Advantages and disadvantages of the BMW X5 hybrid: It can deliver a maximum power of 230kW and a peak torque of 450Nm, with a single tank of fuel capable of covering nearly 900 kilometers. In terms of storage, the charging cable is placed where the spare tire would normally be, making the trunk appear very tidy at first glance. However, this sacrifices the spare tire and 150L of volume, reducing the standard trunk capacity to only 650L.
19
4
Share

Where is the Civic's intercooler located?

The intercooler is generally located at the lower front of the vehicle. This component is used to cool the air. Hazards of not having an intercooler: Only turbocharged engines have intercoolers. Turbocharged engines compress air, which is equivalent to doing work on the air, thereby increasing the air temperature. If the intake air temperature is too high, it can lead to a decrease in oxygen content in the air, which affects engine performance. Excessively high intake air temperatures can also cause engine knocking. Efficiency of different intercoolers: Some turbocharged vehicles use water-cooled intercoolers, which have higher cooling efficiency; air-cooled intercoolers have very low cooling efficiency during traffic congestion.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.