How to Clear the Maintenance Reminder on Volkswagen Lavida?

2 Answers
StMadelyn
09/01/25 8:01am
Lavida's method to clear the maintenance reminder is: Turn the ignition key to the 'on' position with your right hand (do not start the engine), press and hold the reset button on the right with your left hand, then turn off the ignition key. Wait until the instrument panel screen goes completely black, then turn the ignition key to the 'on' position again. Release your left hand only when the maintenance reminder disappears automatically. Here is some related information about maintenance reminders: 1. Most cars are equipped with a maintenance reminder warning light. Once the vehicle reaches the mileage requiring maintenance, the maintenance light will illuminate on the dashboard, reminding the owner to service the car promptly. 2. Common styles of maintenance lights include a yellow oil can icon, a yellow wrench icon, or a direct message such as 'Please change oil soon.'
Was this review help?
2
1
Share
McReed
09/14/25 3:42am
I've been driving a Volkswagen Lavida for several years, and clearing the maintenance reminder is quite simple. First, turn the key to the off position to shut off the ignition without starting the engine. Locate the button on the dashboard with a small arrow or labeled 'reset,' usually the trip reset button. Hold it down and don't release, while turning the key to the on position to power up without starting the engine. Keep holding for a few seconds, about 5-10 seconds, and you'll see the maintenance reminder light turn off or the display change. I do this every time after maintenance to avoid the annoying beeping reminder. Actually, this reminder system is a well-intentioned design by the manufacturer to help you track the next service time and avoid forgetting to change the oil or inspect parts. If you don't clear it, the reminder won't harm the car but will keep flashing, affecting your driving focus. For older models, additional steps might be needed—checking the owner's manual is the safest approach.
Was this review help?
15
0
Share
Expand All
More Forum Discussions

Can a vehicle with damaged appearance be driven on the road?

Vehicles with minor appearance damage can be driven on the road. However, if the license plate is damaged, it cannot be driven on the road. Overview of vehicle license plates: Vehicle license plates are standardized hard-numbered plates with a unified format and style as stipulated by national vehicle management regulations. They are issued by vehicle management authorities after reviewing, inspecting, and registering vehicles that have applied for license plates, and they bear unique registration codes. Functions of vehicle license plates: Vehicle license plates are legal certificates permitting vehicles to be driven on the road. They serve as credentials for road traffic management departments, public security management departments, and the general public to supervise vehicle operation, identify, remember, and locate vehicles.
9
5
Share

What is the tire pressure for a spare tire?

Spare tire pressure is the same as normal tires, ranging from 2.3 to 2.5. Overview of car tire pressure: Tire pressure, strictly speaking, refers to the air pressure inside the tire. Tire pressure is the blood pressure of a car, and the level of tire pressure plays a crucial role in the performance and power of the vehicle. The role of car tire pressure: Tire pressure is an indicator of a car's load capacity. The size of the car's load depends on the level of tire pressure. According to the relationship between the tire's load index, tire pressure, and load capacity, the higher the tire pressure, the greater the load capacity; the lower the pressure, the smaller the load capacity.
17
5
Share

What is the difference between a narrow road and a narrow bridge?

Narrow road signs are divided into narrowing on both sides, narrowing on the right, and narrowing on the left; narrow bridge signs refer to structures built where the road width is less than the normal road width. Narrow road signs: The 'narrowing on both sides' sign is used to alert drivers to the narrowing of the road ahead, requiring them to slow down and yield to oncoming traffic. The 'narrowing on both sides' primarily refers to roads that symmetrically narrow along the centerline, with this sign placed at the starting point of roads where the width is reduced to less than 6 meters. Narrow bridge signs: The narrow bridge sign is placed at an appropriate location before a bridge where the road width is less than the normal road width, and the bridge width is less than 6 meters. When crossing a narrow bridge, the speed should not exceed 30 km/h. During nighttime driving, when encountering a narrow bridge traffic warning sign, drivers should switch from high beams to low beams.
11
2
Share

Is the Subject 3 Driving Test Easy to Pass?

As long as you practice more according to the instructor's methods, Subject 3 is relatively easy to pass. Subject 3: Includes the road driving skills test and the safety and civilized driving knowledge test, which is part of the motor vehicle driver's license assessment. It is the abbreviated name for the road driving skills and safety and civilized driving knowledge test in the motor vehicle driver's examination. The content of the road driving skills test varies depending on the type of vehicle being licensed. Subject 3 Test Content: The road driving skills test for Subject 3 generally includes: vehicle preparation, light simulation test, starting, driving in a straight line, shifting gears, changing lanes, pulling over, going straight through intersections, turning left at intersections, turning right at intersections, crossing pedestrian crosswalks, passing school zones, passing bus stops, meeting vehicles, overtaking, making U-turns, and nighttime driving. The safety and civilized driving knowledge test generally includes: requirements for safe and civilized driving operations, knowledge of safe driving under adverse weather and complex road conditions, methods for handling emergencies such as tire blowouts, and knowledge of post-accident procedures.
19
5
Share

Where is the Car Bluetooth Switch Located?

The car Bluetooth switch is usually located on the car's center console. Here is a detailed introduction about the car center console: 1. Overview: The car center console is the area that controls comfort and entertainment devices such as the air conditioning and audio system. It includes the central control door lock system, allowing the driver to control the opening and closing of all doors and the window lift system. 2. Function: The central control door lock system primarily has three functions: central control, speed control, and individual control. The driver can control all door locks, and when the vehicle reaches a certain speed, the doors automatically lock. Additionally, each door has an independent switch, allowing individual control of each door.
17
2
Share

Why does the xenon headlight turn red?

One possible reason for xenon headlights turning red is that the red-emitting lamp begins to leak gas, causing some leakage of xenon gas and metal halides inside. When both lamps are in a cold state, there is a significant difference in internal pressure, resulting in different flashing light colors. Function of xenon headlights: Compared to halogen headlights, xenon headlights offer higher brightness at night, providing greater safety. They are twice as bright as halogen lamps, more energy-efficient, more environmentally friendly, have a longer lifespan, and contain no mercury, causing less harm to the environment. Advantages of xenon headlights: Xenon bulbs produce three times the light intensity of standard halogen bulbs while consuming only two-thirds of the energy. Additionally, xenon bulbs emit a light color nearly identical to daylight, creating better visual conditions for drivers. Xenon lighting systems provide a wider and more intense light distribution, significantly improving driving safety and comfort.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.