How to Clear the Maintenance Reminder on Volkswagen?

1 Answers
DelDawson
07/30/25 6:55am
Volkswagen's steps to clear the maintenance reminder are: 1. Turn off the car's ignition, then press and hold the SET button on the right side of the car's dashboard with your left hand; 2. While pressing the SET button, turn on the ignition, then release the SET button and press it once more; 3. Turn off the ignition, then turn it on again to complete the process of clearing the maintenance reminder. Volkswagen is an automobile manufacturing company headquartered in Wolfsburg, Germany, founded by Ferdinand Porsche. The company owns brands such as Audi and Volkswagen, and its models include Bora, Volkswagen CC, Golf, Sagitar, Jetta, Passat, and Phaeton.
Was this review help?
15
5
Share
More Forum Discussions

What to Do When Water Leakage from the Sunroof Causes Water Accumulation in the Car Mats?

First, check if the window waterproof strips are aged or loose, and replace them if necessary; inspect the door drainage holes for blockages and clear them if found. In most cases, sunroof leakage is caused by clogged sunroof drainage holes. Water leakage from the sunroof can wet the roof trim, and in severe cases, water may "pour" from the sunroof into the cabin. Minor sunroof leakage may only wet the roof trim, while severe cases can lead to extensive water accumulation inside the cabin. Besides water "pouring" in through the sunroof, rainwater can also flow along the A-pillar or C-pillar to the area beneath the car mats, forming pools of water there. If water leakage from the sunroof causes accumulation, the thinner paint in the trunk makes it particularly prone to rust, which can lead to perforation in severe cases. To prevent water from entering the trunk, check if the sealing strips can be pulled off easily. If loose, apply sealant at the joint between the body and the sealing strip and reinstall it. If the trunk sealing strips are aged, replace them. If water is entering through the tail light sealing strips, replace these strips or apply specialized waterproof sealant at the joint between the tail light and the body. Before the rainy season, conduct a thorough inspection of all potential leakage points on the vehicle and replace any aged or poorly sealing components. Taking preventive measures ensures a dry interior during rainy weather.
4
0
Share

Is it necessary to place a sunshade mat on the car dashboard?

It is not necessary to place a sunshade mat on the car dashboard. If you still want to use one, it is recommended to choose a black sunshade mat. In terms of materials, you can opt for non-toxic and harmless rubber or sponge materials to prevent the mat from emitting unpleasant odors after prolonged exposure to sunlight, which could affect the comfort of passengers. Below is some relevant information about sunshade mats: Sunshade mats come with several hazards. The surface of these mats is often made of highly frictional materials that easily attract dust. If the dust on the mat is not cleaned regularly, it can accumulate, and when the vehicle experiences bumps, the dust can become airborne, posing a significant risk to the human respiratory system. Additionally, if the sunshade mat is not positioned correctly, it may obstruct the car's airbags. In the event of a collision, the airbags may fail to deploy properly, increasing the danger to the vehicle's occupants. Furthermore, if the car owner wishes to place decorative items inside the car, they must ensure that these items do not obstruct the driver's view or interfere with the proper deployment of the airbags.
16
5
Share

What is the Chinese translation of ESC?

1. The Chinese translation of ESC is: Electronic Stability Control system. 2. The ESC button in a car is the switch for the electronic stability control system. Pressing and holding this button can turn the electronic stability control system on or off. Additional information: When the ESC function is deactivated (ESC OFF indicator light is on), pressing the ESC OFF button again will enable the ESC system, the ESC OFF indicator light on the dashboard will turn off, and the ESC system will continue to operate. 1. Suitable conditions for ESC use: When the ESC system is activated to correct vehicle stability, reduce speed and pay special attention to road conditions. 2. Precautions for ESC use: The ESC system is only a supplementary system for the vehicle. When the instability of the car exceeds physical limits, it cannot be controlled by this system. Do not rely on the system. Please drive safely. 3. ESC operation status: When the ESC is working, the owner may hear some noise or feel some vibration from the brake pedal or other corresponding systems. This is caused by pressure changes in the corresponding systems.
7
1
Share

Do You Need to Press the Clutch When Shifting Gears in a Car?

1. You need to press the clutch when shifting gears in a car. 2. Situations where the clutch is not pressed: Not pressing the clutch will keep the engine's output shaft engaged with the next gear in the transmission. If the engine's output shaft is not disconnected from the transmission's input shaft during gear shifting, the gears cannot be changed, making it impossible to engage the new gear. Sometimes, this can even lead to gear grinding. Below is relevant information about the clutch: 1. When the clutch functions: The clutch operates when starting the vehicle and shifting gears. During these times, there is a speed difference between the first and second shafts of the transmission. The engine's power must be disconnected from the first shaft so that the synchronizer can effectively match the speed of the first shaft with the second shaft. Once the gear is engaged, the clutch reconnects the first shaft to the engine's power, allowing power transmission to continue. 2. The clutch's damping mechanism: The clutch also includes an essential damping mechanism. It consists of two disc-like flywheels facing each other, with rectangular grooves on the discs containing springs. When subjected to intense impacts, the springs between the two discs act elastically, absorbing external shocks and effectively protecting the engine and clutch. 3. Clutch-related components: Among the various components of the clutch, the strength of the pressure plate spring, the friction coefficient of the friction disc, the diameter of the clutch, the position of the friction disc, and the number of clutches are key factors determining clutch performance. The stiffer the spring, the higher the friction coefficient of the friction disc, and the larger the clutch diameter, the better the clutch performance.
4
1
Share

Does the Ford Escort have high fuel consumption?

The Ford Escort has a fuel consumption of 5.6L-6.8L per 100 kilometers. Below is a related introduction to the Ford Escort: 1. Exterior: The front grille features horizontal slats with a blackened treatment, offering a good sense of fashion and enhancing the vehicle's overall premium feel. The Escort's headlights have an aggressive design with exaggerated styling that provides excellent tension and strong recognition for the front face. The side profile features simple and smooth lines without too many personalized designs, making it more suitable for daily family use. The chrome trim connecting the two headlights is raised, and black decorative panels are added below the bumper, giving the rear a more layered appearance. 2. Interior: The Escort's interior does not have many standout features, and there is significant room for improvement in terms of technological quality, but it still performs well among its peers. 3. Powertrain: The 2019 Ford Escort is equipped with a 1.5L 3-cylinder engine, delivering a maximum power of 90kW and a peak torque of 152N.m. It is paired with either a 6-speed manual or a 6-speed automatic transmission.
17
3
Share

Can You Take the Driving Test Part 2 Before Part 1?

The passing score for the driving license test Part 1 is 90 points, with a total of 100 questions. According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," the test consists of single-choice questions and true/false questions, with each question worth 1 point, totaling 100 points. If 11 questions are answered incorrectly during the test, the system will automatically submit and end the test. Part 1, also known as the theoretical test or driver theory test, is part of the motor vehicle driving license assessment. The test content includes driving theory basics, road safety laws and regulations, local regulations, and related knowledge. The test is conducted on a computer with a time limit of 45 minutes. The content of Part 1 includes: driving license and motor vehicle management regulations; road traffic conditions and regulations; road traffic safety violations and penalties; road traffic accident handling regulations; basic knowledge of motor vehicles; local regulations; knowledge of braking systems and safety devices for large and medium-sized passenger and freight vehicles; specialized knowledge for wheeled self-propelled machinery, trams, and trolleybuses. Notes for Part 1 test: Candidates should pay attention to their attire, no slippers are allowed, and electronic devices and bags are not permitted in the examination room. Bring your ID card and queue to enter the waiting hall. Observe the instructions and procedures on the large screen, and store personal belongings in a locker before entering the examination room. Upon entering, the identity verification station will assign a seat. Once seated, the test begins. Ensure the camera is aligned with you and follow exam discipline. If you fail the first attempt, a retake is available on the same day. If you fail again, you must pay to reschedule. After the test, queue to collect your score report and sign it. Failure to sign renders the result invalid. There is no limit to the number of times you can reschedule Part 1. Each subject can be taken once, with one retake allowed if you fail. If you do not take the retake or fail the retake, the test is terminated, and the applicant must reschedule. However, Part 2 and Part 3 only allow five attempts. Part 2 and Part 3 tests must be scheduled at least ten days apart. If you fail the Part 3 safe and civilized driving knowledge test, the previously passed road driving skills test results remain valid. The driving test consists of three parts: Part 1, Part 2, and Part 3. Part 1 refers to the road traffic safety laws, regulations, and related knowledge test. Part 2 refers to the field driving skills test. Part 3 is divided into two parts: road driving skills and safe and civilized driving knowledge test. The safe and civilized driving knowledge test is conducted after Part 3, so it is commonly referred to as Part 4. However, the official term (as per the Ministry of Public Security Order No. 123) does not include "Part 4."
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.