···
Log in / Register

How to Clear the Maintenance Reminder on the X-Trail?

1Answers
MollyLynn
09/02/2025, 03:54:09 AM

The method to clear the maintenance reminder on the X-Trail involves operating the toggle and confirm buttons on the left side of the steering wheel to access the maintenance interface. After clicking the maintenance option, select the "Engine Oil and Filter" option. Choose the reset option below the number, then adjust the number on the right to 5000 kilometers and click confirm to reset. Below are additional details: 1. The official recommended maintenance interval for the Nissan X-Trail is every 5,000 kilometers, requiring an oil and oil filter change each time. The air filter, fuel filter, and cabin air filter should be replaced every 20,000 kilometers, the brake fluid and coolant every 40,000 kilometers, the transmission fluid every 60,000 kilometers, and the spark plugs every 100,000 kilometers. Compared to other models, the maintenance intervals are generally similar. 2. The official warranty period for the Nissan X-Trail is 3 years or 100,000 kilometers. Additionally, new vehicles receive a free full inspection and maintenance at the first 1,000 kilometers or one month, and another free maintenance opportunity at the first 5,000 kilometers or three months.

Was this review help?
106
Share
More Q&A

Why does the car jerk forward when shifting to D gear?

When the car is cold, the transmission fluid is not fully lubricated, causing the pressure inside the transmission to be either too high or too low, resulting in jerking. Root cause: Since the gear lever of an automatic transmission does not directly control the gear position, it is merely a signal device. After engaging different gears, it sends different signals to the transmission control system, which then controls the gear shifting. However, the transmission requires some time to shift gears, so when you shift to D gear, the gears in the transmission are not actually fully engaged. Tips for using D gear: In automatic mode, upshifting requires the speed and engine RPM to meet certain conditions. When in 2nd gear but the engine RPM is too high, the transmission will automatically upshift. Conversely, when in a higher gear but the speed is relatively low, the transmission will automatically downshift.
120
Share

What does abnormal post-processing wiring harness mean?

Some poor contact or wire issues such as open circuits or grounding may occur. 1. Cause: The natural damage of the wiring harness during use may be due to the product being used for a long time, causing the entire wire of the product to age and the insulation layer to crack. As a result, the mechanical strength performance of the product will decrease. 2. Consequence: The mechanical strength of the wiring harness decreases, making it very easy to cause open circuits and short circuits between wires. This will directly lead to the burning of the wiring harness, and the terminals of the product may oxidize and deform, resulting in poor contact and causing the equipment to malfunction.
105
Share

Does Bridgestone have run-flat tires?

Bridgestone has run-flat tires. Run-flat tire markings: Bridgestone's run-flat marking is RFT, Pirelli's is R-F, Continental's is SSR, Michelin's is ZP, and Dunlop's is ROF. Identification method: Place the tire flat on the ground and stand on it. If the sidewall is hard, it's a run-flat tire. If the sidewall is soft when pressed by hand, it's a regular tire. Run-flat tires: The technical name for run-flat tires is "self-supporting run-flat tires." The inflated tire sidewall is the main part that supports the vehicle's weight. In severe cases of a "blowout," the sidewall usually collapses instantly, causing the tire to lose its support immediately and leading to an abrupt change in the vehicle's center of gravity. This is particularly dangerous for front-wheel-drive vehicles experiencing a front tire blowout, as the sudden shift in the center of gravity can easily cause the vehicle to lose control. The run-flat tire consists of an outer tire, a standard inner tube, a spare inner tube, a steel rim, a gas generator (or air storage chamber), a pressure sensor, and a control unit.
115
Share

What Counts as a Large Displacement Naturally Aspirated Engine?

An engine with a maximum power of 125 kW (approximately 170 horsepower), a maximum torque of 270 N·m, and a turbocharger that can maintain peak performance between 1,500 and 4,000 RPM is considered a large displacement naturally aspirated engine. 1. Displacement Classification: Vehicles with a displacement of 1.0L or less are classified as micro cars; those with a displacement between 1.0L and 1.6L are considered entry-level cars; those between 1.6L and 2.5L are mid-level cars; those between 2.5L and 4.0L are upper-mid-level cars; and luxury cars have a displacement exceeding 4.0L. 2. Displacement and Performance: Generally, cars with larger displacements are bigger in size, and the engine releases more energy per unit time, resulting in better "power performance." 3. Displacement and Fuel Consumption: The fuel consumption per 100 kilometers is an important indicator of a car's fuel economy, and there is a certain relationship between displacement and fuel consumption. Generally, the larger the displacement, the higher the fuel consumption.
118
Share

What are the tips for answering multiple-choice questions in Subject One?

Tips for answering multiple-choice questions in Subject One: 1. Behavior: Any behavior described as a certain type of behavior is illegal. 2. Responsibility: Any responsibility that must be legally pursued is criminal responsibility. 3. Driver's license duration: The probation period for the initial application of a driver's license is 12 months, and the validity period is 6 years. 4. Lights: Any question involving the use of lights, fog lights must be selected in foggy weather, and others should select low beam lights. 5. Speed limit: Any situation where the maximum speed cannot exceed a certain limit, such as when visibility is less than 50 meters due to fog, rain, or snow, when entering or exiting non-motorized lanes, when passing railway crossings, when navigating sharp turns, when driving on narrow roads or bridges, when descending steep slopes or making U-turns, or when driving on muddy roads, etc., the correct answer is 30 km/h.
120
Share

Do Rearview Mirrors Have a Magnification Function?

Rearview mirrors do not have a magnification function. Location of Rearview Mirrors: Car rearview mirrors are located on the left and right sides of the car's front and inside the car's front area. Function: Car rearview mirrors reflect the conditions behind, beside, and below the car, allowing the driver to indirectly see these areas, thereby expanding the driver's field of vision. Adjustment Method: Left Rearview Mirror Adjustment Key Points: Place the horizontal line at the center of the mirror, then adjust the edge of the car body to occupy 1/4 of the mirror's image. Right Rearview Mirror Adjustment Key Points: Place the horizontal line at 2/3 of the mirror, then adjust the edge of the car body to occupy 1/4 of the mirror's image.
118
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.