How to Clear the Maintenance Reminder on the VV7?
4 Answers
The method to clear the maintenance reminder on the VV7 is: Press and hold the reset button under the dashboard while stepping on the brake, turn the ignition switch to the ON position, wait until the screen displays "INS" or the display flashes, continue pressing the reset button until a series of dots appear on the display, then release the reset button and the brake, turn the ignition switch to the OFF position, and the maintenance light reminder will be cleared. The dimensions of the VV7 are 4760mm in length, 1931mm in width, 1655mm in height, with a wheelbase of 2950mm. In terms of power, the vehicle is equipped with a GW4C20A 2.0T turbocharged engine, paired with a 7-speed wet dual-clutch transmission, manual driving mode switching, and F1 racing-style paddle shifters.
As a long-term owner of the WEY VV7, I often encounter the issue of the maintenance reminder light coming on. Clearing it is actually quite simple. First, park the car in a safe place and turn off the engine. Then, turn the key or press the power button to the ACC mode, allowing the dashboard to light up without starting the engine. Use the left and right buttons on the steering wheel to navigate to the settings menu, scroll to the vehicle information section. There should be a maintenance reminder option inside—select it and press the ENTER key to confirm the reset. Once done, the reminder light will turn off. I recommend doing this step immediately after maintenance; the system will then recalculate the next reminder time, avoiding missed or repeated warnings. Handling it yourself daily saves both time and money, eliminating the need to visit a repair shop.
From the experience of a car enthusiast, clearing the maintenance reminder for the WEY VV7 is a basic skill. After stopping by the roadside, turn the key to the ON position or press the start button twice to enter ACC mode. Look at the dashboard and use the control lever or steering wheel buttons to switch to the information display menu. Find the maintenance information section, select the reset option, and confirm the operation. Remember to check if the car has undergone maintenance first; otherwise, clearing it won't help. The entire process takes less than a minute, ensuring the system accurately tracks the maintenance cycle for safe driving.
When I first started driving, the maintenance light on my VV7 came on and I didn't know how to handle it. I asked a friend for advice. The method was to park the car, turn off the engine but keep the electrical system on. Press the MENU button a few times to find the maintenance settings, select reset, then press the confirm button. The prompt disappeared—simple and effective.
