How to Clear the Maintenance Reminder on the Octavia?
2 Answers
The method to clear the maintenance reminder on the Octavia: Turn off the ignition, press and hold the set button below the instrument panel, turn on the ignition, then release the set button, and finally press the 0.0 button. The Octavia is a compact sedan under the Skoda brand, with body dimensions of 4675mm in length, 1814mm in width, and 1460mm in height, and a wheelbase of 2686mm. In terms of power, the Octavia is equipped with three engines: a 1.5L naturally aspirated engine, a 1.2L turbocharged engine, and a 1.4L turbocharged engine. The Skoda Octavia is front-wheel drive. The 1.5L naturally aspirated engine has a maximum power of 81kW and a maximum torque of 150Nm; the 1.2L turbocharged engine has a maximum power of 85kW and a maximum torque of 200Nm; the 1.4L turbocharged engine has a maximum power of 110kW and a maximum torque of 250Nm.
Last time I drove my Skoda Octavia and encountered the maintenance reminder, clearing it was quite simple: First, turn off the engine, then turn the key to the ON position (without starting the car) to light up the dashboard. Next, press and hold the small button on the left side of the dashboard or the mode button on the steering wheel for a few seconds until the service menu pops up on the screen. Select 'Reset' and confirm. The button positions may vary slightly depending on the model year, with older models using physical buttons and newer ones possibly featuring touchscreen controls. After completing the operation, the reminder light will disappear, but remember this only resets the counter—actual maintenance should still be done on time to avoid engine or other component issues. I recommend checking the vehicle manual before proceeding to ensure the method is correct; if you make a mistake, the system might malfunction, making rework more troublesome. DIY saves time and money, but don’t skip the actual maintenance—safe driving is the top priority.
