How to Clear the Maintenance Reminder on Hyundai Elantra?

1 Answers
StJasper
07/29/25 12:48pm
Methods to clear the maintenance reminder on Hyundai Elantra: 1. First, press the start button to turn on the vehicle; 2. Press the information switch button on the steering wheel; 3. Press the SET button on the steering wheel; 4. The maintenance reminder will appear on the vehicle display screen; 5. Press the close button on the steering wheel to clear the maintenance reminder. The Hyundai Elantra is an A-segment sedan and the sixth-generation product of the Elantra series. It is equipped with a 1.6L naturally aspirated engine, delivering a maximum power of 130 horsepower and a maximum torque of 157 Nm, paired with a 6-speed automatic transmission.
Was this review help?
3
4
Share
More Forum Discussions

What Causes Squeaking After Replacing Brake Pads?

There are several reasons for squeaking after replacing brake pads: 1. The brake pads have reached the warning line or are worn to their limit. 2. The brake pad material is relatively hard. 3. Improper installation of the brake system. The operation of braking primarily comes from friction, utilizing the friction between the brake pads and the brake discs, as well as between the tires and the ground, to convert the vehicle's kinetic energy into heat energy through friction, thereby stopping the car. A good and efficient braking system must provide stable, sufficient, and controllable braking force, with excellent hydraulic transmission and heat dissipation capabilities, to ensure that the force applied by the driver on the brake pedal is fully and effectively transmitted to the master cylinder and the wheel cylinders, avoiding hydraulic failure and brake fade caused by high temperatures.
10
4
Share

What is the validity period after the second renewal of a driver's license?

The validity period after the second renewal of a driver's license is 10 years. Article 56 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" states: If a motor vehicle driver has not accumulated 12 penalty points in any scoring cycle during the six-year validity period of their motor vehicle driver's license, they will be issued a motor vehicle driver's license with a ten-year validity period upon renewal. If the driver has not accumulated 12 penalty points in any scoring cycle during the ten-year validity period of their motor vehicle driver's license, they will be issued a long-term valid motor vehicle driver's license upon renewal. Renewal deadline: The motor vehicle driver should apply for renewal at the vehicle management office of the issuing authority within 90 days before the expiration of the current driver's license. The "Motor Vehicle Driver's License Application Form" must be completed during the application. Required materials for renewal: Bring two copies of ID card, two recent 1-inch color photos without a hat, original ID card, original driver's license, and a medical examination certificate from a county-level or above hospital (free physical examinations are also available at the vehicle management office). Renewal process: The motor vehicle driver submits the required materials to the vehicle management office of the issuing authority for renewal. The vehicle management office will process the renewal within one working day after approval.
13
5
Share

Where is the USB port on the Buick GL8?

The USB port of the Buick GL8 is located below the center console. Here are the functions of the USB port on the Buick GL8: 1. Insert a USB drive to listen to music. 2. Charge mobile phones. 3. USB car cigarette lighter. 4. Car vacuum cleaner. 5. Install a radar detector or dash cam. The Buick GL8 is a commercial vehicle under SAIC-GM Buick. Its features are as follows: 1. The new Buick GL8 Business Traveler retains the overall design of the second-generation Buick GL8. The front grille has been updated from the waterfall-style to Buick's latest wing-shaped design, maintaining the original business aesthetic while adding a sporty touch to attract a broader customer base. 2. In terms of space, the new Buick GL8 Business Traveler inherits the advantages of the second-generation GL8, offering ample seating space. The passage between the second-row seats is spacious enough to facilitate easy access for elderly passengers and children to the third row. 3. The Buick GL8 Business Traveler is equipped with a 2.5L naturally aspirated engine paired with GM's latest 6-speed automatic transmission.
11
2
Share

Should I Install Cruise Control?

If you frequently drive on highways, it is necessary to install it. If you rarely drive on highways, then there is no need to install it. Below are the guidelines for using cruise control: 1. In principle, cruise control should be used on highways or fully enclosed roads. This is because on non-enclosed roads, complex road conditions are not conducive to traffic safety. On national highways, some tractors lack sufficient power and often rush onto the road at small intersections, posing a serious threat to vehicles on the highway. With cruise control engaged, it is easy to be caught off guard. Repeated braking also makes it difficult to maintain a stable cruise control state, defeating the purpose of cruise control. 2. It is prohibited to use in rainy weather and on snowy or icy roads. 3. It should be disabled on winding mountain roads or roads with too many curves. This is because, under normal circumstances when exiting a curve, it is necessary to appropriately accelerate to provide steering force. With cruise control engaged, the speed remains constant, and the throttle is controlled by the vehicle's computer, often posing a danger when driving on curves. 4. Cruise control is also unsuitable on roads with heavy traffic.
20
4
Share

How to Check the Oil Level in a Volvo XC60?

Volvo XC60 new models are equipped with an electronic oil dipstick, which can be checked through the oil level option in the onboard computer menu. Older XC60 models feature a traditional electronic oil dipstick. To check the oil level, turn off the engine, let it sit level for 15 minutes, then open the engine compartment to inspect the dipstick. The optimal oil level is between the lower and upper marks. At this point, the engine oil quantity is appropriate. Below is an introduction to the electronic oil dipstick: 1. The electronic oil dipstick, like the conventional one, is marked with upper and lower limits. If the oil level is near the lower limit, it does not indicate the oil quantity in the oil pan but shows that the oil level is approaching the minimum of the normal range. Driving can continue without issues, but the oil will continue to deplete over time until it reaches the bottom. When the electronic oil dipstick shows a low reading, the actual oil level is just above the minimum quantity. Although the oil level is low, it remains within the normal range. If a maintenance plan is scheduled soon, it can be ignored. 2. For a conventional oil dipstick, the first step is to wipe it clean, reinsert it, and then pull it out again. As long as the oil level is within the marked upper and lower limits, it is acceptable. In vehicles, the oil dipstick is a common tool for checking the lubricant level in the oil reservoir. Due to the curved path of the dipstick tube, the dipstick must be able to rebound to its original shape after insertion. The oil dipstick's function is not only to check the engine oil level. Experienced drivers or mechanics can detect various engine operating conditions by inspecting the dipstick, enabling quick responses and accurate judgments, providing reliable references.
1
5
Share

What are the differences between a coupe and a sedan?

The differences between a coupe and a sedan are as follows: 1. Engine, appearance, and driving comfort. Engine: Coupes are equipped with high-power, high-torque, high-speed engines to achieve fast speed, quick acceleration, and excellent re-acceleration performance. 2. Sedans, considering economic factors, opt for engines with moderate horsepower, small displacement, and low fuel consumption. 3. Appearance: Coupes are designed with a streamlined and low-profile body to reduce air resistance and ensure stability at high speeds. Sedans, on the other hand, prioritize spacious interiors and the ability to accommodate more passengers, resulting in a taller body compared to coupes. 4. Comfort: Coupes are built for speed, and speed is inversely proportional to vehicle weight. To pursue speed, they often eliminate non-essential features like sound systems and air conditioning. 5. Coupes provide effective support for the outer wheels during high-speed turns, and their suspension systems are stiffer than those of sedans. Sedans, with their spacious interiors, moderately tuned suspension systems, and smooth acceleration, offer a more comfortable ride.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.