How to Clear the Maintenance Reminder on CS75?

[SavannahRose]

Changan CS75 maintenance reminder clearing steps: 1. First, turn the car key to the ON position (full vehicle power-on state - turn key twice or press start button twice for keyless systems). 2. Then press the selection button on the steering wheel; hold the reset button for about 5 seconds (keep the reset button pressed continuously). 3. Turn off the power (while still holding the reset button), then turn the vehicle power back on to clear the maintenance reminder. Below is relevant information about vehicle maintenance: 1. Modern vehicle maintenance primarily includes engine systems, transmission systems, air conditioning systems, cooling systems, fuel systems, power steering systems, etc. 2. The purpose of vehicle maintenance is to maintain clean appearance, normal technical conditions, eliminate potential issues, prevent faults, slow deterioration processes, and extend service life. Routine maintenance refers to daily checks performed before driving, during operation, and after parking, which are the driver's responsibility. The main tasks involve cleaning, replenishment, and safety inspections - these are essential regular tasks to maintain normal vehicle operation.

[Debra]

I just figured out how to reset the maintenance reminder on my CS75, and it's pretty simple. First, turn off the ignition completely so the car is fully shut down. Then, press and hold the TRIP button on the dashboard without releasing it. Next, turn the ignition to the ON position (the one where the engine doesn't start) while still holding the button. Keep holding it for about 10 seconds, and you'll see the little wrench or text prompt on the dashboard gradually disappear. After that, release the button and turn off the ignition. Just note that the button location might vary depending on the model year—mine has a small knob on the left side of the steering wheel that you press and hold. If it doesn’t work the first time, try a few more times or check the owner’s manual—it usually has diagrams. If you forget to reset it, the light will stay on, which doesn’t affect driving but can be annoying and serves as a reminder for regular maintenance. If you really can’t get it done, just visit the 4S shop—they’ll handle it in a minute. Remember to ensure the car is parked on a flat, safe surface when doing this—don’t try it on a slope.

[HavenLee]

I've been driving the CS75 for several years, and my experience with eliminating the maintenance reminder tells me it can be done in just a few steps. First, turn off the engine and all power. Second, locate a small reset button near the dashboard or steering wheel and hold it down without releasing. Third, turn the key to the ON position—the dashboard lights up but don't start the engine—and continue holding the button until the wrench icon disappears. Once it's gone, release the button and turn off the ignition. This method works for most model years, but some newer models might require adjustments through the system menu. If the icon remains, you might not have pressed the right button or held it long enough—just be patient and try again. I believe this shouldn't be delayed, as the maintenance reminder can distract you while driving. Even though the car can still run, it affects your mood. Resetting it yourself after each service saves money and hassle. If you forget the steps, check the owner's manual or follow a video tutorial on your phone.

[VonPiper]

Let me show you how to clear the maintenance reminder on your CS75 – it's as easy as turning off an annoying alarm. First, turn off the ignition and locate the button on the dashboard. Press and hold it, then turn the ignition to the ON position (lights on but engine off). Keep holding the button until the reminder disappears before releasing it. Finally, turn off the power. The whole process takes just a minute or two. If your memory fails you, don’t worry – just check the car’s manual; it definitely has instructions. The maintenance reminder pops up to tell you your car needs a break. If you don’t clear it, the light stays on, which isn’t harmful but can be annoying. If you’re still unsure, don’t stress – ask a family member or visit a repair shop for help.

[Stone]

My experience resetting the CS75 maintenance reminder: After turning off the engine, hold down the TRIP button continuously, then turn the ignition to the second position. Keep pressing for about ten seconds until the dashboard warning disappears before releasing. Finally, turn off the power. Quick and easy. If it doesn't work, the button might be in the wrong position—usually a small knob near the steering wheel that needs to be pressed down. Remember to park on level ground before doing this. This warning light is the car's thoughtful reminder for due maintenance. After clearing it, you can drive without distractions. Nowadays, new cars can even use mobile apps for remote settings. If it feels troublesome, going to the shop gets it done faster.