How to Clear the Maintenance Reminder on a 2019 Bin Yue?

1 Answers
VanDominic
07/29/25 2:50pm
Method to clear the maintenance reminder on a 2019 Bin Yue: 1. Turn the ignition switch to the NO position, keeping the engine off; 2. Press the button in the middle of the wiper until the dashboard displays 0KM; 3. Hold the button on the dashboard for about 5 seconds until 6000KM appears; 4. Release the button to clear the maintenance reminder. The Bin Yue is equipped with two engines: a 1.4L turbocharged engine with a maximum power of 141 horsepower and a maximum torque of 235 Nm, and a 1.5L turbocharged engine.
Was this review help?
9
5
Share
More Forum Discussions

Is it harmful to turn off the engine directly when the car's water temperature is too high?

Turning off the engine directly when the car's water temperature is too high is a wrong behavior. When the car's water temperature is too high, first slow down, then pull over to the side of the road. Do not turn off the engine immediately, because excessively high water temperature will cause the piston, cylinder walls, cylinder, crankshaft, etc., to overheat, thinning the engine oil and losing its lubricating effect. If the engine is turned off immediately at this time, the mechanical parts are in an expanded state, and the gaps between various components are very small, which may cause some soft metals to peel off or even lead to cylinder sticking. Reasons for excessively high water temperature: 1. Insufficient coolant: First, check the coolant level. If you are on a highway or in a remote area and there is no coolant in the car, you can temporarily use water as a substitute. Note: Do not open the radiator cap or water tank cap immediately after stopping the car, as the internal pressure is too high, and opening it may cause instant spraying, which can easily lead to burns. 2. Dirty radiator: The radiator has many pores formed by cooling fins, which are prone to being clogged with fluff, sludge, etc., reducing ventilation and cooling efficiency. In winter, poor cooling efficiency is not a big problem because the ambient temperature is low. However, in summer, when the ambient temperature is already high, a clogged radiator with poor cooling can easily cause the water temperature to rise.
6
3
Share

What sedans does GAC Toyota have?

GAC Toyota's sedan lineup includes the Yaris L, Levin, and Camry. Below is more information about these three models: 1. The Toyota Yaris L is a compact sedan launched by Toyota, with body dimensions of 4440mm in length, 1700mm in width, and 1490mm in height, and a wheelbase of 2550mm. 2. The Levin is another compact sedan from Toyota, measuring 4640mm in length, 1780mm in width, and 1455mm in height, with a wheelbase of 2700mm. This model is equipped with two types of engines: a 1.8L naturally aspirated engine and a 1.2L turbocharged engine. 3. The Camry has body dimensions of 4885mm in length, 1840mm in width, and 1455mm in height. It comes with three engine options: the pure gasoline models are equipped with a 2.0L naturally aspirated engine and a 2.5L naturally aspirated engine, while the hybrid version features a 2.5L naturally aspirated engine paired with a 120-horsepower electric motor.
9
1
Share

What is the engine model of the Song Pro?

The BYD Song Pro is equipped with a turbocharged engine codenamed BYD476ZQB, which has a displacement of 1.5 liters. Here are some details about this engine: 1. This engine delivers a maximum horsepower of 160 HP, a maximum power output of 118 kW, and a maximum torque of 245 N·m. The peak power is achieved at 5,200 rpm, while the peak torque range is between 1,600 and 4,000 rpm. 2. It features direct fuel injection, with both the cylinder block and cylinder head made of aluminum alloy. Additional information: 1. Dimensions. The BYD Song Pro measures 4,650 mm in length, 1,860 mm in width, and 1,700 mm in height. In terms of power, the entire BYD Song Pro lineup is equipped with a 1.5-liter turbocharged engine producing a maximum horsepower of 160 HP. 2. Transmission. The entire BYD Song Pro lineup uses a 6-speed dual-clutch transmission. 3. Suspension. The front suspension of the BYD Song Pro is a MacPherson strut independent suspension, while the rear suspension is a multi-link independent suspension. 4. Drivetrain. The BYD Song Pro features front-engine, front-wheel drive.
8
5
Share

What is the Difference Between Mineral Oil and Semi-Synthetic Oil?

Mineral oil and semi-synthetic oil mainly differ in the following aspects: 1. Mineral oil is produced by refining petroleum into base oil and then adding additives; semi-synthetic oil is made by chemically synthesizing base oil and adding additives. 2. Although mineral oil is inexpensive, its service life and lubrication performance are inferior to semi-synthetic and synthetic oils, and it also causes significant environmental pollution. Semi-synthetic oil is a product refined from mineral oil through hydrocracking technology, with purity very close to that of full synthetic oil. Its cost is slightly higher than mineral oil, making it an ideal transitional product from mineral oil to synthetic oil.
20
3
Share

What does the 'A' button in a car mean?

It refers to the Auto-Hold system. Here are some introductions about the Auto-Hold system: 1. AUTO-HOLD relies on the intelligent braking system, and only vehicles equipped with brake control systems like ESP can implement the AUTO-HOLD function. 2. Auto-Hold refers to an automatic braking function. Once activated, for example, when stopping at a traffic light, you don't need to pull the handbrake. It simplifies operations by avoiding the use of the handbrake or electronic handbrake, and for automatic transmission models, it eliminates the need for frequent switching between D to N or D to P.
19
2
Share

What is the tire pressure range for the Lavida?

The normal tire pressure for the Volkswagen Lavida is between 2.4 and 2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and decreased by 0.1 bar in summer. This data complies with the international GBT2978-2008 standard. The Volkswagen Lavida's tire pressure monitoring system is displayed on the dashboard and is enabled by default. When the tire pressure is abnormal, the tire pressure warning light will illuminate to alert the driver. There is no physical button for the tire pressure monitoring system in the vehicle. Generally, a tire pressure exceeding 2.8 bar is considered too high, while a tire pressure below 2.0 bar is considered too low. Hazards of overinflated tires: Reduced tire friction and adhesion, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates uneven wear on the central tread of the tire, shortening tire lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; overstretches the tire cords, reducing elasticity and increasing the load on the vehicle during driving. Hazards of underinflated tires: Increases friction with the road surface, leading to higher fuel consumption; makes the steering wheel heavy and prone to deviation, compromising driving safety; increases movement in various parts of the tire, causing abnormal heat due to excessive rolling; weakens the function of the cords and rubber, leading to delamination or cord breakage and excessive friction with the rim, damaging the tire bead and causing abnormal wear; multiplies friction between the tire and the ground, rapidly raising tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may result in a tire blowout. If the tire pressure monitoring indicator light illuminates (a yellow symbol with an irregular circle, no stamp on top, four small spikes below, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure: Typically, the system will alert if the pressure is below 1.8 bar or above 3.0 bar. In this case, the tires need to be checked and the pressure adjusted. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset promptly, the system will still record the previous data, causing the tire pressure monitoring light to illuminate. Simply reset the tire pressure to resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, which monitors tire pressure, is installed inside the tire and connected to the tire inflation valve. If the sensor is damaged due to impact while driving, the tire pressure warning light will illuminate. For sensor damage, the only solution is to replace it with a new component.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.