How to Clear the Maintenance Reminder on a 2017 Focus?

1 Answers
LeviMarie
07/29/25 3:24pm
First, insert the vehicle key and start the car. Then locate and hold the button on the lower right side of the instrument panel until you hear a "ding" sound. Next, press the OK button on the multifunction steering wheel to clear the maintenance reminder on the dashboard. Here are some relevant details: 1. When a vehicle is sold or after maintenance, a maintenance reminder is usually set. When the vehicle's mileage or time reaches the maintenance standard, the maintenance light will illuminate, indicating that the vehicle should be serviced as soon as possible to ensure optimal operating conditions. 2. If the dealership forgets to set a new maintenance mileage after servicing, you can refer to the vehicle's manual to find the method for resetting the maintenance mileage. If you are unable to perform the operation, you can also take the car to the dealership or an auto repair shop and have a professional mechanic reset the maintenance light, thereby clearing the maintenance mileage reminder.
Was this review help?
14
3
Share
More Forum Discussions

Is the Camry's spare tire full-size?

The Camry's spare tire is not full-size. Here is some information about the Camry: 1. In terms of appearance, the Camry features dual styling designs for the luxury version and the sport version, both of which are derived from Toyota's latest "Keen Look" design language. The luxury version adopts a large trapezoidal horizontal grille, with a streamlined body posture, lower waistline, and an extended roof rear section that increases rear headroom. The sport version features a three-layer grille front face and, for the first time, a two-tone body and "all-black" cabin design, with a dual-sided quad-exhaust pipe layout at the rear. 2. The hybrid version is based on the luxury version, with light blue front and rear lights highlighting its identity. The hybrid version also adds a sport version styling, maintaining the main design of the current fuel-powered sport version while revealing its hybrid identity through some detailed elements.
11
2
Share

What type of gasoline should the Mercedes-Benz E-Class use?

Mercedes-Benz E-Class uses 95-octane gasoline. Gasoline is a volatile and flammable hydrocarbon mixture liquid derived from petroleum through distillation or cracking processes, used as fuel with a high octane rating. Taking the 2021 Mercedes-Benz 260L as an example, it is a mid-to-large-sized 4-door 5-seater sedan with body dimensions of 5078mm in length, 1860mm in width, and 1484mm in height, with a wheelbase of 3079mm. The 2021 Mercedes-Benz 260L is equipped with a 1.5T turbocharged engine and a 9-speed automatic transmission, delivering a maximum power of 135 kilowatts and a maximum torque of 280 Newton-meters.
17
1
Share

How to remotely start the Honda Inspire with the key?

Honda Inspire's remote start can be operated using the remote key as follows: 1. Press the lock button. 2. Press the button with a circular arrow on the remote to start. 3. The vehicle starts the engine or motor via the signal sent by the remote key. Here is some additional information about the Honda Inspire: 1. The Honda Inspire is a mid-size car. 2. Body dimensions are: length 4910mm, width 1862mm, height 1450mm, wheelbase 2830mm. 3. Fuel tank capacity is 48 liters, curb weight is 1574kg. 4. The front suspension is MacPherson independent suspension, and the rear suspension is multi-link independent suspension. 5. It is equipped with a 2.0L naturally aspirated engine, with a maximum horsepower of 146PS, maximum power of 107kW, maximum torque of 175Nm, paired with an electronic continuously variable transmission.
15
5
Share

How much fuel does a 350 horsepower engine consume at idle for one hour?

350 horsepower at idle for one hour consumes approximately 12 liters of fuel. Below are specific details about car idling: Definition: When the engine runs without load, it is called idling. When the accelerator pedal is fully released while the engine is running, the engine enters idle state. The rotational speed of the engine during idling is referred to as idle speed. Function: Idling overcomes the engine's own operational resistance, maintains the minimum engine speed, and provides convenience for drivers in various driving and temporary parking situations. For example, at traffic lights or in congested traffic areas, although the time may be short, temporarily turning off the engine can achieve energy-saving and emission-reducing effects.
4
1
Share

What to do if the brake pedal of Haval H2 is hard to press when starting the engine?

The solutions for the hard-to-press brake pedal when starting the Haval H2 are: 1. Check if the gear is in the P position. 2. Check if the steering wheel is in the locked state. 3. Inspect or replace the remote key battery. Taking the 2018 Haval H2 manual two-wheel-drive fashion model as an example, the following are its specifications: 1. Body dimensions: length is 4365mm, width is 1814mm, height is 1710mm, wheelbase is 2560mm, and fuel tank capacity is 50l. 2. Power: equipped with a 1.5l turbocharged engine, maximum power is 110kw, and the maximum power speed is 5600 to 6000rpm per minute.
7
2
Share

What Causes the Engine Warning Light to Illuminate on a Besturn B50?

The main reasons for the engine warning light to illuminate include sensor malfunctions, car maintenance issues, fuel quality problems, poor mixture combustion, engine intake issues, turbocharging problems, exhaust system faults, and anti-theft system failures. Additionally, when the car is started, the vehicle performs a self-check on the engine system. Normally, the engine warning light should turn off after the self-check is completed. If it remains illuminated for an extended period, it is advisable to promptly visit a repair station for professional assistance to diagnose and eliminate potential safety hazards. Below is a detailed explanation of each possible fault: Sensor Issues: Sensors include those for coolant temperature, crankshaft position, air flow, intake temperature, and oxygen levels. If these sensors are damaged, have poor connections, or experience signal interruptions, the car's ECU cannot accurately obtain engine data, triggering the engine warning light. In such cases, it is essential to seek professional inspection at a service center to promptly address safety risks. Maintenance Issues: Poor engine maintenance is the most common cause of the engine warning light illuminating. Vehicles have specific maintenance schedules, and failing to adhere to them, combined with poor driving habits, can increase the engine's operational burden, eventually causing the warning light to turn on as a signal of engine trouble. Fuel Quality Issues: This refers to both fuel and engine oil. Cars typically require fuel of a specific grade, and engine oil can be semi-synthetic or fully synthetic. Manufacturers usually recommend the appropriate fuel grade and oil type. If the owner fails to use the recommended specifications over time, it can lead to engine wear, triggering the warning light. Always use the correct fuel grade and suitable engine oil as specified for the vehicle. Poor Mixture Combustion: Faulty spark plugs, ignition coils, fuel pumps, or clogged fuel lines can cause poor mixture combustion in the engine. This leads to carbon buildup or knocking issues, which the oxygen sensors detect and report to the ECU, prompting the warning light to illuminate as a warning. Intake Issues: Proper air intake is crucial for engine combustion. The air filter plays a vital role, and if it becomes dirty or is not cleaned regularly, it can obstruct airflow. Over time, this may lead to blockages, and in severe cases, trigger the engine warning light. Turbocharging Issues: Problems with the intake boost system or turbocharger can also cause the engine warning light to illuminate. The most common issue is a damaged turbocharger, often accompanied by symptoms such as oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Exhaust System Issues: Faults in the rear oxygen sensor, catalytic converter, exhaust camshaft, or bearings can trigger the warning light. The most frequent cause is a malfunctioning catalytic converter, which can result from using leaded gasoline, additives containing lead or silicon, physical damage to the converter, or fuel system issues. Anti-Theft System: If the car's electronic anti-theft system malfunctions or the anti-theft controller is incompatible with the engine ECU, the system may prevent the engine from operating correctly, causing the warning light to illuminate. Solutions for an Illuminated Engine Warning Light: If the engine warning light is on and the car cannot start, this may be due to a faulty fuel pump or ignition components. In such cases, it is best to call for roadside assistance. If the warning light is on but the car is still drivable, yet exhibits severe shaking or loss of acceleration, pull over safely and call for help. If the warning light is on but no noticeable driving issues occur, it may indicate a minor sensor fault. While you can continue driving cautiously at low speeds, it is advisable to visit a repair shop as soon as possible to address the issue.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.