How to clear the maintenance reminder for the 2020 Emgrand?

[DeRuby]

Method to clear the maintenance reminder for the 2020 Emgrand: After starting the vehicle's engine, press the SET button, then press the MODE button, and finally press the cancel button on the left side of the steering wheel. The following are precautions for car maintenance: 1. Avoid directly wiping the paint surface with a duster or dry cloth. Rinse off dust and dirt from the car's surface with water, then wipe it clean with a dry absorbent cloth. Do not let it air dry after rinsing. 2. When parking, try to avoid prolonged exposure to sunlight, especially for white and non-metallic paint. 3. Reduce the frequency of car washing and avoid waxing and polishing the vehicle. 4. Be aware of corrosive substances like bird droppings and remove them promptly.

[Adalynn]

I remember when the maintenance reminder light came on last time, sitting in my 2020 Emgrand, I inserted the key and turned it to the ON position without starting the engine, waiting for the dashboard to fully light up. Then, I held down the OK button on the right side of the steering wheel for 5 seconds until the central display popped up a menu. Next, I used the directional buttons to navigate left or right to 'Vehicle Settings', looked for the 'Maintenance' or 'Service' section, and clicked into it to find 'Reset Maintenance Interval'. Confirming this action cleared the reminder. The process was quite straightforward, and I've tried it a few times without any issues. However, don't operate it while driving; safety first. The maintenance reminder alerts me to change the oil and filter regularly, ensuring the engine stays healthy and runs longer. Developing a habit of checking every 5,000 kilometers can save a lot of trouble with repairs.

[McVictoria]

The maintenance reminder reset is actually quite a common procedure: First, close all doors and sit down, turn the key to the ACC position (which powers up the center console), but don't start the engine. Then, look at the steering wheel, press and hold the Menu button or OK button for about 3 to 5 seconds until the menu pops up on the screen. Use the directional buttons to navigate to 'System Settings', find the 'Maintenance Info' option inside, select 'Reset' after opening it, and confirm—the wrench icon will disappear. I often help my neighbors with this; they always say the steps are simple but easy to forget. Be careful not to get distracted and press random buttons during the process, as it might lead to adjusting other settings incorrectly. Develop a habit of regular maintenance, such as changing the oil and air filters, to avoid increased fuel consumption.

[LeJade]

Don't panic when the maintenance reminder lights up. First, park the car safely and turn off the engine, then turn the key to the power-on position and wait for the dashboard to flash. At this point, press and hold the settings button on the steering wheel for a few seconds until the menu appears. Navigate to the maintenance section and select reset. For safety, avoid doing this in the middle of the road. After resetting the reminder, it's advisable to note down the mileage for the next reminder. Regular oil changes are crucial for maintenance to protect the engine and prevent malfunctions.

[LilahRose]

My 2020 Emgrand keeps showing the maintenance reminder after each service. Here's how I reset it: Sit in the car, insert the key and turn it twice without starting the engine (all dashboard lights should illuminate). Long-press the OK button until the menu appears, scroll to Vehicle Settings, select Maintenance Option and confirm reset. It's actually quite foolproof - you'll get the hang of it after a few tries. The key is to proceed slowly to avoid misoperation. Remember, the maintenance reminder is your car's 'health calendar' - don't forget actual servicing after resetting. Changing engine oil and filters keeps your ride smoother. Get in the habit of noting the next service date for peace of mind.

[ElijahLee]

When the maintenance reminder appears while driving the 2020 Emgrand, I enjoy studying circuit details: First, turn the key to the ON position without starting the engine. After the dashboard functions activate, press and hold the control combination buttons on the steering wheel until the main menu pops up on the screen. Use the directional keys to switch to 'Settings' and enter the submenu to find the 'Service Options'. Locate the maintenance interval reset point and confirm. This is based on the vehicle's ECU control logic, so avoid accidentally pressing other buttons during the operation. After each reset, note down the mileage to coordinate with the maintenance plan, which helps extend the car's life. Regular oil changes are crucial for protecting the engine.