How to Clear the Maintenance Information on the Volkswagen New Sagitar?

[VonDerek]

Here is the method to eliminate the maintenance reminder on the Volkswagen New Sagitar: 1. Turn off the ignition switch to ensure the vehicle is off. 2. Press and hold the "0.0" button on the dashboard. 3. While turning on the ignition switch, keep holding the "0.0" button without releasing it. 4. Pay attention to the information display on the dashboard; when text appears, release the "0.0" button. 5. Press the "0.0" button once again. 6. At this point, the maintenance light should be reset. If it hasn't reset, start the process from the beginning. Here is some related information: 1. When the maintenance light comes on, it indicates that the vehicle's scheduled maintenance period has arrived, and maintenance should be performed promptly. Not all vehicle models can be manually reset; some models require specialized equipment from the manufacturer to clear the code. 2. If you frequently drive in harsh environmental conditions, maintenance should be performed before the maintenance light comes on.

[McVictoria]

As a Volkswagen Sagitar owner, I've cleared the maintenance reminder several times myself. Last month after the service, the yellow wrench icon was still lit, so I followed my usual method: First, get in the car without starting the engine, turn the key to the ON position (just keep the brake pedal pressed), then locate the dotted button on the right side of the instrument cluster, hold it for about 5 seconds until the maintenance menu pops up on the screen, and select the 'Reset' option to complete the process. The whole thing can be done while sitting in the car - simple and convenient. I recommend clearing it this way after every service, otherwise the flashing reminder light can be worrying and might affect driving record accuracy. Remember to check your vehicle manual to confirm button locations. Beginners should practice more for safety, and timely maintenance leads to longer vehicle lifespan.

[Silva]

To clear the maintenance reminder on the Volkswagen New Sagitar, I recommend these steps: First, park the car stably, turn the key to the ON position without starting the engine. Then, locate the button with the 0.0 symbol on the dashboard, press and hold it firmly for a few seconds until the menu pops up displaying the maintenance information option. Release your finger and tap reset. I've found it's best to perform this operation when the engine is cold, as releasing the button too quickly may cause it to fail. After the maintenance light goes off, remember to check if the vehicle status lights are normal to avoid any misoperation. This trick is easy to learn and relates to the vehicle's user-friendly design, ensuring more efficient maintenance when done on time.

[LaEvelyn]

The key to clearing maintenance information is to correctly operate the settings menu. I usually adjust to the ignition position after getting in the car, hold the reset button until the system responds, then select the reset option to complete it effortlessly. The Volkswagen system is sensitive, and incorrect steps will prompt a retry, with safety first ensuring the vehicle remains stationary. Regular resets maintain accurate reminders and extend maintenance intervals.

[AlexandraRose]

If you're a new driver, clearing the maintenance message on the Sagitar is quite simple. Here's how I did it when I first started: Sit in the driver's seat, turn the key to the ACC position without pressing the accelerator, then locate the small button near the steering wheel. Hold it down and watch the screen changes - usually the 'Maintenance' prompt appears within seconds. Just follow the instructions to reset. The operation is simple and risk-free. Remember to do this after servicing to ensure timely reminders for the next maintenance.