How to Clear the Maintenance Display on Changan CS75?

What is the fuel consumption of the Baojun RM-5?

The manual transmission 1.5T model has a fuel consumption of approximately 8.0 liters per 100 kilometers, while the automatic transmission 1.5T model consumes about 8.5 liters per 100 kilometers. The 1.5L automatic transmission model has a fuel consumption of around 7.5 liters per 100 kilometers, and the manual transmission 1.5L model consumes about 7.7 liters per 100 kilometers. Here are the detailed specifications: 1. The Baojun RM5 is an MPV model under the Baojun brand, equipped with two types of engines: a 1.5-liter turbocharged engine and a 1.5-liter naturally aspirated engine. 2. The 1.5-liter naturally aspirated engine delivers 99 horsepower and a maximum torque of 143 Nm. This engine reaches its maximum power at 5,800 rpm and its maximum torque between 3,400 and 4,400 rpm. It features multi-point fuel injection technology and uses an aluminum cylinder head with a cast iron cylinder block. It is paired with either a 6-speed manual transmission or a CVT. 3. The 1.5-liter turbocharged engine produces 147 horsepower and a maximum torque of 250 Nm. This engine achieves its maximum power at 5,200 rpm and its maximum torque between 2,200 and 3,400 rpm.

20

1

Share

When is the right time to change car engine oil?

According to the type of engine oil, the replacement intervals vary. Generally, mineral oil needs to be replaced every 5,000 kilometers; semi-synthetic oil should be changed approximately every 8,000 kilometers or 8 months; while full-synthetic oil requires replacement around every 10,000 kilometers or one year. Below are the key functions of engine oil: 1. Lubrication: Maintains viscosity between cylinders and pistons for proper operation, reduces friction between components, and minimizes wear. 2. Cooling: Assists the cooling system in lowering the internal temperature of the engine to some extent. 3. Cleaning: Removes sludge, carbon deposits, and other impurities attached to engine parts, keeping the environment clean. 4. Sealing: Seals gases within the engine pistons and piston rings, reducing the entry of external contaminants.

12

0

Share

How to Handle Vehicle Inspection Overdue?

Generally, if the inspection is overdue for less than three months, the owner can proactively go for the annual inspection, and at most, an oral warning will be given; if it exceeds three months, a fine needs to be paid, and 3 points will be deducted. Below are the methods to handle vehicle inspection overdue: 1. For vehicles in good technical condition, the owner should go to the local vehicle management office, where they will receive a "Motor Vehicle Deferred Scrapping Application Form." After filling out this form as required, the relevant personnel will complete the re-inspection procedures. 2. Depending on the number of seats, the re-inspection procedures also vary. For commercial passenger vehicles with nine or more seats, within a five-year period, the approval must be deferred to the municipal vehicle management office; for personal motor vehicles, the owner needs to bring a copy of their ID card, the original vehicle license, a copy of the compulsory traffic insurance, and, of course, the vehicle itself. For annual inspections of company-owned motor vehicles, the required documents include the organization code certificate (with a red seal), a power of attorney (with a red seal), the original vehicle license, a copy of the compulsory traffic insurance, a copy of the agent's ID card, and the vehicle.

17

5

Share

How to Turn Off the Daytime Running Lights That Stay On?

With the engine off and power disconnected, turn on the left turn signal, pull the light lever inward while keeping the left turn signal position, then turn the key to power on. After about 3 seconds, you will hear a "ding" sound, and the daytime running lights will turn off. Below is relevant information about daytime running lights: 1. Daytime running lights are daytime driving signal lights installed at the front of the vehicle, abbreviated as LED DRLs. Since they use LED light sources and are turned on during the day for daytime driving, they are called LED daytime running lights. Their main purpose is not to help the driver see the road but to enhance the vehicle's visibility in poor daytime driving conditions, allowing pedestrians, vehicles, and other vehicles to notice and recognize each other earlier and better, thereby preventing accidents in advance and ensuring driving safety. 2. When the car engine starts, the daytime running lights automatically turn on and gradually increase in brightness to attract the attention of other motor vehicles, non-motor vehicles, and pedestrians on the road. When night falls and the driver manually turns on the low beam headlights, the daytime running lights automatically turn off.

17

1

Share

How to Adjust When the Audi Q5 Speedometer Disappears?

First, press the one-touch start button to ignite the vehicle's engine, then click the knob on the left side of the multifunction steering wheel. Next, sequentially press the buttons on the right side of the multifunction steering wheel. Observe the multifunction steering wheel until the speed display changes to a digital speed reading. Below is some relevant information: 1. Roads in China have maximum speed limits, which are set based on accident statistics and road conditions to prevent speeding and reckless overtaking. The speedometer is an application used to monitor driving speed, supporting both miles per hour and kilometers per hour. This type of speedometer is simple and practical, widely used in vehicles of all sizes. 2. However, with advancements in electronic technology, many car dashboards now use electronic speedometers. A common type retrieves signals from the speed sensor on the transmission, causing the pointer to deflect or display digits based on changes in pulse frequency.

7

4

Share

What does the wrench symbol on the car mean?

The wrench symbol is a maintenance reminder indicator for the vehicle, indicating that the car is approaching or has exceeded the recommended maintenance mileage. It is advisable to visit a 4S shop for maintenance as soon as possible. After maintenance is completed, the 4S shop or repair shop will reset the maintenance light to zero; otherwise, the indicator light will remain on even after maintenance. Different car models from various manufacturers have different maintenance intervals, which should be confirmed in the vehicle's user manual. There are two ways to display maintenance reminders, as follows: 1. After the vehicle is serviced at a 4S shop or repair shop, a semi-transparent maintenance reminder sticker is placed in an inconspicuous area of the car, showing the next maintenance mileage and time, whichever comes first. 2. The vehicle has a built-in maintenance reminder system. After maintenance, you can manually set the mileage and time, and the maintenance reminder will appear on the dashboard when the set values are reached. Vehicles with an onboard computer will display text, while those without may only show a small wrench symbol.

5

Share

How to Clear the Maintenance Display on Changan CS75?

What is the fuel consumption of the Baojun RM-5?

When is the right time to change car engine oil?

How to Handle Vehicle Inspection Overdue?

How to Turn Off the Daytime Running Lights That Stay On?

How to Adjust When the Audi Q5 Speedometer Disappears?

What does the wrench symbol on the car mean?

Is a major maintenance required at 30,000 kilometers?

What to Do When a Motorcycle Registration Certificate Expires?

How often should the transmission fluid in an automatic car be changed?

How to Identify if the Production Date of a Tire Has Been Altered?