How to Clear the Adaptive Headlight Malfunction Indicator Light on Volkswagen Vehicles?

2 Answers
DiOwen
07/24/25 6:35pm
To clear the adaptive headlight malfunction indicator light on Volkswagen vehicles: If neither the headlights nor the controller are faulty, clearing this fault requires visiting a 4S dealership to replace the steering-linked controller. After replacement, the adaptive headlight malfunction indicator light can be eliminated. Car headlights, also known as automotive headlamps, ensure safe driving in all weather conditions, making it essential to pay attention to their use and maintenance. There are several types of automotive headlamps, including gas lamps, incandescent lamps, halogen lamps, and xenon lamps. Xenon lamps offer twice the illumination effect of halogen lamps.
Was this review help?
16
0
Share
EverettFitz
08/11/25 10:18am
When the adaptive headlight malfunction light comes on in your Volkswagen, don’t panic—start with the basics. Try parking the car, turning it off for a few minutes, and restarting to see if the light goes away. If it stays on, check the battery connections and the fuse box—in Volkswagen models, the fuses are usually located in the storage compartment under the steering wheel. If everything seems fine, borrow an OBD scanner from a friend, plug it into the car’s port to read and clear the fault codes. Sometimes, it’s just a temporary glitch. If the light comes back after clearing, it’s likely a sensor issue, such as the light sensor near the wipers—in that case, it’s best to take the car to a professional shop. During regular maintenance, make sure to clean the headlight components to prevent dust buildup and recurring issues. Stay calm and troubleshoot step by step.
Was this review help?
18
2
Share
Expand All
More Forum Discussions

How to Shift to Neutral in a Passat When the Battery is Dead?

To shift an automatic transmission to neutral when the battery is dead, you only need a paperclip and the car key. First, locate a small plug near the gear shift lever marked with the word "SHIFT". Then, use the paperclip to pry open the plug by inserting it into the gap around the plug. After that, you can remove the plug. Next, insert the car key into the small hole, or you can use any other long, thin object. Finally, you can shift the gear lever to the N (Neutral) position.
3
2
Share

Where is the camshaft position sensor located on the Wuling Hongguang?

Wuling Hongguang's camshaft position sensor is located at the rear of the cylinder head, near the end of the camshaft. Taking the 2020 Wuling Hongguang model as an example, its body dimensions are: length 4390mm, width 1660mm, height 1750mm, with a wheelbase of 2720mm and a fuel tank capacity of 50 liters. The 2020 Wuling Hongguang is equipped with a 1.2L naturally aspirated engine, delivering a maximum power of 56 kW and a maximum torque of 110 N·m, paired with a 5-speed manual transmission. It features a MacPherson strut independent front suspension and a leaf spring non-independent rear suspension.
7
3
Share

How to Set Up Auto-Folding Mirrors When Locking the Passat?

You can use the seat and mirror memory function on the door panel to record the most suitable position. Simply adjust the folding knob on the driver's side door panel. Power-folding mirrors refer to the ability to retract both side mirrors when needed via a button inside the car. They can be folded from inside the vehicle. Additionally, on models equipped with memory function, the passenger-side exterior mirror also features a tilt function. To improve visibility of the curb during reverse parking, the mirror surface will tilt downward.
15
3
Share

What is the range of the Leopaard CS9 new energy vehicle in kilometers?

The range of the Leopaard CS9 new energy vehicle is approximately 360 kilometers. The Leopaard CS9 is a compact SUV under the Leopaard brand. Taking the 2018 Leopaard CS9 Manual Jingfeng model as an example, its body dimensions are: length 4315 mm, width 1840 mm, height 1650 mm, with a wheelbase of 2600 mm. The 2018 Leopaard CS9 Manual Jingfeng model is equipped with a 1.5T turbocharged engine, delivering a maximum power of 110 kW at 5500 rpm, and a maximum torque of 210 Nm between 2000 to 4500 rpm. It features a MacPherson independent front suspension and a torsion beam non-independent rear suspension.
17
4
Share

How to Remove the Wiper Blades on a Volkswagen Lavida?

Method to remove the wiper blades on a Volkswagen Lavida: 1. After turning off the vehicle, do not remove the key immediately. Within 3 seconds, pull the wiper control lever inward, and the wipers will move to the maintenance position; 2. Gently pull the wiper blade toward the front of the car until it firmly locks into place; 3. Press the silver button on the wiper arm, hold the wiper blade with your hand, and pull it outward with slight force to remove the old rubber strip. The Volkswagen Lavida is a compact car produced by SAIC Volkswagen, with dimensions of 4670mm in length, 1806mm in width, and 1474mm in height, and a wheelbase of 2688mm. In terms of suspension, the front suspension of this car uses a MacPherson strut independent suspension, while the rear suspension employs a torsion beam non-independent suspension.
8
4
Share

How to Open the Front Hood of Great Wall Haval H6?

The method to open the front hood of the Great Wall Haval H6 is: pull the switch located at the lower left side of the driver's compartment outward to release it. The Great Wall Haval H6 is a compact SUV produced by Great Wall Motors, with body dimensions of: length 4653 mm, width 1886 mm, height 1730 mm, and a wheelbase of 2738 mm. The Haval H6 is equipped with a 2.0T direct-injection turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 155 kW and a maximum torque of 325 Nm. Its front suspension type is MacPherson independent suspension, and the rear suspension type is multi-link independent suspension.
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.