How to Clear Bluetooth on the 10th Generation Accord?

What is the Driving Stick?

Here is an introduction about the driving stick: Display average fuel consumption: When the small black stick on the dashboard is pressed, the small LCD screen on the dashboard will show L/100km, which is the vehicle's average fuel consumption. After resetting to zero, it records the fuel consumption generated during driving. After each refueling, you can press this driving stick to record the average fuel consumption after refueling, eliminating the need for manual recording. Display average speed: When the driving stick is pressed once, it usually shows the vehicle's average fuel consumption, but when pressed again, it switches to display the vehicle's average speed. The real-time speed of the vehicle can generally be displayed through the speedometer to determine if you are speeding. This function is mainly used in interval tests to record your average speed and avoid speeding. Display remaining range: If the driving stick is pressed a third time, the information on the dashboard will switch to display "remaining range," allowing the vehicle system to accurately determine the remaining fuel and how much distance can be covered.

13

2

Share

What Are the Hazards of Pure Electric Vehicles Encountering Water Accumulation?

The following are the hazards of pure electric vehicles encountering water accumulation: Being trapped in the vehicle: The biggest problem for electric vehicles encountering storms and water accumulation is not the issue of electric leakage, but the greatest possibility is that the interior gets soaked, or the driver gets trapped inside the vehicle and cannot get out. Additionally, although the vehicle's battery pack outputs high-voltage direct current of 300 to 600V, current electric vehicles are generally equipped with insulation and electric leakage detection functions. If high-voltage components experience leakage, the management system will directly cut off the voltage output from the battery box. Therefore, the possibility of being 'electrocuted' is relatively small. Component damage: Electric vehicles do not have intake components and all electrical parts are waterproofed. However, land vehicles still need to avoid wading through water because the vehicle frame cannot be completely sealed. Vehicle frames generally have some hollow components with openings, which can accumulate water. After water accumulation, it can corrode the steel. Moreover, the composition of water accumulation on ordinary roads is relatively complex, which may have a corrosive effect on waterproof components, or sand and other hard particles in the water may enter moving parts and scratch them.

1

Share

What is the difference between adding a D license and taking the test directly?

The difference between adding a license and initial learning is that some subject items can be reduced. The difference between adding a B2 license with a C1 license and taking the test directly is that the start dates are different. The initial issuance date and the effective start date of the B2 driver's license are the same day. If it is an added license, the initial issuance date and the effective start date will not be the same day. The probation restrictions are different. After successfully adding a B2 license with a C1 license, driving a minibus during the probation period is not restricted by the probation period. A directly applied B2 license is subject to probation restrictions for any vehicle. The scoring cycle is different. Adding a B2 license requires meeting the condition of no 12-point record in the previous scoring cycle and the current scoring cycle, while directly applying for a B2 license does not have this restriction. The application age is different. The minimum age to apply for a C1 test is 18 years old, while the minimum age to apply for a B2 test is 21 years old. B2 requires the applicant to be at least 21 years old. The fees for adding a license and initial learning are the same. It takes at least three years to add a B2 license with a C1 license.

15

2

Share

Does Using Air Conditioning Increase Fuel Consumption?

Using air conditioning does increase fuel consumption. Here are the details: Introduction to Car Air Conditioning: Car air conditioning is an air conditioning device installed in vehicles, capable of cooling, heating, ventilating, and purifying the air inside the cabin. It provides a comfortable environment for passengers, reduces driver fatigue, and enhances driving safety. Reason for Increased Fuel Consumption: Using air conditioning while driving consumes fuel because the car air conditioning system utilizes a portion of the engine's power. As a result, fuel consumption increases, though the exact amount depends on the vehicle's displacement and speed. When drivers turn on the air conditioning, some vehicles with small displacements may experience noticeable power loss. However, it is important not to press the accelerator pedal abruptly; instead, gradually increase the throttle to avoid further increasing fuel consumption.

5

Share

What Does Autonomous Lane Changing Mean?

Autonomous lane changing refers to the driver selecting an appropriate lane to change into and choosing the most reasonable lane for driving. Below are the specific details: Lane Changing Method: Pay close attention when changing lanes and turning, never turn or change lanes arbitrarily. Before turning, always observe the situation in the rearview mirror in advance, and try to understand the conditions on both sides and behind the vehicle as much as possible. Do not turn arbitrarily before clearly seeing the rearview mirror. Precautions: Turn on the turn signal and honk the horn in advance when turning or changing lanes, try to move to the side as early as possible, and turn smoothly. Always slow down in advance before entering or exiting non-motorized lanes and give way to vehicles and pedestrians going straight on the side. Careful Observation: When exiting a gate or turning from a small road onto a main road, slow down and wait, always observing the road conditions on both sides clearly first.

2

4

Share

What is the tire pressure for the UY125?

The tire pressure for the UY125 is 1.8 in the front and 2.3 in the rear. Here are the details: Tire pressure: Tire pressure is an indicator of a motorcycle's load capacity. The load capacity of a motorcycle depends on the tire pressure. This relationship is based on the tire's load index, tire pressure, and load capacity. Factors affecting tire pressure: The higher the tire pressure, the greater the load capacity; the lower the pressure, the smaller the load capacity. For example, a tire with a load index of 80 has a load capacity of 300 kg at 0.15 MPa, but this increases to 450 kg at 0.25 MPa. This shows how significantly tire pressure affects a motorcycle's load capacity. Both excessively high and low tire pressure can shorten the tire's lifespan.

9

2

Share

How to Clear Bluetooth on the 10th Generation Accord?

What is the Driving Stick?

What Are the Hazards of Pure Electric Vehicles Encountering Water Accumulation?

What is the difference between adding a D license and taking the test directly?

Does Using Air Conditioning Increase Fuel Consumption?

What Does Autonomous Lane Changing Mean?

What is the tire pressure for the UY125?

Should I go to a 4S shop or a repair shop for new car scratches?

Can You Drive with Only a Driver's License and No Vehicle License?

Symptoms of Motorcycle Clutch Wear

Is it permissible to reverse when there's insufficient space for a U-turn at an intersection?