How to Clean the Urea Nozzle?

1 Answers
OBella
07/29/25 6:06pm
Urea nozzle cleaning method: Use a small ultrasonic cleaner for cleaning. The following are the symptoms of a clogged urea nozzle: Insufficient vehicle power: While driving, the engine lacks power, giving the driver a feeling of overall weakness in the vehicle. Urea pump not working: During vehicle operation, the urea pump fails to function properly. Urea light stays on: While the vehicle is running, the urea fault indicator light on the dashboard remains illuminated. High urea consumption: The urea consumption value exceeds the standard of 10L urea per 100L diesel consumed. Nozzle not working: When the post-processing system is operating, the nozzle does not spray urea, leading to prolonged blockage and crystallization at the nozzle.
Was this review help?
17
4
Share
More Forum Discussions

Can You Drive with Low Engine Temperature?

It is not advisable to drive when the engine temperature is low. Here are the specific details: 1. After a car has been parked for an extended period, the engine oil inside has mostly drained back into the oil pan, and the oil film on the surfaces of the friction pairs in the engine is largely destroyed. At the moment of startup, friction generates relative motion, but the oil pump has not yet delivered oil to the friction surfaces in time. This results in dry friction on the surfaces of the friction pairs, causing the greatest wear on the engine during the cold start phase. 2. Since low engine temperature increases engine wear, there should be a warm-up process after a cold start. After starting the vehicle, allow the engine to idle at a higher speed automatically. Wait until the idle speed drops to the normal range (around 800 rpm) before driving. Until the engine temperature reaches the normal range, avoid exceeding 2,500 rpm, keep the engine load under 30%, and refrain from aggressive driving behaviors such as rapid acceleration or hard braking. 3. Only after the engine temperature reaches the normal range (80°C-90°C) should you drive normally.
11
2
Share

How Often Does the Panamera Undergo a Major Redesign?

The Panamera undergoes a major redesign every 10 years. Introduction to the Panamera: The Panamera is the Chinese translation of Porsche's Panamera, a 4-door, 5-seater luxury coupe from Porsche. This high-performance luxury coupe boasts rapid acceleration, with the top model accelerating from 0 to 100 km/h in 3.8 seconds and a top speed nearing 310 km/h. The mid-range models vary in acceleration, achieving 0-100 km/h in 4.2 to 5.4 seconds, rivaling supercars. Exterior of the Panamera: The Porsche Panamera features smooth and flowing body lines with no sharp angles, exuding a muscular look that reflects Porsche's mature design style. It adopts a four-door design, with large air intakes on each side of the front fascia, intersected by horizontal fog lights, creating a unique appearance. The side profile is treated with clean and soft lines, blending elegance and dynamism. The massive five-spoke wheels are paired with striking yellow brake calipers, hinting at its impressive sports potential.
13
4
Share

What is the weight of a Jetta car?

The curb weight of the Jetta reaches 1105 kilograms. Introduction to Jetta: Jetta is an automobile brand under FAW-Volkswagen Automotive Co., Ltd., a joint venture of the German Volkswagen Group in China. Its first product, the Jetta (Jetta-MK1), was launched in Europe in 1979. Structurally, the Jetta (including the later Vento/Bora) is essentially a Golf with a trunk added, making the Jetta a derivative of the Golf. Jetta Brand Introduction: All models under the Jetta brand adopt the same technical standards and product development capabilities as Volkswagen vehicles, while offering more affordable prices, giving Jetta models high cost-performance ratios. The new Jetta brand's various models feature a family-style front fascia design, with the sedan models inheriting the classic appearance of the Volkswagen Jetta. The entire brand perfectly inherits German engineering and Volkswagen quality. Among them, the Jetta VS7 is developed on Volkswagen's advanced MQB platform, and its globally shared leading production processes ensure it maintains excellent quality, meeting owners' needs in terms of safety, space, and technological configurations.
6
3
Share

At what mileage is a car generally scrapped?

There is no age limit for car scrappage, but the mileage limit for scrappage is 600,000 kilometers. The following are the specific steps for delaying car scrappage: 1. The registration and review department of the vehicle management office reviews the relevant information of the motor vehicle, including: the original "Application and Approval Form for Delayed Scrappage of Motor Vehicles" (if not conducted simultaneously with regular inspections, the engine number and vehicle identification number, i.e., the chassis or body number, must be affixed on the back); the original "Motor Vehicle Driving License". 2. The motor vehicle inspection department verifies the vehicle identification code (chassis or body number) and engine number, and checks for any signs of tampering; compares the imprinted numbers with the original vehicle identification code (chassis or body number) and engine number; tests the safety technical performance of the motor vehicle and reviews its safety technical performance. 3. The business leadership department of the vehicle management office reviews the application. If it meets the regulations, they will note their opinion on the original application form and, in the record column of the supplementary page of the "Motor Vehicle Driving License", use a computer to print the approved period for delayed scrappage and the inspection cycle in the format of the special seal for delayed scrappage.
16
3
Share

Does Overfilling Volkswagen Antifreeze Have Any Impact?

Overfilling antifreeze does not have any significant impact. The excess antifreeze will expand due to heat during vehicle operation and overflow through the pressure relief valve, which is harmless except for leaving some stains. However, it is advisable to use a syringe to remove the antifreeze that exceeds the maximum level. Typically, the antifreeze reservoir has MAX (maximum level) and MIN (minimum level) markings. The antifreeze should be filled between the MAX and MIN levels. Antifreeze is a coolant containing special additives, primarily used in liquid-cooled engine cooling systems. It offers excellent performance in preventing freezing in winter, boiling in summer, and resisting scale and corrosion throughout the year. How to determine if antifreeze is low: Observe the antifreeze warning light on the dashboard. If it lights up, it is likely due to low antifreeze levels, although it could also be caused by excessive engine temperature. Check the antifreeze reservoir. If the level is below the MIN marking, do not continue driving and add antifreeze promptly. Check the level markings on the antifreeze reservoir. The normal antifreeze level should be between the MAX and MIN markings. If the antifreeze is below the MIN marking, it indicates a deficiency.
8
5
Share

Should You Release the Throttle When Using Paddle Shifters?

Should You Release the Throttle When Using Paddle Shifters? The detailed explanation of releasing the throttle during shifting is as follows: 1. When upshifting, release the throttle, depress the clutch, upshift, release the clutch, and press the throttle. When downshifting, release the throttle, depress the clutch, lightly apply the brakes, downshift, release the clutch, and apply throttle as needed. In all shifting operations, the throttle should be released. For manual transmission cars, shifting without releasing the throttle is significantly more difficult to perform. 2. When downshifting, release the throttle and lightly apply the brakes to control the vehicle speed within the range suitable for the target gear. Depress the clutch, engage the corresponding gear, and then gradually release the clutch. Downshifting is a deceleration process, but it doesn't mean completely ignoring the throttle pedal. After completing the shift and fully releasing the clutch pedal, you should immediately press the throttle pedal to achieve smooth power transfer. 3. It is possible to complete a shift while pressing the throttle pedal, but this will cause excessive wear on the clutch plates, which assist in the engagement and disengagement of the clutch. The release bearing will also endure greater impact, adversely affecting its service life.
20
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.