How to Clean the Radiator of Chery Tiggo 3?
3 Answers
There are several radiators in a car, with the water tank being one of them, along with the oil radiator, intercooler, and air conditioning radiator. The steps for automatic cleaning of the Tiggo 3 water tank without disassembly are as follows: 1. Ensure the engine is turned off and cooled. Open the water tank cap, slowly add the automatic water tank cleaner into the tank until the coolant reaches the normal level, then tighten the cap; 2. Start the engine and let the water temperature reach the normal operating temperature, then run the engine for approximately 140 hours as needed. If there is hard scale in the cooling system, extend the running time to 1048 hours; 3. Turn off the engine, drain the coolant containing the scale, and replace it with antifreeze or clean coolant.
Cleaning the radiator of the Chery Tiggo 3 is quite important. The main steps are to wait until the engine is completely cooled before starting to prevent burns. After opening the front cover, first use a soft brush to remove dust and debris between the fins—avoid using excessive force to prevent damaging the radiator fins. Then, gently rinse with water, avoiding high-pressure water jets to prevent clogging the internal channels. Also, check the coolant level; if it's too dirty, you can drain the old fluid, clean the internal tank, and refill it with new vehicle-specific coolant for better cooling efficiency. Older cars tend to accumulate dust over time, so it's recommended to clean the radiator every six months, especially in dusty areas or if the car is driven frequently, to prevent overheating issues. Regularly inspect hoses for cracks—don’t wait for the car to alert you before addressing issues—to save on maintenance costs and keep the car in stable, worry-free condition.
Safety first when cleaning the radiator. Do not touch it when the engine is hot, as it may release steam and cause burns. Wait until the vehicle has completely cooled down before proceeding. Remove the radiator cap carefully, handling it gently to avoid cracking. When rinsing the exterior, use low-pressure water flow and avoid strong jets to prevent damage to the thin fins. Check the hose connections for signs of aging or leaks—replace them if serious issues are found. When replacing coolant, drain the old fluid, flush the internal system, and refill with new coolant to maintain stable pressure. Proper cleaning helps prevent overheating accidents. Wear gloves and goggles for safe operation. If uncertain, consult a professional shop instead of forcing it. Regular inspections of vehicle details extend lifespan and save on repair costs.
