How to Clean the Air Conditioner Evaporator of a New Bora?

2 Answers
Catalina
07/28/25 9:26pm
Use a weak alkaline aqueous solution combined with a soft brush for cleaning. Below are relevant introductions about car air conditioner maintenance: 1. Regularly Replace the Filter: Pay attention to the cleaning of the air conditioner and regularly replace the air conditioner filter. 2. Maintenance of the Car Air Conditioner Liquid Storage Tank: The liquid storage tank should be replaced in time after two years of normal use. Each time the pipeline is disassembled for repair or cleaning, a new liquid storage tank needs to be replaced. 3. Regularly Check the Refrigerant and Refrigeration Oil: Because the refrigerant currently used in cars has strong permeability, even a well-functioning refrigeration system may experience insufficient refrigerant due to long-term use, leading to poor refrigeration performance.
Was this review help?
1
4
Share
JaxsonMarie
08/12/25 2:05am
I cleaned the air conditioning evaporator of my new Bora myself. I needed to prepare an air conditioning cleaning kit and a screwdriver. First, I removed the glove compartment on the passenger side, took out the old air filter, and then I could see the evaporator. I inserted the cleaning agent's hose into the air filter opening, about 15 centimeters away from the evaporator, and evenly sprayed half a bottle of the cleaning agent. After spraying, I let it sit for ten minutes to allow the foam to dissolve the dirt, then turned on the air conditioning's external circulation at maximum fan speed for twenty minutes. Finally, I installed the new filter. Throughout the process, I made sure not to let any liquid flow into the blower's circuit board. After cleaning, I noticed a significant reduction in odors from the air conditioner, and it cooled much faster. Remember to clean the evaporator every two years, and it's best to do it before using the air conditioner in the summer.
Was this review help?
9
2
Share
Expand All
More Forum Discussions

Where to Add Windshield Washer Fluid for Haval H6?

Haval H6's windshield washer fluid reservoir is located at the left edge of the engine compartment. Global models use a unified symbol for identification, and the washer fluid tank is no exception. Below are the steps for adding windshield washer fluid: 1. Type: In northern regions, choose antifreeze washer fluid to prevent pipeline cracks when winter arrives before the fluid is used up; in southern regions, select washer fluid with added insect-cleaning compound. 2. Dilution: Mix water and washer fluid at a 1:1 ratio. The car's washer fluid capacity is approximately 1.5L, so choose a container between 1.25L-1.5L for dilution. 3. Adding: There is a tank on the left side of the engine compartment with a fountain pattern on its cap. Lift the cap and pour in the mixture, ensuring it does not exceed the MAX mark.
13
4
Share

What brand of tires does the Honda Civic use?

Since the 2016 model year, the Honda Civic has been equipped with Yokohama tires as original equipment. Below are relevant details: 1. Tire specifications: The tread pattern is V551V, with sizes of 215/55R16 93H and 215/50R17 91V. 2. Functions of tires: Tires are one of the most critical components of a vehicle, serving several key purposes: supporting the entire weight of the vehicle, bearing the car's load, and transmitting forces and moments in other directions; transferring traction and braking torque to ensure good adhesion between the wheels and the road surface, thereby enhancing the vehicle's acceleration, braking, and off-road capabilities.
2
2
Share

Where is the production location of Great Wall Haval?

Great Wall Haval is produced in Baoding City, Hebei Province. Haval is an automobile brand established by Great Wall Motors on March 29, 2013, primarily manufacturing models such as M1, M2, M4, H1, H2, H3, H4, H5, H6, H7, H8, and H9. Below is additional information about the Haval H6: 1. The Haval H6 incorporates fashionable, intelligent, and luxurious urban design elements, featuring a stylish and grand exterior, cozy interior, and intelligent equipment throughout the vehicle. 2. It boasts four major highlights: intelligent luxury, intelligent space, intelligent technology, and intelligent safety. 3. The vehicle offers excellent driving control, comfort, and comprehensive safety protection. 4. The Haval H6 is equipped with Mitsubishi's 2.0L gasoline engine and Green Power 2.0T diesel engine, available in three versions: Urban, Elite, and Premium.
18
4
Share

Where is the fuse for the Trumpchi GS4 horn located?

The fuse for the Trumpchi GS4 horn is located in the fuse box, which is inside the engine compartment. You can find the fuse box by opening the engine compartment. Here is some relevant information: There are many circuits in a car, and fuses serve to protect these circuits. When the circuit temperature is too high or the current is too large, the fuse will melt to protect the circuit. The car's fuse box contains many fuses and relays. When a fuse blows, certain functions of the car may be affected. In such cases, the fuse needs to be replaced with a new one. Generally, a car has two fuse boxes: one in the engine compartment and another inside the cabin: 1. The fuse box located in the engine compartment is responsible for the normal operation of external vehicle electrical components, such as headlights, horns, the engine control unit (ECU), the air conditioning compressor, and the windshield washer motor, ensuring their circuit safety. 2. The other fuse box is located on the left side of the steering wheel or inside the glove compartment, responsible for the normal operation of internal electrical components, such as power windows, the cigarette lighter, power seats, and airbags.
14
2
Share

How to Reset the Maintenance Reminder Light on Chery Vehicles?

The method to reset the maintenance reminder light on Chery vehicles is as follows: 1. Turn on the ignition switch and use the instrument mode adjustment button to switch the display to the instantaneous fuel consumption state. 2. Turn off the ignition switch, hold down the right mode switch, then turn on the ignition switch, and release the right mode switch. 3. Within 30 seconds, simultaneously press both buttons on the instrument panel—the mode switch and the clock switch—to clear the maintenance light. Below is some related information: The original purpose of the maintenance light is to remind the vehicle owner to perform maintenance as soon as possible. Therefore, the owner should promptly visit a 4S shop for maintenance. After the maintenance is completed, the 4S shop will use a diagnostic tool to reset the maintenance light. The quickest and most accurate way to reset the maintenance reminder light is by using a diagnostic tool. Most vehicle owners do not have such equipment, so it is recommended to reset the light at a 4S shop after maintenance or visit an external 4S shop for resetting.
17
0
Share

What is the detailed structure of a turbocharger?

Detailed structure of a turbocharger: 1. Composition: A waste gas turbocharger mainly consists of an impeller and a turbine, along with some other control components. The impeller and turbine are connected by a shaft. The exhaust gas from the engine drives the impeller, which in turn rotates the turbine. The rotating turbine then pressurizes the intake system. 2. Installation: The turbocharger is installed on the exhaust side of the engine, so it operates at very high temperatures. Additionally, the rotor speed of the turbocharger during operation is extremely high, reaching up to hundreds of thousands of revolutions per minute. Such high speeds and temperatures make common mechanical needle or ball bearings unsuitable for the rotor. Therefore, turbochargers generally use full-floating bearings, lubricated by engine oil, and are cooled by coolant.
16
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.