How to Clean Car Windows More Effectively?

1 Answers
OMolly
07/29/25 8:41pm
Here are several methods to clean car windows more effectively: 1. Method One: Add neutral detergent to water, then soak a chamois or imitation chamois in the solution. After scrubbing, the windows will be noticeably cleaner. This method is simple, practical, and convenient. 2. Method Two: Mix a small amount of detergent with white vinegar in clean water and use it to wipe the car windows. This not only cleans effectively but also helps prevent fogging. 3. Method Three: Use ammonia water for cleaning by adding a small amount to water. This can make the car windows shine. 4. Method Four: Evenly spray an anti-fog cleaner on the car windows, then dry them with a clean cloth. Finally, rinse with a high-pressure car wash gun for a clean and transparent finish.
Was this review help?
8
1
Share
More Forum Discussions

Does the new Cayenne use the EA888 engine?

The new Cayenne is equipped with the EA888-2.0T engine. The EA888 series engines include two displacements: 1.8L and 2.0L. The 1.8TSI has a maximum power of 118kW (160PS) at 5000-6200rpm and a maximum torque of 250Nm at 1500-4500rpm. The 2.0TSI can reach a maximum power of 147kW (200PS) at 5100-6000rpm and a maximum torque of 280Nm at 1700-5000rpm. The EA888 engine is the main engine for mid-to-high-end models under the Volkswagen Group, including 1.8L and 2.0L displacements. It integrates technologies such as direct fuel injection, turbocharging, and variable valve timing. With ample low-speed torque, excellent fuel economy, and top-tier reliability, it is installed in various models under the Volkswagen Group, including the Magotan, CC, Tiguan, Passat, and Audi Q5. The working principle of the EA888 engine mainly involves controlling the hydraulic oil in the corresponding pipelines through the camshaft adjustment valve to drive the vanes in the adjuster, thereby rotating the camshaft to advance or delay the opening and closing of the valves, with an adjustable range of up to 60 degrees of crankshaft angle.
12
5
Share

What Causes the Front Windshield to Become Blurry?

Front windshield blurriness occurs due to a temperature difference between the inside and outside of the vehicle, leading to fogging, which makes it appear blurry. This situation can be resolved by turning on the air conditioning and directing cold air at the windshield, which will clear the fog in 3-5 seconds. Below are the functions of a car's air conditioning system: 1. Temperature Regulation: This is the primary function of car air conditioning. In summer, the cooling system produces cold air to lower the cabin temperature; in winter, except for large commercial vehicles that use independent combustion heaters, most vehicles utilize residual heat for warming. 2. Humidity Regulation: Humidity significantly affects passenger comfort. Cabin humidity should generally be maintained between 30% and 70%. Standard car air conditioning systems do not regulate humidity; only ventilation systems or advanced luxury vehicles with integrated heating and cooling systems can adjust humidity. 3. Airflow Regulation: The speed and direction of airflow greatly impact comfort. If air is blown directly, the speed should be limited within a certain range when the temperature is appropriate. The airflow speed can be adjusted based on passengers' living environments, age, health conditions, and temperature preferences. 4. Air Purification: Cabin air quality is crucial for ensuring comfort.
20
1
Share

What to Do When the Car Windshield is Damaged by Small Stones?

Resin can be used for repair, but it depends on the specific situation. If there are no extending cracks, and the damage points are few and small, it can be repaired. If the damage is not in the main line of sight, has extending cracks, and the extension is within 5mm, the owner should go to a professional maintenance shop for windshield repair as soon as possible. Below is an introduction to car glass crack repair: 1. Repair with professional tools: Short cracks in car glass are generally repaired using specialized repair tools and repair fluid. The repair fluid is filled into the cracks through the repair tools, solidifying to eliminate the gaps, thereby achieving the purpose of repair. It should be noted that if cracks appear on the glass, those that can be repaired should be repaired as soon as possible, and those that need to be replaced should be replaced in time. Because during driving, the windshield needs to withstand wind resistance and constant vibration. Over time, small cracks will slowly extend, the cracks will gradually lengthen, and the area will increase. At this time, glass that could have been repaired may only be replaceable. 2. Long cracks suggest replacing the glass: Long cracks in car glass are difficult to repair. After all, the effect of repairing large cracks is not good, leaving obvious marks, and the strength of the repaired windshield cannot be guaranteed. There may be a risk of re-cracking, posing certain safety hazards, so it is recommended to replace the glass. In addition, the cost of replacing the glass is relatively expensive. If you have insurance, it is recommended to go through the insurance.
19
5
Share

What Precautions Should Be Taken When Driving at Night?

When driving at night, it is important to inspect the vehicle before setting off, maintain a safe distance, and use high and low beams appropriately. Here are the detailed explanations: Inspect the Vehicle Before Driving: Before driving at night, conduct a comprehensive check of the vehicle's lights, engine oil, coolant, tire pressure, etc., to avoid malfunctions during the journey. Maintain a Safe Distance: Since a driver's vision and reaction time are somewhat impaired at night, maintaining a safe distance ensures sufficient braking distance. Use High and Low Beams Appropriately: On roads without a median barrier, using high beams for oncoming traffic can impair your own visibility. Therefore, when encountering oncoming vehicles on such roads, switch to low beams to avoid being blinded by the lights of the opposing vehicle.
9
5
Share

Is Wheel Alignment Free at 4S Stores?

Some 4S stores offer it for free, while others charge a fee, depending on the specific situation. Below is a detailed explanation about wheel alignment at 4S stores: The Function of Wheel Alignment: Based on the four-wheel parameters of the vehicle, adjustments are made to ensure good driving performance and a certain level of reliability. It helps the car maintain stable straight-line driving and easy steering while reducing tire and steering component wear during driving. Data Adjusted During Wheel Alignment: Caster angle, kingpin inclination, camber (negative camber), and toe (toe-out). Among these, the caster angle ensures straight-line stability and steering return. The kingpin inclination enhances stability and steering return. Camber increases tire contact area and offsets adverse effects. Toe counteracts the negative effects caused by camber (or negative camber).
5
3
Share

What to Do When Your Vehicle Runs Out of Battery?

Push-starting. Below are detailed explanations about vehicle battery depletion: Signs of Battery Depletion: To prevent sudden battery failure, the best approach is to regularly pay attention to the "distress signals" your vehicle emits. There are three main indicators of insufficient battery power: first, the starter either doesn't turn or turns weakly, making it impossible to start the engine; second, the headlights are dimmer than usual; third, the horn sounds weak or doesn't sound at all. Methods to Prevent Battery Drain: To minimize battery consumption, avoid keeping the lights on for extended periods when the engine is off. Even if the engine is running, if the vehicle is parked for a long time, it's advisable to turn off the power to unnecessary electrical devices (such as interior and exterior lights, audio systems, navigation systems, etc.).
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.