How to Clean Car Interior More Thoroughly?

What is the displacement of the new X1?

The new X1 comes with two displacement options: a 1.5-liter engine and a 2.0-liter engine. The 1.5-liter turbocharged engine delivers 136 horsepower, while the 2.0-liter turbocharged engine produces 192 horsepower. Here is more information about the new X1: 1. The new X1 offers a total of five models with these displacements: the sDrive18Li Fashion/Elegance, sDrive20Li Premium, and xDrive20Li Elegance/Luxury. 2. Externally, the BMW has undergone minimal changes, with slight adjustments to the headlight assembly shape. The blackened kidney grille enhances its sporty appeal, and the slightly raised lines on the hood further emphasize the SUV's athletic DNA. The side profile has also been subtly modified for a more dynamic look. The entry-level model features 17-inch alloy wheels, while the flagship XDrive20Li comes with 18-inch wheels. With dimensions of 4565*1821*1624, the new X1 offers superior space compared to its peers, and its handling is among the best in its class. 3. The new BMW X1 has been upgraded in terms of technology and aesthetics, featuring key components such as a 2.0T engine, a four-wheel-drive system, and an 8.8-inch display. Inside, the 8.8-inch touchscreen LCD in the center console maintains the popular asymmetrical design, complemented by wood trim and chrome accents, elevating the luxurious feel of this premium vehicle.

15

1

Share

At how many kilometers should an Audi car undergo its first maintenance?

Audi cars' free first maintenance voucher is valid at 7,500 kilometers. The first maintenance items include: 1. Changing the engine oil, oil filter, fuel filter, and air filter; 2. Checking if the level of the car's coolant meets the specified requirements; 3. Checking the fluid levels of the brake and clutch; 4. Checking if the oil level in the power steering reservoir meets the specified requirements and inspecting all oil pipe interfaces in the system for leaks; 5. Checking the battery fluid level and the level of the windshield washer fluid; inspecting the tension and aging of the belts for the generator, air conditioning, water pump, and power steering pump; 6. Checking if all front and rear lights of the car are functioning (including headlights, width lights, turn signals, brake lights, reverse lights, and fog lights); 7. Checking the tire pressure and wear of the car's tires, tightening the tire bolts as specified, and inflating the tires to the manufacturer's recommended pressure, rotating the tires based on wear conditions; 8. Checking if the car's exhaust emissions meet the standards.

11

2

Share

Is Volkswagen's Auto Start-Stop Defaulted to Off?

Auto start-stop being defaulted to off is due to the car owner disabling the function in the vehicle settings. If you wish to continue using this feature, simply enable it in the vehicle settings. Auto start-stop can improve the fuel efficiency of the car and also reduce exhaust emissions. Below are some drawbacks of frequently switching the auto start-stop system on and off: 1. Higher maintenance costs for the battery and starter: Frequent engine starts and stops can cause damage to related components such as the starter and battery. 2. Poor user experience: The noise and vibration are significant when the auto start-stop system is activated. 3. Increased fuel consumption in traffic jams: During severe traffic congestion, the engine's downtime is prolonged, causing the combustion chamber temperature to drop. Unburned hydrocarbons and paraffin can form carbon deposits on the cylinder walls. If the fuel quality is poor, the situation can worsen. Carbon deposits can lead to higher fuel consumption and reduced power. Ironically, the auto start-stop feature, designed to reduce fuel consumption, may end up increasing it.

18

2

Share

How to Remove the Wiper Blades on a Sylphy?

First, remove the wiper rubber strip, unclip the fastener on top, then lift both wiper arms, paying attention to the sequence—larger one first, then the smaller one. Hold the front end of the wiper arm and push it downward horizontally to remove the wiper. Push it backward horizontally to fully detach the wiper. Below are the steps to replace the wiper blades on a Sylphy: 1. Fully raise the wiper arm. To avoid damaging the windshield during removal or installation, it is recommended to place a cloth on the windshield. Lift the wiper arm to adjust the blade angle; 2. Change the angle of the wiper blade, preferably to a 90-degree angle with the wiper arm. Since the wiper blade is secured to the arm with a clip, adjusting the angle facilitates removal and installation; 3. Once positioned at the correct angle, begin the removal process. Use one hand to lift the rubber blade to expose the fixing hook between the wiper arm and the blade. Remove the entire wiper blade assembly. With one hand, pry open the rubber blade sideways, while the other hand presses firmly downward on the main bracket to separate the wiper blade from the arm. The entire wiper blade can then be removed; 4. Lift the cover in the middle of the wiper strip, thread the wiper support through the middle, and clip it into the wiper's slot. Tighten it, and finally, replace the cover to complete the installation.

5

3

Share

How to Replace the Battery in an Audi Car Remote?

Audi car remote battery replacement steps are as follows: 1. Remove the mechanical key: Press the switch on the metal part at the back of the remote. While pressing the switch, pull the metal part outward to reveal and remove the hidden mechanical key. 2. Remove the battery module: After removing the mechanical key, you can see the internal structure of the original metal part. There are two clips on both the front and back sides. Press them simultaneously and pull outward to remove the battery module. 3. Replace the battery: After taking out the battery module, remove the old battery and replace it with a new one. 4. Reverse the operations described in the first and second steps to reassemble the remote. At this point, the battery replacement operation is complete.

6

4

Share

How to reset tire pressure on BMW 320?

The tire pressure reset button is located on the center console. Use the up and down selection buttons on the light switch to navigate to the tire pressure loss display icon, then briefly press the BC button (located on the left side of the light switch). Next, press and hold the BC button until a checkmark appears at the bottom of the instrument cluster. Drive at a constant speed for 3 kilometers to complete the initialization. The reset can only be performed when the ignition is in position 2 or during idle. Tire pressure should not be too high or too low. If the pressure is too high, the contact area between the tire and the ground decreases, increasing the pressure on the tire's contact patch and accelerating wear, though it may improve fuel efficiency. However, grip is reduced, especially during emergency braking, leading to longer stopping distances. If the pressure is too low, the contact area between the tire and the ground increases, resulting in higher friction and better grip, but it also increases fuel consumption. Additionally, severe sidewall deformation can reduce the tire's lifespan. Tire pressure is not a fixed value. In summer, when temperatures are high, the pressure should be slightly reduced, typically between 2.2—2.4 bar. In spring, at around 20°C, the pressure should generally be maintained between 2.3-2.5 bar.

15

1

Share

How to Clean Car Interior More Thoroughly?

What is the displacement of the new X1?

At how many kilometers should an Audi car undergo its first maintenance?

Is Volkswagen's Auto Start-Stop Defaulted to Off?

How to Remove the Wiper Blades on a Sylphy?

How to Replace the Battery in an Audi Car Remote?

How to reset tire pressure on BMW 320?

What causes the car dashboard to flash and the engine not to start?

What car has three bullet-shaped logos?

Is it better to use 92 or 95 octane gasoline for the Mazda3 Axela?

What does Toyota's TNGA architecture mean?