How to Clean Car Interior Glass?

2 Answers
CaliRose
07/25/25 4:37pm
Steps for cleaning car interior glass: 1. Prepare a microfiber cloth and car glass cleaner; 2. Spray the cleaner onto the glass; 3. Wipe the glass with the microfiber cloth; 4. After wiping, spray some warm water onto the car glass using a water bottle; 5. Use a clay bar to wipe the car glass once; 6. Spray the cleaner again and wipe with the microfiber cloth one more time. Car glass maintenance methods: 1. Use a soft car cleaning cloth to avoid damaging the glass when cleaning the car; 2. Clean with glass cleaner; 3. Apply window film in time to block sunlight and UV rays, preventing glass from cracking; 4. Replace the rubber seals regularly to prevent leaks due to aging.
Was this review help?
12
2
Share
SanAmelia
08/11/25 9:53pm
As a ride-hailing driver who frequently takes long-distance trips, I have to clean the windshield over a dozen times every day. Remember never to use dish soap on the interior glass—it leaves an oily film that makes it blurrier the more you wipe. I always keep dedicated glass cleaner in my car, paired with a microfiber cloth, and wipe in circular motions from left to right to avoid lint. The small corners above the dashboard are the trickiest; you have to roll the cloth around your finger and slowly twist it in. For sunscreen residue on the glass, spraying a bit of alcohol works best. After cleaning, don’t rush to open the door for ventilation—wait two minutes for it to dry completely before rolling down the windows, or else dust will stick right back on.
Was this review help?
1
1
Share
Expand All
More Forum Discussions

How often should the coolant be replaced in a Prado?

The coolant in a Prado should be replaced every 2 years. While evaporation loss of coolant is permissible, any deficiency observed during usage should be replenished with additional coolant. Taking the 2019 Prado as an example, its body dimensions are: length 4840mm, width 1885mm, height 1890mm, with a wheelbase of 2790mm and a fuel tank capacity of 87 liters. The 2019 Prado features a double-wishbone independent front suspension and a four-link non-independent rear suspension. It is equipped with a 3.5L naturally aspirated engine delivering a maximum horsepower of 280PS, peak power of 206kW, and maximum torque of 365Nm, paired with a 6-speed automatic transmission.
18
2
Share

How often should the timing chain be replaced on a Magotan?

The Magotan does not require replacement of the timing chain, as the timing chain is a replacement for the timing belt and has the same lifespan as the engine. Taking the 2020 Magotan as an example, its body dimensions are: length 4865mm, width 1832mm, height 1471mm, with a wheelbase of 2871mm, a fuel tank capacity of 66 liters, and a trunk capacity of 533 liters. The 2020 Magotan features a front MacPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 1.4L inline 4-cylinder turbocharged engine, delivering a maximum horsepower of 150PS, a maximum power of 110kW, and a maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.
7
0
Share

Does the Jetta have an anti-collision steel beam?

The Jetta has a front anti-collision steel beam but no rear anti-collision steel beam. The function of the anti-collision steel beam is to absorb the impact force in the event of a collision, protecting the structure of the car body. Taking the 2020 Jetta as an example, its body dimensions are: length 4419mm, width 1841mm, height 1616mm, wheelbase 2630mm, fuel tank capacity 51l, and trunk capacity 482l. The 2020 Jetta features a front McPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 1.4L inline 4-cylinder turbocharged engine, with a maximum horsepower of 150ps, maximum power of 110kw, maximum torque of 250nm, matched with a 6-speed automatic manual transmission.
16
1
Share

What are the signs that the transmission fluid in a Buick GL8 needs to be replaced?

The signs that the transmission fluid in a Buick GL8 needs to be replaced are: 1. Vehicle shaking and gear shifting hesitation; 2. Transmission overheating warning appears on the dashboard; 3. Engine stalling; 4. Unusual noises. Taking the 2020 Buick GL8 as an example, its body dimensions are: length 5219mm, width 1878mm, height 1805mm, with a wheelbase of 3088mm and a fuel tank capacity of 71 liters. The 2020 Buick GL8 features a front MacPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 237PS, a maximum power of 174kW, and a maximum torque of 350Nm, paired with a 9-speed automatic transmission.
7
1
Share

How to Clear the Maintenance Reminder for Mercedes-Benz GLA200?

Here are the steps to clear the maintenance reminder for Mercedes-Benz GLA200: 1. Use the buttons on the left side of the steering wheel to access the instrument cluster information center menu. 2. Navigate to the (Maintenance) menu using the left/right buttons. 3. Scroll to (ASSYST-PLUS) using the up/down buttons, then press the OK button. 4. The instrument cluster will display the remaining kilometers until the next maintenance, completing the reminder clearance. Below is an introduction to the Mercedes-Benz GLA: 1. The Mercedes-Benz GLA is built on the MAF platform, which also underpins the new Mercedes-Benz A-Class and B-Class. Its main competitors are the BMW X1 and Audi Q3. In terms of exterior design, the production version of the GLA is expected to retain the concept car's styling, with adjustments for production, mainly in the headlights and front grille. The dimensions of the Mercedes-Benz GLA are 4417mm in length, 1804mm in width, and 1494mm in height. 2. The production version of the Mercedes-Benz GLA will offer multiple powertrain options. For gasoline engines, the car will be equipped with a 1.6T engine and a 2.0T engine. The former has maximum power outputs of 90kW (122Ps) and 115kW (156Ps) depending on tuning, while the latter delivers a maximum power of 155kW (211Ps). For diesel engines, the car will feature a 1.8T and a 2.1T engine. Additionally, the future Mercedes-Benz GLA45 AMG will be powered by a 2.0T engine with a maximum power output of 265kW (360Ps) and a peak torque of 450Nm.
19
0
Share

Should You Apply Film to the Car's Windshield?

Applying film to the car's windshield is beneficial for the following reasons: 1. Heat and sun protection - the film effectively blocks a significant amount of heat generated by infrared rays; 2. UV protection - medium and long-wave ultraviolet rays can penetrate thick glass, but applying heat-insulating film can block most UV rays, protecting the skin and slowing down the aging of car interiors; 3. Safety and explosion-proof - the base layer of car film is made of polyester, which has excellent tear and puncture resistance. Combined with the adhesive layer, the film strengthens the glass to prevent injuries caused by accidental glass breakage; 4. Creating a private space - with the right type of film, the car's interior becomes less visible from the outside while maintaining clear visibility from the inside, ensuring privacy and safety; 5. Enhancing aesthetics - the film allows for personalized car styling based on individual preferences; 6. Reducing glare - it minimizes accidents caused by glare.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.