How to Clean and Maintain a Car Sunroof?

2 Answers
DiJulian
07/25/25 11:07am
The glass panel of the sunroof has functions of heat insulation and UV protection. It should be cleaned with a soft cloth and cleaning agent, avoiding the use of sticky cleaning agents. If the vehicle will be parked for a long time or the sunroof is not used for an extended period, apply fine talcum powder or a specialized lubricant to the rubber seals around the sunroof. Below are specific details about car maintenance: 1. Definition: Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. 2. Maintenance Scope: Modern car maintenance mainly includes the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. 3. Purpose: The purpose of car maintenance is to keep the car clean, maintain normal technical conditions, and eliminate potential hazards.
Was this review help?
10
3
Share
OHaven
08/11/25 7:57pm
Cleaning and maintaining a car sunroof is actually quite simple. I often drive long distances, so sunroof maintenance is routine for me. First, use a vacuum cleaner to remove surface dust to prevent it from accumulating in the gaps. Then, mix a neutral cleaner with warm water and use a soft cloth to wipe the glass and rubber seals—avoid strong acidic products to prevent corrosion. Check the drainage holes every quarter, using compressed air or a thin wire to clear them and prevent clogging or leaks. Lubricating the tracks is key; apply a thin layer of silicone-based lubricant, but don’t overdo it to avoid trapping debris. After maintenance, test the opening and closing a few times to ensure smooth operation. Extra tip: Cover the sunroof with a protective shield when parked under trees to prevent leaf blockages—this habit has saved me a lot on repairs. Regular care like this can extend its lifespan by ten years.
Was this review help?
17
3
Share
Expand All
More Forum Discussions

What should be noted when temporarily parking a motor vehicle in rainy weather?

When temporarily parking a motor vehicle in rainy weather, it is important to turn on the hazard warning flashers to alert vehicles in front and behind. Rainy weather is a high-risk period for traffic accidents, as visibility decreases for drivers and rain reduces the friction between tires and the road surface, increasing the likelihood of accidents or unexpected incidents. When driving in the rain, reduce speed and maintain a safe distance from vehicles ahead and behind, always observing their movements. Be mentally prepared to take emergency measures if necessary, and use hazard warning lights to ensure following vehicles are aware of your presence and actions, helping to prevent accidents. In heavy rain, which can significantly obstruct the driver's view, it is advisable to turn on the headlights or front fog lights.
17
5
Share

Which line should be aligned with when reversing into the parking space?

When reversing into the parking space, align with the white border line. Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and is the abbreviation for the field driving skill test subject. The test items for small cars C1 and C2 include five mandatory tests: reversing into the parking space, parallel parking, stopping and starting on a slope, turning at a right angle, and driving in curves (commonly known as S-curves). Below are the precautions for the Subject 2 test: Fasten the seat belt: Fasten the seat belt immediately after getting into the car. Remember not to buckle the seat belt backward or to the co-pilot's side, otherwise the system will directly judge the test as unqualified. Do not unfasten the seat belt at will during the entire test. Adjust the seat, etc.: After getting into the car, adjust the seat, adjust the rearview mirror, fasten the seat belt, turn on the left turn signal, engage the first gear, and release the handbrake. These six items are indispensable. Make sure all preparations are completed before starting. No stopping during the process: There is no time limit for reversing into the parking space, but it should be noted that stopping during the reversing process is not allowed. If the wheels are stationary for 3 seconds, the system will judge it as stopping midway. Therefore, controlling the speed is crucial. The time for starting on the slope is 30 seconds: The time for starting on the slope is 30 seconds, and the system will give a voice prompt every 10 seconds. Exceeding 30 seconds will directly result in disqualification.
1
1
Share

How to Charge an Electric Sedan at Home?

Simply plug the portable charger into a 220V 16A power socket at home. Below is relevant information about electric sedans: 1. Introduction: An electric sedan refers to a vehicle powered by an onboard power source, driven by an electric motor, and meeting all road traffic and safety regulations. Electric vehicles can also utilize surplus electricity during off-peak nighttime hours for charging, enabling power generation equipment to operate efficiently around the clock, significantly enhancing economic benefits. 2. Structure of Electric Sedans: Electric vehicles consist of six main components: chassis, body, battery pack, electric motor, controller, and auxiliary battery facilities. Due to the excellent traction characteristics of electric motors, the transmission system of battery-powered vehicles does not require clutches or gearboxes. Speed control is achieved by the controller adjusting the motor's speed through the speed regulation system.
18
0
Share

How to Maintain the Buick Verano?

It is recommended to perform the first maintenance for the Buick Verano at 3,000 kilometers, followed by maintenance every 5,000 kilometers. During maintenance, it is advisable to follow the official maintenance intervals, conduct regular inspections, and use recommended fluids and lubricants. The Verano comes with two complimentary services for oil and oil filter changes, valid for 3 years or 100,000 kilometers, whichever comes first. The Buick Verano is a compact car with body dimensions of 4,723mm in length, 1,802mm in width, 1,466mm in height, and a wheelbase of 2,700mm. The car is equipped with 1.0-liter and 1.3-liter turbocharged engines, featuring aluminum alloy cylinder heads and blocks.
5
2
Share

How to Duplicate a Key?

Prepare the key that needs to be duplicated and place it over a lighter to create a blackened impression. Attach transparent tape to the blackened key, then transfer the tape onto a piece of sheet metal. Use scissors to cut along the key's shape and structure imprinted on the tape. Below is relevant information about keys: 1. Concept: Keys are commonly used unlocking tools in daily life, primarily made from metals such as copper, zinc, aluminum, iron, and others. 2. Classification: With advancements in automotive manufacturing technology, devices used to unlock car doors and start engines are collectively referred to as keys. Mechanical car locks are the most common and earliest form of car anti-theft devices, though they are rarely used alone in mid-to-high-end vehicles. Mechanical locks mainly serve to restrict vehicle operation and offer limited assistance in theft prevention, making them relatively easy to bypass.
19
5
Share

How to Deal with Frost on Windows?

To prevent frost on windows, ventilate the car after use before locking it. Here is some related information about frost formation: 1. Principle: Because water vapor in the air condenses into droplets when it encounters cold, it does not condense when it encounters heat. The temperature inside the car will not always be higher than the outside, and the humidity inside the car is not high. The formation of frost on the car is the same as the frost on external branches, grass leaves, and the ground. The conditions for frost formation must be a clear and windless night with relatively high air humidity. The windshield initially has a high temperature, but it gradually radiates and cools down, lowering its own temperature while the surrounding air temperature rises, leading to frost formation on the surface. Therefore, frost forms on the surfaces of objects that radiate and cool down. The more easily an object's surface radiates heat and cools quickly, the more likely frost will form on it. 2. Prevention Methods: Isolate water vapor from contacting the glass by using a car cover or placing a large cloth over the windshield.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.