How to Claim Compensation for Vehicle Quality Issues?

How to Use Keyless Entry?

Carry the car key with you, and there's no need to take it out when opening the door. The car key will automatically match the car's decoder when it is near the vehicle. Simply press the unlock button on the car door handle to unlock (some cars may unlock by pulling the door handle).

6

4

Share

What to Do If You Lose Your Smart Key with One-Button Start?

Take the spare key to a 4S dealership to have a new one reprogrammed. Once the new key is successfully programmed, the unlock system's code will automatically be updated, rendering the original key invalid. After getting a new car key, although the original key will no longer work, the mechanical key can still unlock the doors. Therefore, it's necessary to replace all the mechanical locks on the entire vehicle.

20

5

Share

What to Do If the Clutch Plate Fails During the Warranty Period?

According to the terms of the three-guarantee policy, the scope of wear-and-tear parts can be easily determined. The clutch is considered a wear-and-tear part, but it can still be covered under warranty during the warranty period. It is recommended to contact the local 4S dealership for inspection and repair.

11

0

Share

How to Remove the Cigarette Lighter from the Car?

First, turn on the car's power supply. The cigarette lighter will start heating up. When the temperature of the heating wire reaches a certain level, it will automatically pop out. Alternatively, you can wait for 5-8 seconds until the heating wire turns red, then pull out the upper part of the cigarette lighter directly.

12

3

Share

What is the tire model for the 9.5th generation Accord?

The tire sizes for the Honda Accord 9.5th generation are 225/50R17, 215/60R16, and 235/45R18. In 225/50R17, the first number 225 represents the tire width of 225MM, 50 indicates the aspect ratio of the tire section is 50%, meaning the section height is 50% of the width, and 17 represents the rim diameter of 17 inches. The middle letter "R" stands for radial tire. In 215/60R16, the first number 215 represents the tire width of 215MM, 60 indicates the aspect ratio of the tire section is 60%, meaning the section height is 60% of the width, and 16 represents the rim diameter of 16 inches. The middle letter "R" stands for radial tire. In 235/45R18, the first number 235 represents the tire width of 235MM, 45 indicates the aspect ratio of the tire section is 45%, meaning the section height is 45% of the width, and 18 represents the rim diameter of 18 inches. The middle letter "R" stands for radial tire. The Accord 9.5th generation uses Dunlop tires, which have a long service life, and the spare tire size is non-full size. If you want to replace the tires yourself, you can follow the steps below: Take out the spare tire and jack, place the jack under the frame of the tire to be replaced, ensuring the jack touches the metal part of the frame; Raise the jack until it supports the car. The jack should be positioned under the vehicle. Check and ensure the jack is perpendicular to the ground; Remove the hub cover, loosen the nuts counterclockwise. Do not fully loosen the nuts, just enough to eliminate resistance. When loosening the nuts for the first time, keeping the tire on the ground ensures that the nuts, not the tire, are turning; Turn the nuts counterclockwise until they are loose. Repeat this step for all lug nuts, then fully remove the nuts; Place the new tire on the hub, carefully align the tire rim with the wheel bolts, install the lug nuts, and tighten them by hand until all nuts are concealed. At this point, the tire replacement is complete. In addition to the model, the tire also carries the following common data: Tire cord material: Indicated by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters A to Z represent certified speed ratings from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: Indicates the rim specification compatible with the tire for practical use, such as standard rim 5.00F.

12

0

Share

How to Inspect Piston Rings During Engine Repair?

After forcibly closing the free gap of the ring and then releasing it, the plastic deformation should not exceed 10% of the original free gap, indicating that the elasticity of the piston ring is qualified. Compare the free gap of the new and old rings. If the free gap of the old ring is smaller, it indicates plastic deformation and reduced elasticity.

13

1

Share

How to Claim Compensation for Vehicle Quality Issues?

How to Use Keyless Entry?

What to Do If You Lose Your Smart Key with One-Button Start?

What to Do If the Clutch Plate Fails During the Warranty Period?

How to Remove the Cigarette Lighter from the Car?

What is the tire model for the 9.5th generation Accord?

How to Inspect Piston Rings During Engine Repair?

How to Open the Hood of a Magotan?

How to Read the Water Temperature Gauge on a Ford Mondeo?

How to Operate the Nissan Sylphy Automatic Transmission?

What to Do When the Car Won't Start and the Brake Pedal is Stiff?