How to Choose the Most Effort-Saving Gear for Uphill Driving?

What grade of gasoline should the Elysion use?

The Elysion uses 92-grade gasoline. Gasoline is a volatile, flammable hydrocarbon mixture liquid distilled or cracked from petroleum, used as fuel. Different grades represent different anti-knock properties of the fuel, with higher gasoline grades indicating better anti-knock performance. Taking the Honda 2019 Elysion as an example, it is an MPV with dimensions of 4950mm in length, 1842mm in width, and 1711mm in height, a wheelbase of 2900mm, a minimum ground clearance of 134mm, and a curb weight of 1941kg. The 2019 Honda Elysion features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 2.0L naturally aspirated engine producing a maximum horsepower of 146PS, a maximum torque of 175Nm, and a maximum power of 107kW, paired with an electronic continuously variable transmission.

12

4

Share

Where is the hazard warning flasher located?

The hazard warning flasher switch exists independently, marked by a red triangle. Pressing it once will activate the hazard warning flashers. Commonly, the hazard warning flasher switch is located on the center console to the right of the steering wheel, though some models may have the switch positioned below the center console. More information about hazard warning flashers is as follows: 1. The full name of the hazard warning flasher is 'hazard warning signal light,' also commonly referred to as 'emergency flashers.' It is a signal light on a vehicle, primarily used to alert other drivers and pedestrians that the vehicle is experiencing a special situation, prompting them to yield in a timely manner. 2. The usage scope of hazard warning flashers can essentially be summarized in one sentence: while driving, if you need other vehicles to slow down or even stop to yield to you, you should typically activate the hazard warning flashers.

19

5

Share

What Causes the Steering Wheel to Be Misaligned?

The reasons for a misaligned steering wheel include uneven tire pressure on both sides, unequal caster angles, and improper toe-in. Below are detailed explanations: Uneven Tire Pressure: Uneven tire pressure on the left and right sides can cause the tires to have different heights, resulting in one side of the vehicle being higher than the other, leading to steering drift. It is necessary to check the tire pressure on both sides and adjust it regularly. Unequal Caster Angles: In the longitudinal vertical plane, the angle between the kingpin axis and the vertical line is called the caster angle. If the angles of the wheels on both sides differ, it can cause the steering wheel to be misaligned. Improper Toe-In: Improper toe-in can cause the vehicle to drift and lead to abnormal tire wear. It is recommended to visit a repair facility for a four-wheel alignment.

15

3

Share

How to Remove the Front Bumper of a BMW 3 Series?

BMW 3 Series front bumper removal: First, remove the screws located underneath the front bumper. Then, open the front hood. There are three additional screws beneath the headlights that secure the bumper to the vehicle's frame. Finally, remove the screws on the frame to safely detach the bumper. Below is some relevant information about bumpers: 1. In addition to maintaining their original protective function, the front and rear bumpers of vehicles also aim for harmony and unity with the body design, as well as lightweight construction. Currently, the front and rear bumpers of cars are made of plastic, commonly referred to as plastic bumpers. Plastic bumpers consist of three parts: the outer panel, buffer material, and crossbeam. 2. Plastic bumpers provide strength, rigidity, and decorative appeal. From a safety perspective, they help absorb impact during collisions, protecting the front and rear body of the vehicle. Aesthetically, they integrate seamlessly with the body, forming a unified appearance and serving as an important decorative component of the vehicle's exterior.

1

5

Share

Is a Vehicle Inspection Line Required for the Sixth-Year Annual Inspection?

The six-year exemption for new vehicles means that new cars do not need to undergo inspection line testing within the first six years. Below are the application method for the electronic annual inspection and how to identify the inspection date: Method to apply for the electronic annual inspection label for vehicles exempt from inspection within six years: Open the Traffic Management 12123 app, find "Apply for Inspection Exemption Label for Exempt Vehicles" in the service center. After confirming the information is correct, obtain the verification code, enter it, and then submit to receive the motor vehicle inspection qualification label, which is the electronic annual inspection label. Determining the annual inspection date: The vehicle annual inspection date is not calculated based on a specific date but rather by month. For example, if the annual inspection is due on September 10th, you can perform the vehicle inspection in advance during July, August, or September. Even if the inspection is conducted on the last day of September, it is still within the reasonable time frame.

13

5

Share

Why is the braking sound harsh?

Harsh braking sounds may be caused by worn brake pads, foreign objects in the brake pads, or the break-in period of newly replaced brake pads. Below are the relevant explanations: 1. Worn brake pads: When a car has been used for many years or has high mileage, the brake pads may age and wear out, leading to abnormal noises. In this case, the brake pads should be replaced at a 4S shop. 2. Foreign objects in the brake pads: If the car has driven through muddy or bumpy roads, small stones or other debris may get stuck in the brake pads, causing friction and abnormal noises. This situation only requires cleaning the brake pads. 3. Break-in period of newly replaced brake pads: When new brake pads are installed, there might be some noise initially. This usually resolves after driving for a while to allow the pads to break in. If the noise persists after some time, it is advisable to visit a 4S shop or repair shop for professional inspection.

9

0

Share

How to Choose the Most Effort-Saving Gear for Uphill Driving?

What grade of gasoline should the Elysion use?

Where is the hazard warning flasher located?

What Causes the Steering Wheel to Be Misaligned?

How to Remove the Front Bumper of a BMW 3 Series?

Is a Vehicle Inspection Line Required for the Sixth-Year Annual Inspection?

Why is the braking sound harsh?

What is the purpose of installing a shark fin on a car?

How to Remotely Start a Car?

Is It Illegal to Install a Rear Spoiler on a Car?

How to set up one-touch window control for Audi A6?