How to Choose Engine Oil for Cars?

Can the license plate be retained after selling the car?

After selling the car, the license plate can be retained for half a year. During this period, the original owner can purchase another vehicle and apply to use the retained license plate. If the deadline is exceeded, the original license plate will be reclaimed by the vehicle management office. The license plate number consists of Chinese characters, English letters, and a five-digit serial number. Its functions are: 1. To number and register information for each vehicle; 2. To identify the region to which the vehicle belongs; 3. To trace the owner and registration information of the vehicle based on the license plate. Types of license plate numbers: 1. White represents military or police plates; 2. Blue represents ordinary small vehicles with seven seats or fewer; 3. Yellow represents ordinary large vehicles; 4. Black represents foreign enterprise plates.

17

3

Share

Must the ETC device be affixed to the windshield?

The ETC device can be used without being attached to the windshield. Installing the ETC on the upper part of the windshield is intended to minimize obstruction of the driver's view while ensuring better recognition by highway toll station equipment. If you prefer not to install it on the windshield, place it in an open area where it can still be seen through the windshield. For passenger cars, the ETC is typically installed in the upper middle section of the front windshield, while for large vehicles like trucks and buses, it is installed in the lower middle section. The recommended installation height is between 1.2 meters and 2.5 meters, with an installation angle ranging from 30 to 90 degrees. If the vehicle has a built-in or aftermarket explosion-proof film, which may interfere with microwave signal transmission, the ETC should be installed in the microwave window area. Here are some important considerations for ETC installation: 1. Avoid obstructing the driver's view—installing it behind the rearview mirror is ideal: Many car models have windshields with a steep rearward angle, which can reduce the driver's field of vision. Installing the ETC without considering this may increase blind spots. Placing it behind the rearview mirror on the right side helps avoid blocking the driver's view. 2. Ensure it does not interfere with charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement, as it has a built-in solar panel for self-charging. Therefore, avoid installing it on the windshield's blackened areas or any location that might block the solar panel. 3. Do not remove it once installed: The adhesive backing includes an anti-tamper rod connected to a switch. Once installed, the windshield presses the rod inward. If the device is removed, the rod pops out, triggering the switch and locking the electronic tag, rendering it unusable until unlocked at an ETC service center. This mechanism prevents multiple vehicles from sharing a single device. Additional usage tips for ETC: - The ETC transaction sensing range is 8 meters. To avoid unintended payments due to malfunctions in the vehicle ahead, maintain a distance of at least 10 meters from the preceding car. - The ETC lane recognition speed is 20 km/h. Driving too fast may prevent the system from reading the device, leading to failed transactions. - If using a debit card linked to the ETC, insufficient balance may also cause transaction failures.

11

0

Share

How to turn on the high beam of Volkswagen cars?

Volkswagen cars' high beam can be turned on by following these steps: 1. The horizontal lever on the left side of the steering wheel controls the turn signals; 2. The front end of the lever can be twisted, with two positions: twist once for the parking lights, and twist again for the low beam; 3. With the low beam on, push the lever upwards to activate the high beam. The composition of car lights: 1. Parking lights: To alert other vehicles and pedestrians; 2. Turn signals: To signal turns to other vehicles and pedestrians; 3. Headlights: Consisting of low beam and high beam, used for illumination; 4. Fog lights: Used in foggy conditions; 5. Reverse lights: To alert pedestrians and vehicles behind; 6. Brake lights: To alert vehicles behind.

7

3

Share

Why does the 2013 Peugeot 408 have high fuel consumption?

The actual fuel consumption of the 2013 Peugeot 408 is 7.8L/100KM, while the official MIIT test cycle fuel consumption is 6.7L/100KM. The actual fuel consumption is significantly influenced by driving habits, techniques, road conditions, climate, etc. Generally, a fluctuation of around 10% is considered normal. Below is more information about the Peugeot 408: 1. Body dimensions: The new Peugeot 408 has a length of 4750mm, a width of 1820mm, a height of 1488mm, and a wheelbase of 2730mm. 2. Powertrain: The Peugeot 408 is equipped with mainstream engines from Dongfeng Peugeot, offering two displacement options: 2.0L and 1.6L. The 2.0L model is the main promoted variant of the 408.

12

1

Share

How to Apply for Vehicle ETC?

ETC can be applied for at bank branches, expressway service areas, and other institutions. The application requires the original and photocopies of the vehicle owner's valid ID card and vehicle license. If the application is not made by the owner, the agent's valid ID card is also required. The photocopy of the vehicle license must include the page with the most recent annual inspection seal. A Postal Savings credit card application form is needed, as this credit card will be used to bind the ETC card. After obtaining the credit card, swipe it twice and present the POS slip to receive and install the ETC onboard device for free at designated Postal Savings outlets. No fees are charged during this process. Applicants must be between 18 and 60 years old and own the vehicle in their name. ETC stands for Electronic Toll Collection, meaning electronic toll system. The application requires the original and photocopies of the vehicle owner's valid ID card and vehicle license. If the application is not made by the owner, the agent's valid ID card is also required. The photocopy of the vehicle license must include the page with the most recent annual inspection seal. A bank card for deducting expressway toll fees is needed. Applicants must be between 18 and 60 years old and own the vehicle in their name. Here are the precautions for installing ETC: Do not obstruct the view; it is best to install it behind the rearview mirror: Many car models have a steeply inclined windshield, which can reduce the driver's field of vision. If this is not considered during ETC installation, it may increase the driver's blind spots. Install it behind the rearview mirror on the right side to avoid obstructing the view. Do not interfere with charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement, as it has a solar panel on the back for self-charging. Therefore, during installation, avoid the blackened areas on the windshield and positions that may block the solar panel. Do not remove it randomly once installed: The button in the middle of the adhesive is an anti-removal lever connected to a switch. After installation, the windshield will press the anti-removal lever in. If the tag is removed carelessly, the lever will pop out and trigger the switch, locking the electronic tag and rendering it unusable. You will then need to visit an ETC service point to unlock it. This is designed to prevent multiple vehicles from sharing one device. Notes for using ETC: The ETC transaction sensing range is 8 meters. To prevent issues caused by the ETC device of the vehicle in front malfunctioning, maintain a distance of more than 10 meters from the vehicle ahead to avoid automatic toll payment for it. The ETC lane recognition speed is 20 kilometers per hour. Driving too fast may result in failure to read the vehicle's device information and toll deduction failure. When using a debit card to bind ETC, insufficient balance may also cause toll deduction failure.

14

1

Share

What Are the Hazards of Gear and Speed Mismatch?

The hazards of gear and speed mismatch are: 1. Accelerated wear and tear on mechanical components, leading to premature damage to the engine and transmission; 2. Insufficient engine power causing stalling or engine strain resulting in vehicle shaking. The corresponding speed ranges for each gear in a manual transmission are: 1. 1st gear corresponds to 10 to 20 kilometers per hour; 2. 2nd gear corresponds to 20 to 30 kilometers per hour; 3. 3rd gear corresponds to 30 to 40 kilometers per hour; 4. 4th gear corresponds to 40 to 50 kilometers per hour; 5. 5th gear corresponds to 50 to 60 kilometers per hour; 6. 6th gear corresponds to speeds above 60 kilometers per hour. The steps for starting a manual transmission vehicle are: 1. Sit properly in the car; 2. Start the engine; 3. Press the clutch; 4. Engage 1st gear; 5. Slowly release the clutch; 6. Gently press the accelerator; 7. Fully release the clutch, completing the vehicle start-up process.

5

Share

How to Choose Engine Oil for Cars?

Can the license plate be retained after selling the car?

Must the ETC device be affixed to the windshield?

How to turn on the high beam of Volkswagen cars?

Why does the 2013 Peugeot 408 have high fuel consumption?

How to Apply for Vehicle ETC?

What Are the Hazards of Gear and Speed Mismatch?

What does the car P button symbol mean?

What to Do When the Steering Wheel is Locked and the Car Won't Start?

What are the reasons why the trunk of an Audi A4 cannot be opened?

What is the solution for the ACC and PCS malfunctions in the Boyue?