···
Log in / Register

How to Choose Between the New Yaris L and the New Fit?

4 Answers
SanDante
07/24/25 11:06pm
When comparing the new Yaris L and the new Fit, the analysis primarily focuses on fuel economy, maintenance costs, comfort, and power performance, with the Yaris L holding more advantages. It's not that the Fit is inferior, but from a practical family-use perspective, the Yaris L has the upper hand.
Was this review help?
3
2
Share
Jenna
08/10/25 10:25am
Recently, I compared the new Yaris and the new Fit, and I feel that when choosing a family car, overall performance is key. The Yaris has a more reasonable space layout, with enough room in the back seat for three people without feeling too cramped, and the trunk depth is ample, making it easy to fit a stroller or large luggage. The Fit's Magic Seat design is indeed flexible, but its overall storage space isn't as tidy as the Yaris. In terms of fuel consumption, both are similar, averaging just over 5 liters per 100 kilometers, but the Yaris has longer maintenance intervals, saving about 200 yuan on oil and filter changes. The Yaris also has a more stable chassis tuning, with less bumpiness over speed bumps, while the Fit is more agile in turns. For safety features, the Yaris comes standard with seven airbags and active braking across all trims, which is especially important for families with kids. In the end, I chose the Yaris because stability and practicality are the most critical factors for a family car.
Was this review help?
16
5
Share
Expand All
EllieMarie
09/26/25 6:50am
When I test drove these two models during my car change last year, the Fit was more fun to drive for young people. The 1.5L Earth Dreams engine responds directly to power, with the revs climbing quickly when you step on the accelerator, making overtaking in the city particularly effortless. In comparison, the Yaris feels a bit more laid-back, better suited for those with a more relaxed driving style. The Fit also excels in modification potential—it's easy to change the front and rear bumpers, and you can directly add a CarPlay module to the center console. The interior design of the Fit is more youthful, featuring a dual-spoke steering wheel that feels sporty, and the instrument panel displays rich information. In terms of space, the Fit's Magic Seats are quite practical; I could fit my road bike in the back with the seats folded down. Although the Yaris offers more comprehensive features, if driving experience is a priority, the Fit is definitely the better choice.
Was this review help?
19
5
Share
Expand All
VonJulianna
11/10/25 2:06am
With a limited budget, I carefully compared the prices of the two cars. The entry-level Yaris is about 5,000 yuan cheaper, yet it offers more generous standard features, including LED headlights and auto start-stop. In contrast, the base Fit even cuts corners on the audio speakers and still uses drum brakes for the rear wheels. Fuel consumption tests show the Fit is slightly more economical by 0.3L, but the Yaris can run on cheaper 92-octane fuel, saving more in the long run. Maintenance costs favor Toyota, with minor services costing just over 400 yuan, while the Fit is a few dozen yuan more expensive. Both cars hold their value well, retaining about 70% of their price after three years. The Yaris offers more headroom in the rear seats. In the end, I chose the Yaris and used the savings to install a reverse camera.
Was this review help?
4
5
Share
Expand All
More Forum Discussions

What is the purpose of car ABS?

The purpose of car ABS is to continuously switch between the critical point of tire sliding and rolling, effectively shortening the braking distance and preventing the vehicle from skidding during emergency braking. The working principle process of car ABS is: 1. The ABS system monitors the rotation speed of the four wheels. When a wheel is about to lock, the system releases the brake of that specific wheel, allowing it to resume rotation; 2. After the wheel is about to resume rotation, braking hydraulic pressure is applied to that wheel; 3. When the wheel is about to lock again, the system releases the brake of that specific wheel; 4. The system repeats the above process multiple times within one second to maximize the potential of the brakes and ensure the stability and normal operation of the vehicle.
17
5
Share

What Causes the BMW 740 to Shake During Rapid Acceleration?

Reasons for the BMW 740 shaking during rapid acceleration: Severe Engine Carbon Buildup: The most common cause of car shaking is a dirty throttle body or excessive carbon buildup in the fuel injectors. When there is too much carbon buildup inside the engine, the gasoline sprayed by the cold start injector is largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during cold starts and making it difficult to start. In this situation, the car will only start easily once the carbon deposits have absorbed enough gasoline to reach saturation. After starting, the gasoline adsorbed on the carbon deposits is then drawn into the combustion chamber by the engine's vacuum suction, causing the air-fuel mixture to become too rich. The engine's combustible mixture alternates between being too lean and too rich, leading to idle shaking after a cold start. Ignition System Issues: Check the condition of the spark plugs, high-voltage wires, and ignition coils. Poor performance in the ignition system or inadequate spark plug firing can also cause this type of problem. Unstable Fuel Pressure: If you have already cleaned the engine carbon deposits, throttle body, replaced the fuel gasket and spark plugs, but still notice the car shaking at idle, it is recommended to visit a 4S shop to check whether the fuel supply pressure and intake pressure sensor are functioning properly. Abnormal fuel pump pressure or incorrect readings and poor performance of the intake pressure sensor can also cause the car to shake.
19
4
Share

Does the replacement of the front windshield for Skoda Octavia require an original factory part?

Skoda Octavia front windshield replacement does not require an original factory part. Windshield: The function of the windshield is to provide a survival space for passengers. When impacted and shattered, the glass breaks into small pieces with blunt edges, minimizing harm to occupants. Currently, most car front windshields are made of laminated tempered glass or zoned tempered glass, which can withstand strong impacts. Zoned tempered glass is a new type of tempered glass that undergoes special treatment to maintain a certain level of clarity when cracked upon impact, ensuring the driver's field of vision remains unaffected. Precautions for windshield replacement: Do not wash the car for three days after replacing the windshield. Remove the tape securing the windshield position after three days. Avoid driving on excessively bumpy roads, sudden braking, and rapid acceleration to prevent windshield displacement. Do not insert parking permits or other cards into the gap between the front windshield and the dashboard. Avoid driving on highways and keep the maximum speed below 80 km/h. Do not apply window tinting within seven days. After rear windshield replacement, do not open the windows while driving for three days to prevent displacement caused by wind pressure.
14
1
Share

How to Set the Tire Pressure for Buick Verano?

Buick Verano tire pressure setting method: Select the tire pressure mode on the dashboard, press and hold the checkmark button to enter the learning mode, then inflate and deflate the tires in sequence to complete the setting. The dimensions of the Buick Verano are: length 4723mm, width 1802mm, height 1476mm, with a wheelbase of 2700mm. The Buick Verano is equipped with a 1.3L three-cylinder turbocharged engine, delivering a maximum horsepower of 165PS, maximum torque of 240Nm, and maximum power of 121kW. The maximum power speed is 5600rpm, and the maximum torque speed ranges from 1500 to 4000rpm. It is paired with a CVT continuously variable transmission.
2
4
Share

What Causes Manual Transmission Shudder During Startup?

Manual transmission shudder during startup is caused by: 1. Insufficient engine power; 2. Loose connection between the transmission and chassis; 3. Uneven engagement of the clutch pressure plate and clutch friction disc. The correct method for starting a manual transmission is: 1. Fully depress the clutch; 2. Shift into first gear; 3. Turn on the left turn signal; 4. Sound the horn as a reminder; 5. Release the handbrake; 6. Gently lift the clutch with the left foot; 7. As the vehicle begins to move, stabilize the clutch with the left foot, avoiding any pressing or lifting to prevent stalling. Hold steady for 3 seconds, then slowly release the clutch while gently pressing the accelerator with the right foot. Gradually release the accelerator, fully depress the clutch to shift to second gear, and repeat the process to shift to third gear, ensuring a smooth and stable vehicle startup.
19
1
Share

What engine is used in the Toyota RAV4?

The Toyota RAV4 is equipped with 2.0L and 2.5L naturally aspirated engines. The 2.0L engine has a maximum power output of 126kW and a maximum torque of 209Nm. In terms of the transmission system, the 2.0L engine is paired with a CVT continuously variable transmission. The 2.5L engine delivers a maximum power of 178kW and is matched with an eCVT continuously variable transmission. The Toyota RAV4 has dimensions of 4570mm in length, 1845mm in width, and 1715mm in height, with a wheelbase of 2660mm. It has a minimum ground clearance of 195mm and a curb weight of 1420kg.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.