How to Choose Between the Glory New Truck 1.5 and 1.8?

How to Control the Vehicle Steering Wheel?

Control the vehicle steering wheel by following these steps: 1. Keep your body upright against the seat, adjusting the seat height to a comfortable position; 2. Look straight ahead, gently holding the left side of the steering wheel with your left hand and the right side with your right hand, with arms relaxed and naturally hanging down; 3. Ensure balanced hand movements to avoid unnecessary shaking. The steering wheel is a wheel-shaped device for controlling the direction of travel, converting the force applied by the driver on the wheel's edge into torque transmitted to the steering shaft. Common faults include: 1. Steering wheel lock, where the wheel automatically locks after the engine is turned off as an anti-theft feature; 2. Scratched steering wheel; 3. Steering wheel vibration, caused by tire deformation or vehicle transmission system issues.

12

2

Share

How much fuel does a 450-horsepower engine consume at idle for one hour?

Generally, a household car consumes around 2 liters, but the specific amount depends on the engine displacement and idle speed. The larger the displacement, the higher the fuel consumption at idle. For a 1.6-liter engine at around 800 RPM, the consumption is approximately 0.8L per hour. Idle speed generally refers to the engine running without doing any work—the car remains stationary, but the engine continues to burn fuel. Below is additional information: Consequences of carbon buildup: Carbon buildup can cause incomplete combustion of gasoline, leading to engine shaking. Engine carbon buildup has a significant impact on the car. First, it reduces engine power, meaning uneven and gradually diminishing power output—in other words, the engine becomes weaker over time. Second, it increases fuel consumption, adding to the financial burden.

19

4

Share

Is the Boyue's Dual Clutch Wet or Dry?

The Boyue's dual clutch is dry. The dual clutch is located between the engine and the transmission, serving as the switch for power transmission between the engine and the transmission. It is a transmission mechanism that can both transmit and cut off power. The Boyue's body dimensions are: length 4519 mm, width 1831 mm, height 1694 mm, with a wheelbase of 2670 mm and a fuel tank capacity of 58 liters. The Boyue is equipped with a 1.8T turbocharged engine, with a maximum power of 120 kW and a maximum torque of 250 Nm, paired with a 6-speed manual transmission. It features a front suspension type of MacPherson independent suspension and a rear suspension type of multi-link independent suspension.

19

1

Share

How to Replace the Wiper Blade on a Beam Wiper?

The method to replace the wiper blade on a beam wiper is: 1. Lift the wiper and remove it from the metal arm; 2. Pry up the metal hook, pull out the old wiper blade, and pry open one side of the plastic end cap on the wiper; 3. Install the new blade, cover it with the plastic end cap, and clamp the metal hook tightly to secure it in place. The function of the beam wiper is to clear rain, snow, and dust from the windshield that obstructs the view. The technical name for the beam wiper is 'wiper blade,' which is a blade structure installed in front of the windshield, composed of an electric motor, reducer, four-bar linkage, wiper arm spindle, and wiper blade assembly.

5

0

Share

How to Remove the Battery of a Ford Focus?

Ford Focus battery removal method is: 1. With the engine off, use a 10cm socket wrench to sequentially remove the screws of the battery's upper fixing clamp; 2. Loosen the cable bolt on the negative terminal and remove the cable connector; 3. Loosen the cable bolt on the positive terminal and remove the cable connector; 4. Loosen the cable bolts on both positive and negative terminals, remove the battery fixing bracket, and take out the battery. The Ford Focus has body dimensions of: length 4647mm, width 1810mm, height 1468mm, with a wheelbase of 2705mm. It is equipped with a 1.5L naturally aspirated engine, delivering maximum power of 90kW and maximum torque of 153Nm, paired with a 6-speed manual transmission.

2

1

Share

What are the reasons for electric vehicle motor overheating and not moving?

Reasons for electric vehicle motor overheating and not moving: 1. Brake cable not retracting: Prolonged use causing water ingress and rust at both ends of the brake cable, or damage to the cable sheath at the bottom can prevent the brake from disengaging, accompanied by braking that raises motor temperature. 2. Brake pad wear: Some customers experience ineffective braking and repeatedly tighten the brakes excessively, increasing friction between the brake and motor, leading to higher motor temperature. 3. Broken brake spring: With a broken expansion brake spring, it's difficult for the external spring to return the brake pad to its proper position. The unresponsive brake pad 'closes' without rebounding, creating rolling resistance that raises motor temperature.

8

2

Share

How to Choose Between the Glory New Truck 1.5 and 1.8?

How to Control the Vehicle Steering Wheel?

How much fuel does a 450-horsepower engine consume at idle for one hour?

Is the Boyue's Dual Clutch Wet or Dry?

How to Replace the Wiper Blade on a Beam Wiper?

How to Remove the Battery of a Ford Focus?

What are the reasons for electric vehicle motor overheating and not moving?

What to Do If There Are Mice in the Car?

How to Start a Haval H6 in Emergency?

What Causes Fluctuating Engine Coolant Temperature?

Do Front and Rear Brake Pads Need to Be Replaced Together?