How to Choose Between Lavida and Buick Excelle?

1 Answers
SanKayden
07/25/25 11:20am
The exterior design of the Volkswagen Lavida showcases exquisite craftsmanship. The interior design of the Buick Excelle is very simple and down-to-earth. The dimensions of the Buick Excelle are 4609x1798x1464mm. The dimensions of the Lavida are 4605x1765x1460mm. The Excelle comes with 1.0T, 1.3T, 1.4T, and 1.5L engines. The Lavida offers 1.2T, 1.6L, and 1.4T engines.
Was this review help?
13
3
Share
More Forum Discussions

How to Replace Car Antifreeze?

The method for replacing car antifreeze is as follows: Allow the engine to cool completely, then loosen the drain valve to release the old antifreeze from the bottom of the radiator, and add the newly diluted antifreeze. The functions of antifreeze include: providing anti-corrosion protection for cooling system components, preventing scale buildup to avoid reducing the radiator's cooling efficiency, and ensuring the engine operates within the normal temperature range. It is recommended to replace the antifreeze every 2 years or 40,000 kilometers. This replacement interval is only a reference, as driving conditions vary for each vehicle. Owners can decide the replacement schedule based on actual usage and should regularly check the antifreeze's condition.
1
5
Share

How to Deal with the Persistent Tire Pressure Warning Light in Volkswagen Lavida?

The method to address the persistent tire pressure warning light in Volkswagen Lavida is as follows: Turn on the ignition switch, press and hold the SET button of the tire inflation pressure control system (the tire monitoring button is the black button located on the front panel near the gear lever) until the dashboard indicator light illuminates. Confirm that the new parameters are stored and the light turns off, completing the tire pressure light reset. The Volkswagen Lavida measures 4670mm in length, 1806mm in width, and 1474mm in height, with a wheelbase of 2688mm. It is equipped with a 1.5L naturally aspirated 4-cylinder EA211DMB engine, delivering a maximum horsepower of 113ps and a maximum power output of 83kw. The body structure is a sedan.
14
3
Share

What city does the license plate 'Ji D' belong to?

Ji D is the license plate for Liaoyuan. 'Ji' is the Chinese character abbreviation for Jilin Province, and 'D' is the vehicle management office code for Liaoyuan City. The license plate codes for cities in Jilin Province are: Ji A for Changchun, Ji B for Jilin City, Ji C for Siping, Ji D for Liaoyuan, Ji E for Tonghua, Ji F for Baishan, Ji G for Baicheng, and Ji H for Yanbian Korean Autonomous Prefecture. Vehicle license plates are plates hung on the front and back of a vehicle, usually made of aluminum, plastic, or stickers, displaying the vehicle's registration number, registration region, or other basic information. The English letters on the license plate represent the first-level code of the city where the vehicle is registered, generally assigned by the provincial vehicle management office based on the status of each prefecture-level city, with 'A' for the provincial capital, 'B' for the second-largest city, and so on.
2
0
Share

How to Raise the Car Seat?

There are two ways to adjust the height of a car seat: one is an electric seat, which is adjusted via buttons, and the other is a manual seat, which is adjusted using a lever. Electric seats are generally equipped in higher-end B-segment sedans, with electric adjustment buttons located on the side of the seat. These buttons allow for adjusting the seat's height or forward/backward position. Manual seat height adjustment requires the driver to manually operate a lever. When adjusting the seat, it's important not only to set the height but also the forward/backward position to achieve the optimal driving posture for the driver. The adjustment should not be too far or too close. If the seat is too far, the driver may not be able to brake promptly when needed. If it's too close, the driver's body will be uncomfortably close to the steering wheel, making it difficult to operate.
12
0
Share

How to Turn Off the Daytime Running Lights on a Golf?

Steps to turn off the daytime running lights on a Golf: After getting into the car, insert the key but do not turn it. Then, hold the turn signal lever upward (the high beams will light up) while simultaneously turning the lever to the left without releasing it. Turn the key two notches to power on the dashboard. Once you hear a beep alarm, release the turn signal lever to turn off the daytime running lights. Similarly, turning the lever to the right can turn the daytime running lights back on. Taking the Golf 7 as an example, its dimensions are 4255mm in length, 1799mm in width, and 1452mm in height, with a wheelbase of 2637mm. For the interior, the Golf 7 is equipped with white LED ambient lighting in the front footwells, front interior door handles, and front door trim panels. The brightness of the ambient lighting can be adjusted via the car's computer.
7
3
Share

How to set up one-touch power windows for Toyota Corolla?

Toyota Corolla's method for setting up one-touch power windows is as follows: directly pull up the window button to raise the window to the top, hold for 3 to 5 seconds before releasing, then press the window button to lower the window completely, hold for 3 to 5 seconds before releasing, and the setup will be successful. One-touch power windows refer to a system where the car's window glass can be controlled to fully open or close with a single press of a button. The Toyota Corolla is a compact car with dimensions of 4635mm in length, 1780mm in width, and 1455mm in height, with a wheelbase of 2700mm. In terms of power, the Toyota Corolla is equipped with a 1.2T 116-horsepower L4 turbocharged engine, paired with a CVT continuously variable transmission, delivering a maximum power of 85 kilowatts, a maximum torque of 185 Newton-meters, and a maximum power speed of 5600 revolutions per minute.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.