How to Choose Between CR-V and Enclave S?

What is the Composition of the Crank Connecting Rod Mechanism?

The crank connecting rod mechanism consists of three parts: the engine block group, the piston connecting rod group, and the crankshaft flywheel group. Below is an introduction to the crank connecting rod mechanism: 1. The engine block serves as the skeleton of the engine and the installation base for all its mechanisms and systems. It houses all the main components and accessories of the engine, both internally and externally, and bears various loads. 2. The piston, together with the cylinder head and cylinder wall, forms the combustion chamber. It withstands the gas pressure in the cylinder and transmits the force to the connecting rod via the piston pin to drive the rotation of the crankshaft. 3. The crankshaft is one of the most important components of the engine. Its function is to convert the gas force transmitted by the piston connecting rod group into the rotational torque of the crankshaft for external output, and to drive the engine's valve train and other auxiliary devices.

19

2

Share

Where is the air conditioning relay located in the Beidouxing?

The air conditioning relay in the Beidouxing is located next to the engine compartment fuse box, where there are two black components, one of which is the air conditioning relay. Below is some relevant information about the Beidouxing car: 1. Model: The Beidouxing is a microcar under the Suzuki brand, which has gained immense popularity among domestic consumers. 2. Powertrain: The Beidouxing is equipped with a 1.4-liter naturally aspirated engine, delivering 97 horsepower and a maximum torque of 120 Nm. The engine reaches its maximum power at 6000 rpm and its maximum torque at 3600 rpm. 3. Transmission: This engine features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 5-speed manual transmission. 4. Dimensions: The Beidouxing measures 3400 mm in length, 1575 mm in width, and 1670 mm in height, with a wheelbase of 2335 mm.

11

3

Share

What is the model number of the headlight bulb for the Classic Sylphy?

The model number of the headlight bulb for the Classic Sylphy is: Nissan VS-73. Below is an introduction to the Classic Sylphy: 1. The Sylphy is a new strategic model launched globally by Nissan, featuring innovative design and advanced technology. Its exterior, shaped by S dynamic curves, exudes a stylish and sophisticated look, while the 2700mm ultra-long wheelbase creates a spacious rear knee room for comfortable seating. Starting from 2016, all models produced by Dongfeng Nissan, including the Teana and Sylphy, began gradually using parts made in China. 2. Parts made in China, as the name suggests, are manufactured using Nissan's original technology but with Chinese materials. The headlights of the Sylphy model were also changed from the original Nissan VR-28 to the currently used VS-73 headlight bulbs in January 2017. This new bulb not only offers improved brightness but also represents a qualitative leap in terms of quality.

2

Share

How long is the duration defined as 'no long-term parking'?

The exact duration defined as 'long-term parking' in no long-term parking zones is not specifically stipulated in current traffic regulations. However, if the vehicle is left unattended in such areas, it will definitely receive a ticket. As long as there is someone in the car who can drive away promptly when noticed by traffic police, no penalty will be imposed. Below is relevant information about illegal parking: 1. Legal basis for penalties: Article 90 of the Road Traffic Safety Law states that motor vehicle drivers violating road traffic safety laws and regulations regarding road usage shall be given a warning or fined between 20 and 200 yuan. 2. Illegal parking: Vehicles must not park in sections with no-parking signs/markings, on road segments with separation facilities between motor and non-motor lanes/sidewalks, pedestrian crossings, or construction zones. Parking is also prohibited within 50 meters of intersections, railway crossings, sharp curves, narrow roads under 4 meters wide, bridges, steep slopes, and tunnels.

14

1

Share

Can Shanghai Hu C license plates drive on the Outer Ring Expressway?

Whether Shanghai Hu C license plates can drive on the Outer Ring Expressway. The following are the relevant regulations for Shanghai Hu C license plates: 1. Traffic restrictions: Since December 10, 2000, motor vehicles with Shanghai Hu C license plates are prohibited from entering areas within the city's Outer Ring Road (including the Outer Ring Road itself). 2. Prohibited areas: Before the completion of some sections of the Outer Ring Road, the prohibited areas are temporarily defined as follows: Taihe Road (westward from the Huangpu River) ~ Taihe West Road ~ Gudu Road ~ Guchen Road ~ Hutai Road ~ Tangqi Road ~ Qilianshan Road ~ Hujia Expressway ~ Outer Ring West Second Avenue ~ Outer Ring West First Avenue ~ Outer Ring South First Avenue ~ Yanggao Road Interchange ~ Yanggao South Road ~ Longyang Road Interchange ~ Longyang Road ~ Longdong Avenue ~ Zhangjin Highway ~ Jinqiao Interchange ~ Yanggao North Road to the Yangtze River (including the aforementioned roads). Vehicles with Hu C license plates are prohibited from entering these areas at all times.

9

3

Share

What are the phenomena of late steering when reversing into the right parking space?

There are many phenomena associated with late steering when reversing into the right parking space. Below is a detailed explanation of late steering when reversing into the right parking space: 1. Specific effects: Steering too early will cause the left edge of the parking space to be pressed, and if too early, the car cannot enter the parking space. Steering too late will cause the right edge of the parking space to be pressed, and if too late, the car cannot enter the parking space. Returning the steering wheel too early or too late will cause the rear of the car to press the line. 2. Method: When starting to reverse, turn the steering wheel one and a half turns to the right. Observe the wheel in the right rearview mirror; the distance between the top of the wheel and the right line of the parking space should be about 40 centimeters to ensure that the right side does not press the line when reversing into the parking space. Observe the left rearview mirror; when the left line of the parking space is visible, immediately turn the steering wheel half a turn to the left and continue reversing.

16

1

Share

How to Choose Between CR-V and Enclave S?

What is the Composition of the Crank Connecting Rod Mechanism?

Where is the air conditioning relay located in the Beidouxing?

What is the model number of the headlight bulb for the Classic Sylphy?

How long is the duration defined as 'no long-term parking'?

Can Shanghai Hu C license plates drive on the Outer Ring Expressway?

What are the phenomena of late steering when reversing into the right parking space?

Which region does the license plate 'Lu Q' belong to?

What is the keyout indicator light?

What are the dimensions of the Maserati Kubang?

What are the body dimensions of the Haval F7x?