How to Choose Between Bin Yue and Changan Oushang X5?

What Causes a Motorcycle to Burn Out Spark Plugs?

The reasons for a motorcycle burning out spark plugs include: excessively rich fuel-air mixture, engine oil leakage causing the spark plug to become wet and unable to spark, and mismatch between the spark plug model and heat value. Detailed explanations are as follows: 1. Burning oil. Vehicles that burn oil are very prone to burning out spark plugs. After stopping and restarting, the vehicle may fail to start. The center electrode of the spark plug cannot concentrate the spark, and the spark plug is wet, causing the spark to disperse around instead of igniting the fuel, making it impossible to start the vehicle. The symptom is that the tip of the spark plug often has oil and appears black with carbon deposits. It is necessary to check the piston rings and valve oil seals. 2. Clogged air filter. A clogged air filter leads to an overly rich mixture, which not only makes it difficult to accelerate but also easily burns out spark plugs. The air filter can be cleaned or replaced. 3. Dirty carburetor. A dirty carburetor causing an overly rich mixture can also lead to burning out spark plugs. The carburetor can be cleaned or replaced. 4. Ignition system failure. A faulty electronic ignition system is also one of the common causes of spark plug burnout.

1

5

Share

What does API SN level mean?

api-sn level means the following: api level represents the quality grade of engine oil. It uses a simple code to describe the working capability of engine oil, and sn is a category of api engine oil, representing the highest quality grade of oil. api engine oil is divided into three categories. The following is the relevant content introduction: 1. The "S" series represents oil for gasoline engines, with specifications including: API SA, SB, SC, SD, SE, SF, SG, SH, SJ, SL, SM, SN. 2. The "C" series represents oil for diesel engines, with specifications including: API CA, CB, CC, CD, CE, CF, CF-2, CF-4, CG-4, CH-4, CI-4. 3. When both "S" and "C" letters exist, it means the oil is for both gasoline and diesel engines. The meaning of the letters after S or C is: from "SA" to "SN", each increasing letter indicates that the environmental protection level of the oil is better than the previous one, and the later the letter, the higher the environmental protection level. Among international brands, the oil level is mostly above SF level, and currently, the oil with the highest environmental protection level is "SN" level.

18

2

Share

What are the impacts of severe engine shaking in a car?

Severe engine shaking in a car can lead to excessively lean or rich air-fuel mixture, incomplete combustion of the mixture in the cylinders, and imbalance in power output among cylinders. Below is an introduction to the engine: Definition: An engine is a machine that converts other forms of energy into mechanical energy. Classification: Internal combustion engines, external combustion engines (such as Stirling engines, steam engines, etc.), jet engines, electric motors, etc. Composition: The engine block assembly mainly consists of components such as the cylinder block, cylinder liner, cylinder head, and cylinder gasket. Causes of severe engine shaking include: Severe engine carbon buildup, ignition system issues, aging engine components, and unstable oil pressure.

16

5

Share

How to Locate the Top Dead Center of the First Cylinder in an Engine?

To locate the top dead center (TDC) of the first cylinder in an engine, you can use static measurement, dynamic measurement, or the compression line method. Static Measurement Method: Using the static TDC mark on the engine flywheel as a reference, rotate the engine (for multi-cylinder engines, focus on the first cylinder) until the piston reaches the top of the cylinder and then begins descending. Carefully identify the highest point of the piston using a dial indicator or midpoint stroke method, which corresponds to the TDC. Dynamic Measurement Method: This method often employs a capacitive displacement sensor to directly measure the dynamic TDC. When the piston top reaches TDC, the capacitance between the sensor's fixed plate and the piston (acting as the moving plate) reaches its maximum. Thus, the TDC signal can be obtained using a capacitance measurement device. Compression Line Method: This method determines TDC by recording the cylinder pressure curve when no fuel is supplied. The sensor used in this method is magnetoelectric, featuring a simple structure, easy installation, and durability. It can also be used for real-time engine speed measurement.

13

3

Share

When will the Mingtu undergo a full model change?

Mingtu was launched in the first quarter of 2021 with a full model change. More details about Mingtu are as follows: Mingtu's exterior: Just in terms of exterior design, the all-new Mingtu is eye-catching enough, featuring split headlights and double sickle-shaped taillights, with innovative lighting design. To meet the aesthetic needs of different consumers, it will offer three grille styles: honeycomb dot pattern, chrome strip dot pattern, and glossy black. Mingtu's dimensions: The all-new Mingtu measures 4780mm in length, 1815mm in width, and 1460mm in height, with a wheelbase of 2770mm, positioning it as an entry-level midsize car. Mingtu's powertrain: Its fuel-powered models will be equipped with two engines: a 1.8L and a 1.5T, with maximum power outputs of 143 horsepower and 170 horsepower, respectively. The all-new Mingtu will also introduce a pure electric version equipped with an electric motor delivering a maximum power of 183 horsepower.

7

3

Share

How to Check the Wear Degree of Brake Pads?

Right reverse parking with a wide right side is actually caused by turning the steering wheel too late during reversing. Below is relevant information about right reverse parking: Situations where the steering wheel is turned too late during right reverse parking: If the rear of the car is still far from the corner of the garage (not yet around 30CM), but the right front door handle has already landed on the extension line of the garage's right boundary or to the left, the steering wheel has been turned too late, making it easy to hit the left corner or boundary of the garage. Situations where the right side is too wide during right reverse parking: After most of the car body has entered the garage, if the rearview mirror shows a narrow left and wide right situation, you can turn the steering wheel to the right by 1/4 turn and straighten the direction when the car body is aligned. If the car body is parallel to the garage but the entire car body is biased to the left, without adjustment, it is very easy to hit the left front corner of the garage when exiting left. Therefore, you can first turn the steering wheel to the right by 1/4 turn, observe that the front wheels do not easily cross the line, and when the right side distance is about right, turn the steering wheel to the left by 1/4 turn. When the car body is parallel to the garage again, straighten the direction.

14

5

Share

How to Choose Between Bin Yue and Changan Oushang X5?

What Causes a Motorcycle to Burn Out Spark Plugs?

What does API SN level mean?

What are the impacts of severe engine shaking in a car?

How to Locate the Top Dead Center of the First Cylinder in an Engine?

When will the Mingtu undergo a full model change?

How to Check the Wear Degree of Brake Pads?

What does 'Check Exhaust System' mean?

What to Do If You Miss the License Renewal Deadline?

How Long Does It Take to Schedule the Driving Test for Subject Three?

Which factory produces Baojun?