···
Log in / Register

How to Choose a Transmission?

4 Answers
EvaRose
07/29/25 2:55am

When selecting a transmission, consider the following aspects: 1. Engine compatibility: The chosen transmission must match the engine's torque. The transmission should also align with the engine's installation dimensions. For engines of the same class, different manufacturers may design the front bearing position of the transmission input shaft differently, leading to variations in the input shaft length. 2. Vehicle usage: Determine whether the vehicle will primarily operate in mountainous or flat areas. For dump trucks or vehicles frequently used in mountainous regions, it is advisable to select a transmission without an overdrive gear and with a larger first gear ratio. This benefits both the engine and transmission lifespan. 3. Cab structure: Different vehicle models have varying cab structures, which require either remotely operated transmissions (connected via flexible cables) or directly operated transmissions.

Was this review help?
18
0
Share
TessaMarie
08/12/25 1:10pm

For ordinary people commuting in the city every day, I highly recommend automatic or CVT transmissions. Manual transmissions are too exhausting in traffic jams, constantly pressing the clutch and shifting gears is tiring. Automatic transmissions just need to be put in D to go, while CVT is even smoother without any jerking, making highway driving effortless. In terms of fuel efficiency, CVT is slightly more economical, while automatics consume a bit more but the difference is small—just an extra few dozen dollars in fuel costs per month. Maintenance costs are slightly lower for CVT, while automatics require periodic fluid changes. Prioritize safety and comfort to avoid unnecessary hassle. If on a tight budget, an entry-level automatic is sufficient. Remember, a car is a tool—choose one that’s worry-free to drive for a better mood.

Was this review help?
12
0
Share
Expand All
Emerson
10/02/25 5:02am

I prefer driving pleasure, with manual MT or dual-clutch DCT transmissions being my top choices. A manual gearbox gives you complete control over shift timing, which is exhilarating on downhill roads or when you're in the mood. DCT responds lightning-fast and delivers aggressive acceleration, making it a blast on the track. Automatic AT feels too monotonous, while CVT is sluggish and lacks excitement. However, DCT may exhibit some jerkiness at low speeds, which you'll have to tolerate. In terms of maintenance, manual transmissions are the most reliable and cost-effective, while DCT is slightly more expensive but worth the price for its performance. When choosing, consider your budget—high-performance cars paired with DCT or manual transmissions are a perfect match. Don't sacrifice fun for convenience. Once you experience that rush, you'll understand.

Was this review help?
5
2
Share
Expand All
DiHeidi
11/15/25 6:45am

Safety comes first when traveling with children. Automatic AT or CVT transmissions are recommended. Automatic transmissions are easy to operate, reducing distractions during emergency braking for enhanced safety. CVT provides a smooth ride without jolts, preventing car sickness in children. Manual transmissions can be troublesome for beginners or in hectic situations, while dual-clutch transmissions may cause uncomfortable jerks for kids. In terms of fuel efficiency, CVT is more economical, making it ideal for family road trips. Although automatic transmissions consume slightly more fuel, they offer better stability. If on a tight budget, an entry-level automatic model is sufficient—avoid used transmissions with potential issues as maintenance can be costly. Safety is priceless; choose responsibly for your child.

Was this review help?
18
1
Share
Expand All
More Forum Discussions

Until When is the Highway Toll-Free?

In 2021, passenger vehicles can enjoy toll-free highway access for a total of 22 days, which are during the Spring Festival, Qingming Festival, Labor Day, and National Day. The first toll-free holiday in 2021 is the Spring Festival, from February 11 to February 17. Below are the specific toll-free periods for highways: 1. Spring Festival: February 11, 0:00 - February 17, 24:00, totaling 7 days. 2. Qingming Festival: April 3, 0:00 - April 5, 24:00, totaling 3 days. 3. Labor Day: May 1, 0:00 - May 5, 24:00, totaling 5 days. 4. National Day: October 1, 0:00 - October 7, 24:00, totaling 7 days.
2
2
Share

Does Traction Control System Failure Affect the Vehicle?

Traction control system failure does affect the vehicle and may lead to the following issues: 1. Fuel system malfunction: Causes reduced fuel injection, such as clogged injectors, low fuel pressure, or impurities in gasoline. 2. Inaccurate air measurement: Results in discrepancies between detected and actual air intake. If detected intake is lower than actual, the PCM-calculated fuel injection will be less than required, causing oxygen sensor feedback to indicate a lean mixture, prompting the PCM to increase fuel injection and positive fuel trim values. 3. Inaccurate closed-loop feedback signals: For example, faulty oxygen sensors.
15
5
Share

What Causes the Buzzing Sound in Car Audio?

The reason for the buzzing sound in car audio is that the amplifier's input signal cable uses shielded wiring, and the cable's mesh layer needs to be grounded. The power wiring of the amplifier should be connected from back to front, and the power should not be connected at the input end. During amplifier wiring, there should be no grounding phenomenon in the middle, as grounding is equivalent to creating a ground loop, causing eddy current crosstalk. Here are some solutions for the buzzing sound in car audio: 1. If the amplifier device malfunctions, it is likely due to poor contact (loose connection), causing the buzzing sound in the car audio. In this case, you need to locate the loose connection and secure it properly. 2. If the issue is due to poor-quality speakers, you should negotiate with the supplier, as this involves the design and installation of the audio system. It is best left to professionals. 3. If the buzzing sound increases with the throttle, it is highly likely due to a grounding issue (caused by ground potential difference). In this case, the amplifier's grounding needs to be addressed. However, this task is quite complex and involves many integrated circuits. Incorrect wiring may pose safety risks. 4. The most straightforward solution is to install an audio filter, which can completely eliminate the current-induced noise.
10
2
Share

How Many Years Can a New Car Be Exempt from Inspection?

New cars are exempt from inspection for six years, during which they can enjoy two opportunities for exemption from on-site vehicle inspection. Owners of new cars that qualify for exemption only need to collect the annual inspection sticker every two years during the exemption period, without having to undergo on-site inspection. If the vehicle does not qualify for exemption, it must undergo annual inspection according to the relevant regulations for motor vehicle inspection. The following are the specific conditions for the six-year exemption policy for new cars: 1. The motor vehicle must be a non-commercial vehicle; 2. The vehicle's approved passenger capacity must be six or fewer; 3. The vehicle type specified on the driving license must be a sedan, micro ordinary passenger car, micro off-road passenger car, small ordinary passenger car, small off-road passenger car, or small special passenger car; 4. The registration date must be after September 1, 2010; 5. The vehicle must meet all the above conditions and must not have been involved in any traffic accidents causing casualties during the exemption period.
9
4
Share

Should All New Cars Be Equipped with Engine Guards?

It is advisable to install an engine guard for new cars. The primary function of an engine guard is to prevent impacts from road surfaces or gravel on the engine. Some vehicle models come with factory-installed guards, while the majority require aftermarket installation. Here are the specific types of engine guards available: 1. Steel: More affordable and currently the most popular choice among car owners. Its advantage lies in its high hardness, effectively protecting against threats from mud, stones, or undercarriage scrapes. 2. Reinforced Resin: Lighter in weight compared to steel guards, it can also resist mud and stones. However, its overall strength is inferior to steel, making it unable to withstand high-impact damages like undercarriage scrapes. 3. Hard Plastic: Its benefits include light weight and low cost. Many vehicle models come with factory-installed plastic guards, but they have poor durability and can only protect against minor scratches. 4. Aluminum Alloy: Priced similarly to steel guards, its advantage is being lighter than steel, thus not adding extra fuel consumption. However, in terms of hardness, aluminum alloy is far inferior to steel guards.
9
4
Share

How to Repair a Scratch Line on a Car?

There are several methods to repair a scratch on a car: 1. Scuff: If the car has a scuff, the repair method involves filling the damaged area with a coating agent that matches the car body. 2. Minor Scratch: Clean the scratched area and apply primer. Wait for the primer to dry before applying paint. 3. Small Scratch: If it's just a very shallow scratch on the surface paint, immediately treat it with a compound. 4. Deep Scratch Without Exposing Primer: Apply touch-up paint, wait for it to dry completely, and then apply fine wax. 5. Deep Scratch Exposing Primer: Wash and dry the car, apply rust remover to the scratch, wait for 10~15 minutes, wipe off the rust remover with a tissue, and then proceed with touch-up paint.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.