How to Check Where Your Car Has Been Driven?

Can a Three-Cylinder Engine Be Replaced with a Four-Cylinder Engine?

Theoretically, a three-cylinder engine can be modified into a four-cylinder engine. The differences between a three-cylinder engine and a four-cylinder engine are as follows: Different in Size and Weight: A three-cylinder engine is relatively small and light, saving space in the car and facilitating vehicle layout. A four-cylinder engine is heavier and larger in size. Different in Fuel Consumption: A three-cylinder engine has a smaller displacement and is more fuel-efficient. A four-cylinder engine has one more cylinder than a three-cylinder engine, making it relatively more fuel-consuming. Different in Power: The torque platform of a turbocharged three-cylinder engine is relatively narrow, making it prone to insufficient power. A four-cylinder engine has relatively more sufficient power. Different in Cost: The structural design of a three-cylinder engine is simpler, with relatively lower production costs, and maintenance and repairs are also cheaper. The production cost of a four-cylinder engine is higher.

20

2

Share

How to Remove Odors in a New Car?

Place activated charcoal in the car. Activated charcoal has a strong ability to adsorb toxic gases. When harmful gases in the air come into contact with activated charcoal, they are adsorbed onto it, thereby purifying the air inside the car. Whether it's a new or old car, it is recommended to keep activated charcoal in the vehicle long-term. Regularly use photocatalyst. Photocatalyst is a new odor-removal technology that involves spraying nano-sized photocatalytic semiconductor materials onto the surfaces of interior materials. Under light, it produces a strong catalytic degradation effect, effectively breaking down harmful gases in the car, removing formaldehyde, and providing antibacterial and disinfecting benefits. Use a car air purifier. Car air purifiers are compact and lightweight, allowing them to be placed in corners of the car. They effectively purify the air inside the vehicle and eliminate formaldehyde odors, making them one of the most effective methods for removing odors in cars today. Avoid exposing the interior to direct sunlight. Why does the odor become stronger when exposed to the sun? It turns out that direct sunlight causes the car's interior materials to release more toxic gases, and higher temperatures also cause toxic substances sealed in unseen areas to volatilize. Therefore, it's best to avoid parking the car under direct sunlight whenever possible. Try to park in underground parking lots or shaded areas and apply reflective window film to the car.

16

4

Share

How Long Can You Park on the Highway?

There are no mandatory regulations on how long you can park in the emergency stopping lane on the highway, but vehicles must leave the emergency stopping lane once the accident is resolved or the malfunction is fixed. The emergency stopping lane is designated for emergency use only; vehicles without malfunctions are strictly prohibited from parking in the emergency stopping lane for extended periods, and it cannot be used for passage. Any vehicle driving in the emergency stopping lane is considered a violation. Precautions for parking in the emergency lane are as follows: If you encounter an unavoidable issue such as a malfunction, park the vehicle in the emergency stopping lane, turn on the hazard warning lights, and place a warning sign 150 meters behind the vehicle. During nighttime, rain, fog, or other adverse weather conditions, you should also turn on the side marker lights, tail lights, and rear fog lights. All passengers must move to a safe area. If necessary, promptly call the highway emergency number to request assistance. In case of traffic congestion ahead, parking or queuing in the emergency stopping lane is prohibited. Vehicle repairs are prohibited on highway bridges crossing rivers. If a driver's vehicle malfunctions and requires parking for repairs but fails to immediately turn on the hazard warning lights or move the vehicle to a location that does not obstruct traffic, penalties may apply. If a vehicle becomes immobile due to a malfunction or accident and fails to use lights or set up warning signs as required, the driver may be fined. Below are precautions for driving on the highway: Follow traffic rules: New drivers should pay attention to traffic regulations and display a novice driver sign. Highway speed limits: Check your vehicle before entering the highway. The minimum speed on the highway must not be lower than 60 km/h, and the maximum speed must not exceed 120 km/h. Merge early: When exiting the highway, merge into the outermost lane in advance. Pay attention to roadside signs indicating distances of 1.5 km or 1 km to prepare for merging. Maintain a safe distance: Keeping a safe distance is the most important factor for safe driving. Many inexperienced drivers misjudge distances, follow too closely, and may not brake in time.

17

3

Share

Should You Hand Over the Car Keys When Washing Your Car?

When washing your car at a car wash, it's best for the owner to keep the car keys themselves. The staff at car washes can be quite diverse, with many people coming and going. If the car keys were to get lost, it would indeed be quite troublesome. 1. Keep your keys with you: It's safer to hold onto your keys while at the car wash. Moreover, it's best not to hand over the car keys to others for safety reasons. A car wash typically takes about 20 minutes, during which both the interior and exterior of the car are cleaned. Whether you're familiar with the place or not, it's advisable not to give your car keys to the car wash staff. 2. Common practice: The usual approach is to remove the car key, open all four doors, and not wander too far away. Even during routine maintenance at a 4S shop, don't just hand over the keys to the service technician and walk away. Instead, engage in a conversation with the technician, ask about some basic car knowledge, and build a rapport. This way, they are more likely to service your car as if it were their own.

18

1

Share

How many points are deducted for stalling the car in Subject 2 exam?

Stalling the engine once due to improper operation will result in a 10-point deduction. Other common situations that lead to point deductions include: Vehicle crossing the line, failing to enter the reversing area, stopping midway, not following the prescribed route or sequence, or exceeding the time limit will result in a 100-point deduction. For slope parking: if the right side of the vehicle is more than 30cm from the roadside line after parking, 10 points will be deducted; if more than 50cm, 100 points will be deducted; crossing or touching the line will result in a 100-point deduction; if the front bumper is not aligned with the pole line and the deviation is within 50cm, 10 points will be deducted; if the deviation exceeds 50cm, 100 points will be deducted. Subject 2 has a full score of 100 points, with evaluation criteria set for failure, 20-point deduction, 10-point deduction, and 5-point deduction. The exam is passed under the following conditions: ① For large buses, tractors, city buses, medium buses, and large trucks, a score of 90 or above is required; ② For other vehicle types, a score of 80 or above is required.

16

4

Share

What Causes a Car to Start Immediately When Cold but Not When Hot?

The reasons why a car starts immediately when cold but not when hot are: 1. Carbon deposits: At high temperatures, carbon deposits have a strong adsorption effect on gasoline. If there are excessive carbon deposits on the intake valve, throttle valve, or piston, they can adsorb some fuel, leading to an overly lean air-fuel mixture and affecting startup. 2. Coolant temperature sensor: The coolant temperature sensor adjusts the fuel injection pulse width. If it malfunctions and fails to provide the correct temperature signal, it will affect the engine's fuel injection, causing an abnormal air-fuel ratio and making startup difficult. 3. Intake air temperature sensor: Similar to the coolant temperature sensor, the intake air temperature sensor also adjusts the fuel injection quantity. A higher intake air temperature sensor reading results in a richer mixture, while an open circuit or poor grounding can cause an overly lean mixture. Both overly rich and lean mixtures can make starting difficult. 4. Fuel quality issues: After a hot engine shutdown, the engine compartment remains at a high temperature. If the fuel is prone to evaporation, it can form high vapor pressure in the fuel rail. When this pressure exceeds the fuel system's pressure, it creates vapor lock, causing the fuel injector to spray overly lean fuel vapor, making starting difficult. 5. Fuel injector leakage: Due to the high temperature immediately after engine shutdown, leaking fuel can turn into vapor and enter the intake manifold. A hot start under these conditions can result in an overly rich mixture, making starting difficult.

8

3

Share

How to Check Where Your Car Has Been Driven?

Can a Three-Cylinder Engine Be Replaced with a Four-Cylinder Engine?

How to Remove Odors in a New Car?

How Long Can You Park on the Highway?

Should You Hand Over the Car Keys When Washing Your Car?

How many points are deducted for stalling the car in Subject 2 exam?

What Causes a Car to Start Immediately When Cold but Not When Hot?

What Does Exeed Mean?

What is the general speed limit on national highways?

What does repairing brake pads mean?

Should the accelerator and brake be operated with one foot or two feet?