···
Log in / Register

How to Check Vehicle Transfer Information?

4 Answers
SanIsaac
07/29/25 5:37pm

To check vehicle transfer information, you need to bring your ID card to the local vehicle management office for inquiry. Below is relevant information about vehicle transfer: 1. Concept of vehicle transfer: Each car has a fixed registration, just like a person. The car registration mainly records the owner and address of the car, as well as some related car parameters. Vehicle transfer refers to changing the name of the vehicle owner, which is also the most important step in buying a used car besides checking the car's condition. 2. Documents required for vehicle transfer: Original owner's ID card, new owner's ID card, original/duplicate of vehicle license, purchase tax certificate, vehicle and vessel tax payment certificate, motor vehicle registration certificate, motor vehicle inspection report, insurance policy/card/invoice. All of the above must be provided in original.

Was this review help?
19
0
Share
Todd
08/14/25 8:54am

I remember last time when helping a friend check a used car, we drove directly to the local DMV. After queuing for a while, we just needed the copy of the owner's ID and the vehicle identification number, then filled out an application form. It usually costs a few dozen RMB. Their archives clearly record each transfer date and previous owner information. That time we found the car had an accident record, which scared me into giving up the deal immediately. There are also official apps online, like the Traffic Management 12123 or Alipay, where you can try, but you need to register and bind your identity first. I think this task should be done in person, and it's good to check the original vehicle registration certificate while you're at it to avoid being scammed. After all, cars with too many transfers are prone to issues, so checking in advance saves both money and hassle.

Was this review help?
12
5
Share
Expand All
MacDaniella
10/13/25 8:02am

As a used car buyer, I'm accustomed to checking the vehicle history report first. CARFAX or domestic Autohome report websites are quite useful—just enter the VIN, spend a little money, and you can access records like transfer history and accident records. If the seller is unwilling to provide it, I go to the DMV myself to retrieve the report, remembering to bring a copy of the vehicle registration. During the check, pay close attention to date consistency to avoid situations like last time when I almost bought a car with a rolled-back odometer. I recommend taking screenshots of the results in advance for easy comparison. The whole process requires careful attention—cars with messy transfer records are likely problematic. Spending an extra ten minutes on verification can save you major trouble later.

Was this review help?
6
4
Share
Expand All
RicardoMarie
11/27/25 2:13am

I quickly handled the vehicle transfer inquiry using a mobile app. Download the 'Traffic Management 12123' app, log in, navigate to 'Motor Vehicle Services', select 'Information Inquiry', and enter the license plate number and VIN. Results are available within minutes. The data displays transfer records clearly, including dates, locations, and previous owner lists. The cost is usually around ten yuan, which is quite cost-effective. Online platforms like the WeChat mini-program 'Che Yi Cha' are also good options, saving the hassle of visiting the DMV. But remember to verify details to avoid input errors—key is to ensure buying safety, don't risk big for small gains.

Was this review help?
4
3
Share
Expand All
More Forum Discussions

What do the three letters CRV stand for?

CRV is the abbreviation for City-Recreation-Vehicle, meaning: Urban Multi-Purpose Recreational Vehicle. Below are the specific details about the Honda CRV: 1. Powertrain: The Honda CRV is equipped with two i-VTEC engines, a 2.0L and a 2.4L. The 2.0L engine has a maximum power output of 114 kW and a maximum torque of 190 N·m; the 2.4L engine has a maximum power output of 140 kW and a maximum torque of 222 N·m. 2. VTEC Technology: The Honda CRV features VTEC engine technology, which stands for Variable Valve Timing and Lift Electronic Control System. Unlike conventional engines, VTEC engines differ in the number of cams and rocker arms and their control methods, featuring two distinct sets of valve drive cams for low-to-medium and high speeds, with automatic switching via electronic control system adjustments. Through the VTEC system, the engine can automatically adjust valve opening times and lift based on driving conditions, thereby altering intake and exhaust volumes to achieve increased power, reduced fuel consumption, and lower emissions.
1
3
Share

What is the oil specification in the Octavia maintenance manual?

The oil specification in the Octavia maintenance manual is 5W-40, but both 5W-40 and 5W-30 can be used. For later maintenance oil changes, you can choose brands such as Mobil, Shell, Castrol, or Total. The viscosity of the oil changes with temperature, so special attention should be paid to its performance under low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity—5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, ensuring smoother cold starts for the car. The second number represents the oil's kinematic viscosity at 100°C. A higher value means the oil can maintain its viscosity index better at high temperatures, which can also be understood as providing better lubrication performance under high-temperature conditions. The method for changing the oil in the Octavia is as follows: Wait for the engine temperature to drop, allowing the oil to flow back into the oil pan; Use a wrench to loosen the oil drain plug and place an oil pan underneath to catch the old oil until it stops flowing. Start the engine for about 30 seconds to allow the oil in the main oil passage to drain out; Use a special wrench to remove the oil filter; Apply oil to the seal of the new oil filter and tighten it clockwise by hand; Add the new oil through the engine valve cover filler port, typically filling about three-quarters of the bottle; Start the engine and let it run for 5 minutes, checking for leaks around the oil drain plug and oil filter. If any leaks are found, perform repairs; After stopping the engine, pull out the oil dipstick and check that the engine oil level is within the standard range.
11
0
Share

Where can I get my car windshield repaired?

Minor cracks can usually be repaired, but severe damage requires complete windshield replacement. You can visit car 4S shops, auto repair shops, or specialized glass stores for windshield replacement. There are two types of automotive glass: laminated glass and tempered glass. When laminated glass is damaged, the PVB film between the two glass layers prevents complete shattering. Even under severe impact, the glass won't fall apart completely, maintaining relative integrity without dangerous flying fragments. This makes laminated glass ideal for windshields. (After minor collisions, only small cracks appear, making repairs possible.) Tempered glass, when damaged, quickly fractures into countless small pieces, making the entire panel prone to shattering. This design facilitates passenger escape during emergencies, which is why it's commonly used for side windows and rear windshields. Windshield replacement details: As laminated glass, minor impacts may only damage the surface layer, allowing for crack repairs. However, severe impacts damaging the inner layer or causing extensive cracks/breaks require immediate replacement. The replacement process typically takes about four hours: removing the original glass (1-2 hours), cleaning old adhesive, applying new adhesive, installing the new glass, and letting it cure for approximately one hour until the adhesive hardens.
10
1
Share

Where is the seat heating button in the Magotan?

Magotan seat heating button is located in front of the gear lever, above the air conditioning buttons, and the first button from the left is the seat heating button. Taking the 2020 Magotan as an example, it belongs to the mid-size car category, with body dimensions of: length 4865mm, width 1832mm, height 1471mm, wheelbase 2871mm, fuel tank capacity 66l, and curb weight 1445kg. The 2020 Magotan features a front MacPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 1.4L turbocharged engine, delivering a maximum horsepower of 150ps, maximum power of 110kw, and maximum torque of 250nm, paired with a 7-speed dual-clutch transmission.
3
2
Share

What are medium-sized and above passenger and cargo vehicles?

Medium-sized and above passenger and cargo vehicles refer to those with 8 or more seats but no more than 19 seats, and a vehicle length within 6 meters. If the vehicle length exceeds 6 meters, regardless of the passenger or cargo capacity, as long as it is classified as a passenger vehicle, it is considered a large passenger vehicle. Below is relevant information about large passenger vehicles: 1. Introduction to large passenger vehicles: Large passenger vehicles are those with a length exceeding 6 meters. These vehicles often cover distances of several hundred kilometers. Some are entirely equipped with seats, while others are fully equipped with berths, commonly referred to as "sleeper buses," and include racks or compartments for passengers' luggage. 2. Development of large passenger vehicles: In 2010, the cumulative sales of large and medium-sized passenger vehicles reached 143,372 units, a year-on-year increase of 25.35%; large passenger vehicles grew by 38.45%, and medium-sized passenger vehicles by 14.74%.
13
3
Share

Can the wheel hub color be changed?

Can the wheel hub color be changed? According to relevant traffic management regulations, there are no explicit rules regarding the color of wheel hubs, and the color of wheel hubs is not included in the 30% color change limit for the entire vehicle. Changing the wheel hub color will not affect road legality or annual inspections. The wheel hub is the rotating part of the tire's inner rim connected by pillars to the wheel core, which is the metal component mounted on the axle that supports the tire. Methods for maintaining wheel hubs include: 1. When the vehicle is in a humid area, the wheel hubs should be cleaned frequently to prevent salt corrosion on the aluminum surface; 2. If necessary, after thorough cleaning, wax can be applied to the wheel hubs to maintain their shine; 3. When the wheel hubs are at a high temperature, allow them to cool naturally before cleaning. Do not use cold water for cleaning, as it can damage the aluminum wheel hub, cause brake disc deformation affecting braking performance, and using cleaning agents on the wheel hubs can lead to chemical reactions on the surface, resulting in loss of shine.
9
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.