How to Check Traffic Violations for Non-Owners?

1 Answers
DiJocelyn
07/30/25 10:45am
Non-owners can check traffic violations through the following methods: 1. Visit the traffic management department: Bring your ID card, driver's license, and the vehicle's registration certificate to the traffic violation processing hall or window of the traffic management department for inquiry and handling. 2. Check via the 12123 traffic management app: To check on the 12123 app, you need to register the non-personal vehicle under your driver's license and 12123 account, then you can check the traffic violations for that vehicle. 3. Check on the traffic management platform: On the main interface menu bar of the comprehensive traffic safety service platform, enter the vehicle type, license plate number, and the last six digits of the engine number, then contact the vehicle owner to send the verification code for inquiry.
Was this review help?
1
0
Share
More Forum Discussions

How to Deal with a Dead Car Battery?

The methods to handle a dead car battery are: 1. Push-start method: One person pushes the car from behind while another inside the car depresses the clutch and engages the gear. Once a certain speed is reached, ignite the engine while giving it gas, then quickly depress the clutch pedal after the engine starts. 2. Jumper cable method: Find a car with a working battery, position the two cars facing each other, open the hoods, and use jumper cables to connect the positive terminals to positive and negative to negative. The reasons for a dead car battery include: 1. Battery depletion; 2. Spark plug failure; 3. Fuel filter malfunction; 4. Electrical circuit failure; 5. Mechanical failure; 6. Engine carbon buildup.
12
4
Share

How to adjust the time on Roewe 350?

The method to adjust the time on Roewe 350 is: 1. Locate the time adjustment button on the lower right side of the vehicle's dashboard; 2. Press and hold the time adjustment button, release and briefly press after the hour digits start flashing, then adjust to the corresponding number; 3. After setting the hour, release and wait for 3 seconds, it will automatically switch to the minute digits; 4. Briefly press the time adjustment button to adjust to the corresponding number. Taking the 2015 Roewe 350 Manual Luxury Sunroof Edition as an example, it is a compact car under SAIC Motor, with body dimensions of: length 4521mm, width 1788mm, height 1492mm, wheelbase of 2650mm, fuel tank capacity of 55l, and trunk capacity of 458l.
16
4
Share

What Are the Symptoms of a Bad Shock Absorber?

Here are the symptoms of a faulty shock absorber: 1. Oil leakage. Use a flashlight to inspect the shock absorber through the wheel arch. If oil leakage is found on the exterior of the shock absorber, it indicates damage. 2. Loose chassis. When driving on rough roads, if the vehicle exhibits excessive bouncing or unstable swaying, it usually indicates a problem with the shock absorber. 3. Abnormal noises. If the shock absorber produces unusual noises while driving on rough roads, it is highly likely damaged. 4. Uneven tire wear. A damaged shock absorber causes unstable wheel vibrations during driving, leading to phenomena like wheel tilting. This results in severe wear on the part of the tire in contact with the ground, while the unaffected part remains unworn, creating uneven wear patterns.
15
0
Share

What Causes the Clicking Sound When Starting and Braking?

There are three possible reasons for a clicking sound when starting and braking: 1. Excessive wear on the brake disc and brake pads. The edge of the brake disc may develop a raised area due to wear, causing noise when new brake pads cannot fully align with the disc during braking. Brake discs and pads are high-wear components, as they constantly rub against each other during braking. When excessively worn, they produce noise and require regular maintenance and replacement. Typically, brake pads should be replaced every 60,000-80,000 kilometers, while brake discs should be replaced every 100,000-120,000 kilometers. 2. Incorrect installation or mismatched brake pad models can also cause noise. Most brake pads are made of semi-metallic or semi-asbestos materials. If the metal in the pads is too hard, it may generate noise during braking. 3. Faults in the caliper, brake disc, or brake pads can also produce this sound. If the noise persists, first check for dragging brakes. Poor caliper retraction can cause prolonged friction between the disc and pad, leading to noise under certain conditions. Additionally, foreign objects on the brake pads or discs can also cause abnormal sounds.
20
0
Share

What Problems Will Occur If the Antifreeze Is Insufficient?

Insufficient antifreeze will prevent the normal circulation of the coolant, causing the car engine to fail to dissipate heat properly, leading to an overheating engine. In severe cases, it may result in engine damage. The role of antifreeze: Antifreeze is a type of coolant containing special additives, primarily used in liquid-cooled engine cooling systems. It has excellent properties such as preventing freezing in winter, boiling in summer, and offering year-round protection against scale and corrosion. How to choose antifreeze: The basic indicators of antifreeze are its freezing point and boiling point. On the market, antifreeze comes in several specifications with freezing points of -15°C, -25°C, -30°C, -40°C, etc. Generally, it is advisable to choose one that is at least 10°C lower than the lowest temperature in your region. Can different antifreeze brands be mixed? It is necessary to use the same brand of antifreeze. Different brands of antifreeze may have varying production formulas. If mixed, the multiple additives may undergo chemical reactions, rendering the additives ineffective.
1
4
Share

What is the Function of the Clutch?

The clutch serves to gradually engage the engine with the drivetrain, ensuring smooth vehicle startup. Below are detailed explanations of the clutch's functions: 1. The clutch is located inside the flywheel housing between the engine and the transmission. The clutch assembly is secured to the rear plane of the flywheel with screws, and the clutch output shaft serves as the transmission input shaft. During driving, the driver can press or release the clutch pedal as needed to temporarily disconnect or gradually engage the engine with the transmission, thereby cutting off or transmitting the engine's power to the transmission. 2. The clutch allows the engine to disengage from the drivetrain, enabling gear shifting in the transmission. Then, by gradually releasing the clutch pedal, the clutch engages progressively. During this engagement process, the resistance torque on the engine increases gradually. Therefore, the accelerator pedal should be pressed simultaneously to gradually increase the fuel supply to the engine, maintaining the engine speed at the minimum stable level without stalling. 3. As the clutch engagement tightens progressively, the torque transmitted from the engine to the drive wheels via the drivetrain increases gradually. Once the traction force is sufficient to overcome the starting resistance, the vehicle begins moving from a standstill and accelerates progressively.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.